Your cart is empty.
Your cart is empty. Gosky Deluxe Telescope Camera Adapter Kit for SONY E-Mount (Mirrorless) Cameras
Fits Sony NEX ( E-Mount - Including NEX , A7 & VG Series ). Fits all SONY (E-Mount) cameras Including : A7, A7S, A7R, A7R II, A7S II, etc, and (APS-C Models) NEX 3, NEX 3n, NEX5, NEX 5n, NEX 5nk, NEX 5R, NEX 6, NEX 7, NEX 7k, NEX C3, NEX C3k, NEX F3, a5000, a5100, a3000, a6000, a7000, etc. As well as Sony Handycam Video Cameras VG10, VG20, VG30, VG900, etc
Included in this kit: a variable eyepiece projection adapter , a bayonet ring to Sony E-mount Cameras, a universal M42 to 1.25" T adapter. The bayonet ring combines camera with the variable eyepiece projection adapter or M42 to 1.25" T adapter.
The variable eyepiece projection adapter lets you adjust the adapter length to vary the magnification for perfect framing of your shots. It Fits all standard 1.25" astro telescopes and accepts filters (thread inside tube). The adaptor is comprised of two sections, the basic section (smaller section shown in picture above) is designed for use with SLR cameras via camera specific T2 mount for direct (prime focus) photography. When used with the tube it can accept a wide range of 1.25" eyepieces and eyepiece smaller than 37mm in diameter.The extending tube section slides to achieve variable magnification on projection photography. This can also be used for cameras with a filter thread (T/52 converter and approptiate stepping ring required). The M42 to 1.25" T adapter lets you to fit all standard 1.25" astro telescope.
NOTE： Not compatible with ETX 60/70/80 telescopes due to lack of back focus. Not recommended for Reflectors smaller than 4", Refractors smaller than 60mm or Catadioptrics smaller than 90mm.
Package Include: 1x a variable eyepiece projection adapter
1x a bayonet ring to fit SONY E-Mount (Mirrorless) Cameras
1x a universal M42 to 1.25" T adapter
Kindle Customer
Reviewed in the United Kingdom on February 2, 2024
Only received the ring no other parts
Aiden Pangborn
Reviewed in the United States on January 10, 2024
Only used it once, switched to prime focus, never looked back.
Steve F.
Reviewed in the United States on April 6, 2024
I should have trusted the other reviews that said it doesn't fit their Sony E-mounts. It's REALLY disappointing that whoever manufactured this didn't take 10 seconds to ensure the fit is right. The fins on the ring were completely off compared to my lenses that fit perfectly.Step up your game Gosky!!! Nothing "Deluxe" about this product!
Bob
Reviewed in Canada on July 24, 2023
Le produit livré n'est pas conforme à la description du produit.Il manque le pièce principale entre l'appareil photo et les autres tubesSans cette pièce, le produit est inutilisable.Aucune idée si c'est seulement un oublis de la part du détaillant.
Mr A J LOVISON
Reviewed in Australia on October 4, 2023
How can I use this item on the camera, when the T-Ring is missing. Reading other reviews, it is not the first time this has occurred.
DatGeek
Reviewed in the United States on March 22, 2021
works good for eyepiece projection photos. but a little hard to focus with the rough locking screws. but for the money you could not ask for a lot more.
LJM
Reviewed in the United Arab Emirates on January 12, 2021
Helped to connect my mirrorless dslr to the telescope, but haven't been able to focus. So unfortunately no images yet.
Curtis
Reviewed in the United States on April 30, 2020
2020-04-28 (dated because I plan to update)Just used this adapter for the first time and my impressions are very favorable. Solidly built of metal. Everything fit perfectly on my ETX 125 scope and Sony a6000 camera. The E-mount adapter fit my a6000 perfectly, snug but not overly tight, very similar to the fit of a normal E-mount lens.The extension tube adds some flexibility which they really should point out in the description. Not only does it allow limited zoom-like adjustment, albeit primitive, but you can also insert a 1.25" eyepiece inside the extension tube. These two features in combination create a lot of possible configurations.Note that this adapter does not fit the rear camera port on the ETX 125, but rather inserts into the eye piece port.I've only taken a few images of objects on land to get familiar with the setup and it has performed well. I will update after I have had the chance to use it more for astrophotography.UPDATE: 2020-05-015I've used this for a number of basic moon shots now and remain very pleased with it. Images attached are a composite/stack original images captured with this adapter and a Sony a6000 camera.
Mauricio
Reviewed in Mexico on December 5, 2019
Excelente calidad del producto. Funciona perfectamente para lo que lo necesito y esta fabricado con un material que se ve que será duradero.
Eno
Reviewed in the United States on January 23, 2019
Since the adapter is not providing an electrical signal between the camera and the lens you have to tell the Sony camera to release the shutter. You can do this by...Set the mode dial to Manual (M).Set the Release w/o Lens option in the camera menu to Enable.Set the Shutter lock option in the camera menu to Off: no lens.The buikd quality is very nice but it should come with a instruction manul since i was very confused for the first two nights i tried this out.
JBowl0101
Reviewed in the United States on March 15, 2017
Excellent. Eyepeice projection allows for higher magnification than prime focus photography, and you can set your desired magnification very precisely by changing your eyepiece or sliding the telescoping tubes in and out. Farther away is more magnification. You focus with the telescope's focuser, works great. Nice fit and finish, clean machining.
Nhan
Reviewed in the United States on April 15, 2017
This product works very well with my Celestron 130 SLT. I haven't taken it out yet, but i've done some ground test and the focus is nice with my DSLR. My only gripe is that, on my reflector telescope, it messes with the balance and if you tap the telescope the whole mount goes down. So I recommend adding a counterweight. On a cassigrain or a telescope with an EQ mount this shouldn't be a problem.
Don Corum
Reviewed in the United States on April 10, 2017
This product works very well if can bring the eyepiece you are projecting with in focus. I think you can check this for your individual telescope before you buy. The bottom of the Gosky adapter is the sleeve that fits into your 1.25 inch telescope receiver. The entire length of the eyepiece sits above that. This is a distance of about 1 inch higher then the eyepieces current focus position. So for your eyepiece to be able to focus, the focuser must be able to travel inward one inch from the current eyepiece focus position. Only simple plossi eyepieces will fit into the upper receiver. Each eyepiece has a different focus position so each you intend to use must be checked. For me, my 8 inch Orion reflector worked with a 25 mm plossi but was very marginal with my 10 mm plossi. My refractor telescope would not work with either.
Recommended Products
