Shopping Cart

Your cart is empty.

Your cart is empty.

Greenfield KS2S Bicycle Kickstand with Retro Kit.

Free shipping on orders over $29.99

$11.38

$ 5 .99 $5.99

In Stock

About this item

  • Center-mounted kickstand
  • Brushed aluminum finish
  • 305 mm (for bikes 22" and over)
  • For bikes without factory mounting plate (includes Retro top plate and bolt)
  • Made in the USA


Greenfield KS2-S Kickstands with retro top plate for improved clearance. Z Shape top plate fits more frames with tighter clearances behind bottom bracket.


SirHarley
Reviewed in the United States on August 11, 2024
Easy to install. Had to cut down a bit to get my bike to lean over. There are lines on the leg to guide your cut, and make the cut parallel to the ground. Works great!I also bought the little rubber foot that goes on the end so that it wont scratch my floor when my bike is indoors. It just slips on.
jewel3ca
Reviewed in Canada on July 18, 2023
Works….. exactly as advertised.Mount the thing, determine bike angle required and cut the leg to the desired length.
Lapinza
Reviewed in Spain on July 2, 2021
Muy buena calidad y acabado.El pliegue es muy bueno y la bisagra tiene un muelle de retorno que hace que al plegarse la pata se quede bien fija.Se puede cortar a medida muy fácil con una sierra para metal, trae marcas en mm para cortar a medida.
Lapinza
Reviewed in Spain on July 2, 2021
Muy buena calidad y acabado.El pliegue es muy bueno y la bisagra tiene un muelle de retorno que hace que al plegarse la pata se quede bien fija.Se puede cortar a medida muy fácil con una sierra para metal, trae marcas en mm para cortar a medida.
susan cochrane
Reviewed in Canada on July 28, 2019
My kickstand was broken for a while and now I’m very happy to have this kickstand. Works perfect.
Kiran K.
Reviewed in Canada on June 12, 2017
Good product. You still need to look out there for other stands to see which one would meet your need. Easy to install. I ride an XL bike which is meant for people from 6 feet and above and this stand was too long for me. I had to cut the stand off a little bit for the stand to actually work, or else my cycle kept falling over. So I would recommend to anyone with my bike size or smaller to go for the 285mm stand. This was something I had known would be a possibility while buying this product.P.S The pics are after I cut the stand
Music Lover
Reviewed in the United States on December 5, 2017
I initially was looking for a rear mounted kickstand for my 2018 Marlin Trek 5, but I was not satisfied with what was being offered. So, I opted for this center mounted kickstand. Out the box, it does not fit my bike, the top plate was too big. However, I grind down the plate with my Dremel and I was able to install it with no issues afterwards.My MT bike is a 29er and the kickstand keeps my bike propped up fine; I didn't need to modify the length at all.Although I am bummed I was not able to find a suitable quick-detachable rear-mounted kickstand, this kickstand serves its purpose well, albeit it's not easily detachable when I want to use my MTB for... well, mountain biking!I will attempt to post pics of my installation at a later time.
Peter M.
Reviewed in the United States on December 26, 2013
First off, let it be known that kick stands serve a single purpose! to hold your bike up, so why is this sooo amazing?Well, first off, its got an older mounting system that will fit almost every bike, including the new ones with special mounting systems. It holds in place well enough, it doesn't weigh 3000 tons, and its plenty long for your average 26 inch mountain bike. If you want it shorter, you can always man up and break out the hacksaw, If you want it longer, place something between the bottom plate and the frame to space it out. It's not going to be perfect unless you make it that way, or you're just lucky. you might even go so far as to put a little rubber shoe on it, though that makes it look terrible! Please note that this will scratch the crap out of your frame down there, but seeing as its out of sight, and will be covered anyway, this is not a problem for meOverall, strong and easy. Great buy for the price
RichJ
Reviewed in the United States on April 7, 2011
If you bought one of those high-end bikes from your local bike shop and it didn't come with a kickstand installed, I've got some good news. There's an affordable solution available. I bought this particular Greenfield kickstand to fit the new Fuji bike that I bought for my wife. For all of the high quality hardware Fuji put on this bike, you'd think that they could have installed a $7.00 kickstand, or at least installed a mounting plate for a kickstand. They didn't, so I did a lot of research to find out who made a kickstand that would fit a Fuji (Sunfire model) bike. The only advise I found from the "experts" on all of the cycling web sites was to lay the bike down on its side or lean it up against a tree or something. Hmmmm. Lay it down or lean it up against something. That's a perfect solution for anyone who just spent $500 (or more) on a new bike. Now, why didn't I think of that solution. Neither of those two options made any sense to me or to anyone else I talked with. Then I discovered the Greenfield line of kickstands and saw this model KS2SB 285mm black kickstand with a retro mount kit pictured on the Internet. This was a bottom-mounted kickstand that was designed to fit bikes (like my Fuji) that didn't have an existing mounting plate for installing a kickstand. So I decided to take a chance and buy one. None of my local bike shops had that kickstand model in stock and it would take a week for them to get one. Then I checked Amazon.com and saw that Niagara Cycle Works had it in stock for $7.49 + shipping, so I ordered it along with the rubber foot for an additional 89 cents. The order was placed on 4/04 and I received the kickstand and foot the next day. It took all of maybe five minutes and a metric Allen wrench to install the kickstand on the Fuji. Quick and painless installation. It fits and functions perfectly. Not only does the kickstand work great, the black color blends in perfectly with the dark color of the bike. My Fuji Sunfire has a 17" frame and the standard 285mm kickstand looks to be the perfect length for this bike frame, although you can shorten the kickstand leg by cutting some it off if necessary. No problems with the kickstand or with the Niagara Cycle Works order.