Shopping Cart

Your cart is empty.

Your cart is empty.

Grip Puppy

Free shipping on orders over $29.99

$19.99

$ 9 .99 $9.99

In Stock

About this item

  • Superior Comfort: Made from high-quality, soft foam material to significantly reduce vibration and hand fatigue, ensuring a more comfortable ride.
  • Durable Construction: Designed to withstand harsh weather conditions and heavy use, providing long-lasting performance and reliability.
  • Enhanced Grip: Features an anti-slip, textured surface that offers exceptional grip and control, enhancing your riding safety.
  • Universal Fit: Compatible with most motorcycle, bike, and scooter handlebars, making these overgrips a versatile choice for all riders.
  • Easy Installation: Simple to install with no special tools required; just slip them on, trim to fit, and enjoy improved comfort and grip instantly.



Product Description

Grip Puppies Installed

Grip Puppy BIG PAWS are the fastest, easiest, least expensive way to make your motorcycle more comfortable and your ride more enjoyable. They are 'over grips' that are specially designed to be installed over top of your existing handlebar grips. Each Grip Puppy is constructed of a unique, precision engineered foam that is both soft & squeezable for comfort, and durable and UV resistant for years of use. They are built for use in the sun and in the rain and will not retain water or get slippery (on the bars or on your hands) when wet.

  • Designed to reduce vibrations and make holding handlebars more comfortable.
  • Each Grip is hand finished to provide enhanced grip/texture.
  • The ends of the grips are hand radiused for a neat, comfortable rounded finish, and to wear better over time.
  • They work well with heated grips.
  • Rock solid when installed, a simple and very effective solution

These larger Original Grip Puppies install over most motorcycles with larger diameter handlebars installed on Harley Davidson, Indian, and other heavy cruisers. They install over 1" handlebar grips with a diameter between 1.45" (3.68cm) and 1.65" (4.19cm).

