Your cart is empty.
Your cart is empty. Fitment:
For Harley Dyna 2006-2017
For Harley Dyna Low Rider FXDL 2017
For Harley Dyna Low Rider FXDL 2016
For Harley Dyna Low Rider FXDL 2015
For Harley Dyna Fat Bob FXDF 2014
For Harley Dyna Low Rider FXDL 2014
For Harley Dyna Street Bob FXDB 2014
For Harley Dyna Wide Glide FXDWG 2014
For Harley Dyna Fat Bob FXDF 2013
For Harley Dyna Street Bob FXDB 2013
For Harley Dyna Super Glide Custom Anniversary FXDC 2013
For Harley Dyna Wide Glide FXDWG 2013
For Harley DynaFat Bob FXDF 2012
For Harley Dyna Street Bob FXDB 2012
For Harley Dyna Wide Glide FXDWG 2012
For Harley Dyna Fat Bob FXDF 2011
For Harley Dyna Street Bob FXDB 2011
For Harley Dyna Super Glide Custom FXDC 2011
For Harley Dyna Wide Glide FXDWG 2011
For Harley Dyna Fat Bob FXDF 2010
For Harley Dyna Street Bob FXDB 2010
For Harley Dyna Super Glide FXD 2010
For Harley Dyna Wide Glide FXDWG 2010
For Harley Dyna Fat Bob FXDF 2009
For Harley Dyna Low Rider FXDL 2009
For Harley Dyna Street Bob FXDB 2009
For Harley Dyna Fat Bob FXDF 2008
For Harley Dyna Low Rider Anniversary FXDL 2008
For Harley Dyna Street Bob FXDB 2008
For Harley Dyna Super Glide Custom FXDC 2008
For Harley Dyna Wide Glide 105th Anniversary FXDWG 2008
For Harley Dyna Low Rider FXDL 2007
For Harley Dyna Street Bob FXDB 2007
For Harley Dyna Super Glide FXD 2007
For Harley Dyna Wide Glide FXDWG 2007
For Harley Dyna Low Rider EFI FXDLI 2006
For Harley Dyna Street Bob EFI FXDBI 2006
For Harley Dyna Super Glide 35th Anniversary FXD 2006
For Harley Dyna Super Glide Custom EFI FXDCI 2006
For Harley Dyna Super Glide EFI FXDI 2006
For Harley Dyna Wide Glide EFI FXDWGI 2006
howard teal
Reviewed in the United States on August 29, 2024
Brake rod wrong thread and the shift lever bushing has to much play
Customer
Reviewed in the United States on May 1, 2024
Fit perfect and very affordable. I had tough time finding forward controls for my bike. This turned out better then I imagined.
Customer
Reviewed in Canada on March 9, 2024
Had to modify the brake rod to make it work on my Street bob. Thread pitch is not the same. After messages back and forth with the seller, he did compensate me for the modifications I had to do. Overall quality is not the best, could be better, had to make my own bushings for the shifter shaft lever inside the mount cause it was super sloppy, but it still works and does its job
Eriksikk
Reviewed in the United States on December 13, 2024
It's semi-finished...1. The nut and bolt sizes are metric, not imperial as described in the included manual.2. The nut and bolt sizes are different than described, but they fit the design.3. The brake pedal shaft does not fit the brake pedal, as the hole size is slightly off. A tight hole is not always good ;)4. The brake pedal pushrod arm is not perpendicular to the brake pedal axis. This may be normal, we will see during installation. If it is not normal, it cannot be fixed without special equipment (by hand), it needs to be pressed or cut/welded -> painted.5. The quality of the short lever hinges is 2/5 max. I think it will break after a week of use. The threads of the hinges are a little rusty. I think I will have to replace it with another lever of better quality in the near future.In any case, it can only be installed on the bike after additional modifications(reworking the threads, hole for the brake pedal, etc.)Overall quality - 2/5Paint quality 4/5Thread quality 2/5If I had known about such quality, I would not have ordered the whole kit for this money, I would have ordered some parts separately and made the rest myself.The next day I try to install the front controls.Changed the overall rating from 3 to 2.The brake lever does not fit, the thread is different, it is impossible to install on the brake cylinder.The gear lever is worse than at first glance.Both levers need to be remade.Also for the Dyna models, it should be noted that the controls are designed for a person not shorter than 180. If shorter (for example, 175), the Dyna design does not allow comfortable placement of the feet due to the air filter and the horn.You need to use a conversion kit or make your own, since the levers still need to be remade
Billie Jean Miller
Reviewed in the United States on September 6, 2023
The product was PHENOMENAL! The brake rod was an exact match to the factory original and all the parts bolted together perfectly!! I HIGHLY RECOMMEND THIS to anyone wanting to replace or move from Mid Controls to Forward Controls. The kit came with detailed instructions and all the gaskets for the primary housing.
Jim
Reviewed in the United States on April 8, 2023
FAIR WARNING!!! THE THREADS ARE ALL WRONG FOR THE REAR MASTER CYLINDER ON HARLEYS!!! GOT MY BIKE TAKEN APART AN NOW CAN'T GET IT BACK TOGETHER!
Scott
Reviewed in the United States on September 30, 2022
Will fit on a 05 Dyna lowrider works good been 2 days installed and having no problems it comes with everything you need except foot pegs.
Amanda
Reviewed in Canada on September 27, 2022
The product looks fine and was in excellent foam packaging but the shipping by Amazon took extremely long, like got it today (Sept 26th) but ordered it (Aug 10)
G. Ashley
Reviewed in the United States on August 10, 2022
Ordered this kit and when arrived it was missing parts right out of the box. The threading for all the hardware is different then the OEM Harley so you have to use all the supplied hard ware. The threads on the brake linkage rod itself are extremely poor quality and the thread pitch is also not the same as Harley so it will not screw into the master cylinder push rod. So save yourself the hassle and order from Harley direct or try to resource used ones.
Daniel Morneault
Reviewed in Canada on July 5, 2021
Harley
Recommended Products
$95.77
$ 38 .99 $38.99