Your cart is empty.
Your cart is empty.Wiring overhead cons
Jack
Reviewed in the United States on May 4, 2023
Pretty easy install but was not without challenges (unrelated to the wiring harness). Be prepared for something to break. The plastic gets brittle over 20+ years. One of the removal tabs and one of the garage door opener cover hinges both broke on mine. Watch for the broken pieces as you remove your overhead console. I was able to repair them using the ultraviolet light-cured plastic. Removing the old harness is a little challenging. The bulb sockets are held in place by a ridge that prevents them from coming out except with some prying and manipulating. The spring-button light switches are also held in by the pressure of the slide channel into which they fit. I had to route my wires from the display a little differently than the stock one ran, because the replacement was slightly shorter. The connector in that display was a little 'tricky' too. Steps for console removal: press the two tabs (inside garage door opener lid) forward. Pull the front of console slightly down. Slide the whole console FORWARD to disengage the two plastic 'clips' in the back above the sunglass storage. Note: this is counter intuitive. You would normally expect the console to move backward to release. Reverse the process to reinstall. Removal and install time about 30 minutes (not including plastic repairs).
David K. MacArthur
Reviewed in the United States on March 6, 2023
I have a '99 Dodge Ram 2500 QC with the factory overhead console. This fixes the broken map light switches with a factory part. Excellent quality.
Christopher Spoelstra
Reviewed in the United States on February 13, 2023
Perfect replacement for 1999 Dodge Ram 1500 overhead console wiring with information screen. I needed new map light switches and this wiring harness was the fix I needed.
metal06260
Reviewed in the United States on March 24, 2022
Works Great! A bit hard to install as the wires are just a little too short. I got it to fit though and I have map lights again.
ShopGuy
Reviewed in the United States on December 25, 2022
Product fit and worked just as the original. Purchased for a 99 Dodge Ram to replace the overhead light push buttons.
Corey S
Reviewed in the United States on January 5, 2021
OEM fit on a 2001 ram with overhead console with computer. Buy this one if you have a computer in your overhead console.
The Big Broad For God
Reviewed in the United States on June 6, 2019
If You Have A Vin Z, 2001 Dodge Ram1500 4x4, With The Laramie/SLT Package Built AFTER April 2001,•This switch harness Will Fix Your Broken Overhead Console Switch Issues. *But Be Warned—The PlasticConsole Housing Must Be Removed To Replace the switch which is a harness of wiring and switches,WHICH, due to age, may cause theplastic Console Housing To Break!*-However, ‘IF’ Your Gen 2 hasn’t beensetting out in the sun much,(like mine) don’t hesitate to fix yourMap/or/Upper Console Lights!•Lastly, Amazon’s Guide Feature Showed me 2-switch Harnesses ThatSaid the part, “Fits My Car”.—Be Careful! The Part Ending In ‘AA’Fit Mine, Not The Part Ending In ‘AB’.•I Bought Both, Not Knowing WhichPart Was ACTUALLY Correct. Then sent the other back. Be aware thatYou have 30 days(usually) To Get aRefund, if you are unsure which partIs correct for your ram 1500.
Ms G
Reviewed in the United States on October 25, 2017
easy to install
Recommended Products
$12.99
$ 6 .99 $6.99