Your cart is empty.
Your cart is empty.The SC-RMAA Rack Tube Attachment Mount is a clamp that fits over the top of avertical 1-1/2" Rack Pipe so that you can attach additional 3/4", 1/2" and 7/8"diameter cymbal, tom and other accessory arms.
Customer
Reviewed in the United States on September 20, 2024
I always wondered how drummers were mounting cymbals through the vertical tubes of their racks. This is how! These saved me in a pinch. Trying to get my kit together and was getting antsy and having to reconfigure due to comfort and space available. I had just a few cymbals left to mount on my rack and this was my solution. I bought a few and they worked flawlessly and look cool as well.
Nemesis
Reviewed in Germany on March 22, 2023
Das Teil ist super! Schnell montiert und wirklich bombenfest.Bei billigeren und meist einfacheren Klammern wird das Beckenhalterohr immer schräger beim Anziehen der Flügelmutter.Das Phänomen verstärkt sich noch, je dicker das Rohr ist, das an der Klammer eingeschoben wird.Bei dieser Klammer sieht alles super aus nach der Montage und durch die 3 verschiedenen beigelegten Kunststoffeinsätze, werden die Becken - oder Tomrohre nicht durch das Festklemmen beschädigt.
Mango
Reviewed in Canada on January 20, 2021
The bushings in here make all the difference.
RichS
Reviewed in the United States on July 19, 2020
I have 3 of these mounted on the 1.5" tubes for my electronic drum rack. Have cymbals mounted on 2 of them and my drum brain mounted on the 3rd one. Very solid. Very happy.
Gary Breza
Reviewed in the United States on January 2, 2020
Removed the previous mount for this one because of the plastic sleeve which comes with 3 sizes to choose from. Great choice as the grip is firm and non slip and will not damage the down tubes
Samuel Garcia
Reviewed in Mexico on March 24, 2019
De lo mejor para hardware de batería, cada pieza construye un todo, este clamp venía con 3 medidas distintas de tubo interior en resistentes materiales para adaptar a cualquier tubo estándar
Flo
Reviewed in the United States on December 11, 2019
Excellent mount. I went back and bought a second one.I have a large Gibraltar drum rack with two other built in mounts (they came with the rack system) and I needed a third mount option. First of all, the stock mounts are ok, at best. Depending on the diameter of the boom, it may need an additional lock just to hold a cymbal boom from turning out of position. But this one was perfect, super solid, easy to use, and comes with three different plastic inserts for various diameters. Plus, it uses the standard drum key to tighten onto the rack tube, instead of a hex key.Highly recommended.
Marco
Reviewed in Italy on September 10, 2018
Ottimo prodotto per sfruttare al meglio il rack diminuendo il numero di aste.Si colelgano facilmetne ed in modo robusto (no rotazione) ai tubi rack standard.Le tenute in dotazione permettono di adattarsi a tutte le aste in commercio.Acqusti consigliato!
byron
Reviewed in the United Kingdom on August 21, 2018
Fantastic peice of kit, two boom stands without the tripod legs !!
PM Productions
Reviewed in the United States on December 6, 2018
OK, at first glance this item may look like just another tube cymbal arm clamp. DW, Tama, and a host of others put this on top of the tubes of their racks to allow you to mount a cymbal boom arm to the top of the rack uprights, space which is otherwise not utilized. This clamp is no exception. Pop out the plastic cap on your rack tube, loosen the drum key set screws on the clamp, slide it onto the tube and tighten the set screws. Then top it off with your favorite boom arm. Easy peasy. But this clamp has a couple tricks in the form of the sleeves (okay, bad pun). Remove the 3/4" nylon insert (you'll have to completely remove the wing nut and hex nut from the clamp) and swap it our for one of the larger inserts (7/8" or 1") and this clamp will now accommodate a variety of tom arms, the top sections of snare stands, and other mounts that previously were only usable on the standard horizontal rack clamps. I found it especially handy to mount the top of a double-tom stand in the center of a double bass set-up, on top of the one rack leg I have centered between the two kicks. The possibilities are really endless. For about the same price as the other company's one-trick ponies, you can have a much more usable and versatile clamp. Nice job Gibraltar!
Z
Reviewed in the United States on November 26, 2018
This is a quality piece, a bit heavy.The clamp did NOT hold my 9/16" yamaha dtx cymbal arm as stated down to 1/2" in description. I used the smallest insert and still too big to clamp properly. Luckily I have a sizing bushing from the yamaha e drum clamp. It worked then.I also think that a design that uses a clamshell type clamp to fasten it to the rack would be better than the 2 set bolts that dig into and mar the rack tube.
R. A. Head
Reviewed in the United States on April 14, 2018
This is solid, and simple. Works! Plus the added inserts to fit whatever I want! LOVE IT.
Drum 247
Reviewed in the United States on October 5, 2014
Good stuff right here. Fits my Gibraltar rack perfectly. Very well made, solid, and sturdy. Excellent product that looks even better in person than online.What I like:Looks very nice (something to consider)Works GREATVERY solid and "beefy"Overall quality is GREATHas plastic/rubber grommet on inside to protect your cymbal arm and helps grip it more tightlyGreat stuff, I highly recommend.do the math and get the best deal - although all offers are pretty darn good at the prices above (10-3-14 being $15.50 + tax, $16.15, and... good prices, cheap! not quality wise)
Recommended Products
