Your cart is empty.
Your cart is empty.Product Description
gofanco Coaxial/Optical Toslink Digital Audio Extender over Cat5e/6
Conveniently extend coaxial or optical Toslink audio signals up to 984 ft. (300 m.) over a single ethernet CAT cable. Keep your media devices in a clean and secure area while utilizing external speaker systems in remote areas. Streamlines audio installations by allowing source devices to be located in off-site or unseen rack.
Need Dolby TrueHD or DTS-HD Master 7.1 surround audio extension? Search AudioCATExt33 / ASIN: B08FXBHH44 or click on bottom comparison table link
- Supports coaxial and optical Toslink digital audio 5.1, Dolby Digital 5.1, DTS-HD 5.1, DTS-HD, and PCM (*DOES NOT support DTS-HD Mater or Dolby TrueHD 7.1 Audio formats*).
- PoC: Allows 1 power adapter to be connected to the TX to power the RX through the CAT cable (1 less power outlet and 1 less cable to connect).
- Receiver converts/extracts the incoming audio signal from either coaxial or Toslink and sends it to both outputs simultaneously. Utilize both your Toslink and coaxial speaker system at the same time.
- Extend coaxial or optical Toslink audio signals up to 984 ft. (300 m.) over a single ethernet CAT cable.
- Supplies clear digital audio over long distances as if connect locally.
- Audio transmitted digitally for zero signal loss.
This digital audio extender kit fits with various A/V applications such as:
- Bring your speakers outside and keep your sources inside during a backyard BBQ, birthday party, or other event.
- Utilize in lectures, training sessions, conferences, live stage events, and more.
- Broadcast audio publicly at retail stores, exhibitions, train stations, school events, etc.
*Only one input source can be used at a time on the transmitter side*
• Connect a Toslink device to the transmitter with a Toslink cable
• Only one input device is supported at one time
• The receiver can output audio to both Toslink and Coaxial outputs simultaneously
• PoC allows one power supply connected to the TX to power the RX via CAT cable
• Connect a Toslink device to the transmitter with a Toslink cable
• Only one input device is supported at one time
• The receiver can output audio to both Toslink and Coaxial outputs simultaneously
• PoC allows one power supply connected to the TX to power the RX via CAT cable
• Connect a Coaxial device to the transmitter with a Coaxial cable
• Only one input device is supported at one time
• The receiver can output audio to both Toslink and Coaxial outputs simultaneously
• PoC allows one power supply connected to the TX to power the RX via CAT cable
SIMPLE INSTALLATION
No driver required. Compact metal housing provides durability and minimizes EMI/RFI noise interference.
About Us
Our team at gofanco strives to become the preferred provider of audio video and connectivity solutions for enterprise, higher education, corporate, and residential environments by developing and offering the highest quality products at competitive prices. Our solutions are designed to add value and solve problems, while maintaining an elevated user-experience. We are dedicated to serving you, the customer, with lifetime s upport and will go the extra mile to make sure you are taken care of.
What's in the Package
- Coaxial/Toslink CAT5e/6 Extender – 300m (TX & RX Kit)
- 1x Power adapter (5V/1A)
- User’s guide
Jeff Z.
Reviewed in the United States on March 2, 2025
Worked Perfectly - Extended optical audio from overhead projector to AV Receiver over 100ft away using existing CAT6 runs.
Customer
Reviewed in Canada on February 6, 2025
One star it too generous for the piece of junk. There's a crackling noise in the audio and the product can't be returned or replaced. Big waste of money. Don't buy this!
II
Reviewed in the United States on February 14, 2025
For to the cost, was not expecting anything less than faultless operation and this is what we got (so far). Connected a TV, via optical, to this extender over CAT6 (24m) to Yamaha A6A, working flawlessly, no loss or delay whatsover. Highly recommended, let's now see if it lasts. Build quality looks good, so don't think it will just pack up in short time, but will see over time and update here if it does pack up.
BC
Reviewed in the United States on March 2, 2024
I am using this item with the RCA connection from a mixer over 200' via cat 6 cable to the 3.5mm stereo connection to the mic input of an ATEM Mini Pro. The volume and quality of the sound is good. This solution has solved my sound problems for live streaming.
Tim
Reviewed in the United States on December 31, 2023
Make sure you read the input verses the output as it only works the right way around. I tried it backwards and it doesn't work. LOL Had to set the Fire Stick 4k to PCM as my HDMI audio extractor has a digital coax out but it just buzzed on any other audio output format.
Brian, CT
Reviewed in the United States on November 2, 2023
These likely work OK but I couldn't get PCM on my TV, so they didnt work for my application. Looked like a quality build tho.
Scott
Reviewed in the United States on September 6, 2022
This is a awesome device. The Poe makes it very useful for many installations. I tried analog twisted pair extenders before and still get a lot of noise. This thing is very quick and has been working for over 6 months in on of my setups. Love it.
W. J. Meier
Reviewed in the United States on April 6, 2022
I installed this in a church to connect a Rodgers organ to an ATEM Mini for video streaming. The CAT5e cable length was about 130 ft with 4 additional connections in breakout boxes.The input and output used were both analog.The fact that it was powered from only the RX end simplified the installation.The noise level of this device is extremely low. I could not tell it was on unless the organ was playing.When I tried connecting the system with shielded analog cable the hum was unbearable.I recommend this device for anyone trying to run audio over long distances with a CAT5e cable.
AmazingBuys2020
Reviewed in the United States on May 30, 2020
I had an installation to complete which required a 85 feet long audio channel transmission. Optical alone proved useless due to the signal degradation, as the AV receiver couldn't decode the signal coming from the distant outdoors TV monitor. I connected 1-50 ft long optical cable, added a 35 ft optical cable via a coupler, with no good results. Then Ordered and installed this optical over Ethernet adapter and ran the entire distance a CAT-6 cable, added just to try out the 50 ft optical cable at the input device which has the power inserter on it, and at the other end, 85 ft away added the other adapter and then the 35 ft optical cable and on to the AV receiver. It worked flawlessly. It tells me that the booster in this adapter works great. Obviously there is no need to have such long optical cables at the input or output, but those will be replaced later on with 5 footers. Thank you for the solution!
Recommended Products