Grip Puppy Big Paw Features
Grip Puppy Big Paw Size

Luiz Roberto C. Chaves
Reviewed in Brazil on January 13, 2025
Produtos de boa qualidade e preço
Lori A Pantuso
Reviewed in the United States on January 10, 2025
To clear any pre- buy questions about Big Paw Grip Puppy. Installed on 2019 Harley Davidson Limited. Limited has factory heated hand grips. Did not have to cut or trim. Fit perfectly. Used small amount of diluted dish soap, warmed grips on bike and grip puppy's with hair dryer. A little effort but went on without too much effort.I have regular hand size, palm width 9in. Reg- large. Thickness of controls comfortable. I always ride with finger less leather riding gloves, or full cover gloves when cooler riding. Heated grips work as designed. Will keep factory rubber grips from wearing out.Great product.
stephen moores
Reviewed in Canada on September 11, 2024
These are awesome. A bit of soap and they were on in a minute. These are thick. Comfortable and are going to last. I absolutely recommend them
Robert Hohmeier
Reviewed in the United States on July 31, 2024
On my second set in two years. First set tore after one, well inside 2 year warranty window. Wrote the company and asked them to honor warranty, but no reply. But liked them enough on my Royal Star Venture to get a 2nd pair of "name brand" ones. Knock-offs are half the price, but experience often shows "you get what you pay for". $20 bucks was not a bad price. The RSV grips are plain, and narrow, too. These Grip Puppy's do expand them another 1/8 inch or so, and are easier on the hand. I'm not a big guy with big hands, but these are about perfect.
Duff
Reviewed in the United States on June 12, 2024
You can easily cut to size--a little work to get them on, but very comfortable.
Customer
Reviewed in the United Kingdom on March 12, 2024
With the grips wearing a little on my bike, but not really ready for replacement I took a shot at these. Having previously had them on a previous bike a few years ago.I got these larger diameter variations and have used them a few weeks now. Fitting was easy, after trimming them to size, they went on easily using dish soap. They fit great and are really comfortable and I'm pleased with them. They seem expensive for what they are, however they work well, comfortable and look tidy. That said, a pair of basic Harley OEM grips aren't far off 7 or 8 times the price of these, so can't really fault them.Excellent product.
James H.
Reviewed in the United States on February 12, 2024
These grips are a perfect fit for my Honda Goldwing. They were easy to put on too; took me about 10minutes from start to finish. I let them soak in soapy water for about 5 minutes, I applied a little dishwashing soap on the handlebar grips, and I slid them on (no tools needed). It was that easy. They are an exact fit in length and width. The original Goldwing grips are just a bit too small for my hands and after riding for a few hours my hands begin to cramp. These Grip Puppies add girth to the grips, are soft, absorb the vibrations, and allows the heat on the grips to come through. PERFECT.
Joel
Reviewed in the United States on November 22, 2024
Great product, easy to install and really eliminates vibration... highly recommend!
Eric Erickson
Reviewed in the United States on April 1, 2024
I was prepping for the Daytona Rally run last month and ordered these. The premise was that the extra cushioning would cut down numbness and such in the rider's hands. I broke my wrist when I was younger and my right throttle hand goes numb pretty quickly unfortunately. ANYTHING I can do to delay or prevent that is a plus.First trick was getting them on though. Read MANY "Here's how I did it" things. Did the hot water, tried the dish soap. What a pain in the "you know where." DO THE AIR COMPRESSOR METHOD. I fought and fought before I broke out the compressor thinking that it couldn't be that hard. It was.Pinched the end of the grip around the tip of the air gun, gave a little blast and it was about halfway on in a split second. Had to fidget with it a bit keeping the air blast in there enough to balloon it up to move on further. Still took some effort and fidgeting, but yeah, that was the absolute best way. It is tougher as you get it nearly on as it's almost impossible to pinch the end around the air gun nozzle. It will eventually get there though. Might have tried a longer needle tip to get further inside the nozzle. Don't HAVE one, but I bet that might be the trick.Did it work AFTER I got it on? Yes. My right hand often goes numb in just a few minutes without flexing it around. I have a feeling that the extra circumference on the grip as well as the cushioning was a huge improvement for me. Was able to ride pretty happily for much longer without having to shake out that hand. They're staying on!As well, as in the pics, I was able to add the throttle control back over the top of the grip. ALSO took a little fidgeting, but it's on, works great. SUPER HAPPY with my setup now.
Abel Delgado Montañez
Reviewed in Mexico on May 13, 2023
buen producto
Nes
Reviewed in Italy on November 18, 2023
Ok
Caleb Norris
Reviewed in the United States on June 27, 2022
Was looking for a solution to prolonged vibration at high rpms on the interstate, and though these appear to be simple solution they are very effective as well. Have had them on my bike for two long trips both close to or a little over 1000 miles each and these performed beautifully. No numbness, no slippage or affect on performance. The only struggle was getting them on. I opted not to cut them since they could extend the length of my stock grips (2018 Honda shadow Aero 750). it would be nice if they included instructions on the methods you could use to install them however youtube provides many possibilities from compressed air, to soapy water. The Foam is very durable. I was concerned about ripping it while trying to get it on but as long as you don't use any pointed objects, it can handle the pulling and tugging to get it over the grips. I used zip ties along the length as separators in-between the foam and the grip as I installed. You can cut these grips down to smaller size if you need to, but I would take my time so you have an even clean edge. If you have a need to remove them , it's very easy to just roll them back off the end of the grip, no damage done to the puppies or your grip. My cramp buster also fits over the foam grip no problem. Great product and does the job.
Stuart Alexander Vorster
Reviewed in the United States on February 16, 2021
Absolutely outstanding product. Ridiculously easy to install. Has completely eliminated numbness in my hands on both a Triumph Black Bobber & a Suzuki Burgman. Will Order again for Harley Night Train, a Vespa & a Giant MTB 😄 They ARE that Good! Use the bubbles from some water & dish soap & be relatively gentle even though these are pretty tough, wind them on gradually, don't cut them, there is zero need to, they squoosh into the size you need, basically you just mould them to fit any length space! They will make your grips larger! I don't ride with a death grip on the bars so i rest my hands on these mostly with two fingers on the brakes, clutch, whatever. The fact that your hands will never slide a millimetre makes up for any increase in diameter. Buy them, they work very, very well!
Recommended Products