Para Toyota Prius 2010 funciona genial, marca la temperatura de agua.

I had hopes for this one and picked it up to be able to gauge my fuel economy on an older 2005 Nissan Pathfinder. Upon plugging it in, it caused all my gauges to go out of wack and lit a service light that wasn't there before and two more warning lights: disabling my Vehicle Dynamic Control (VDC) and activating a slip light. This is a traction control system, I believe, and maybe it's just a warning light but the system nevertheless claimed it was disabled. All this from plugging this device in. It's easy to plug in and get working but, if I'm being honest, it's not practical. It takes nearly 1-2 minutes for it to actually read the computer and activate making it a nuisance really. Sending this one back as it failed to deliver. Maybe it's good for limited use but definitely not on a day-to-day, and not for my application.

Happy with the purchase-Works great.

2012 Chevy Cruze -Unit does not automatically come on after starting the car. You can unplug and re-plug in the USB cord at the back of the unit and it will come on ,but then says can't connect and shuts off. When you first power up the unit, it scans through multiple ODB protocols and supposedly will be able to sense and pick the correct protocol for your car, but it doesn't work. I bought one of these last year and it had the same problem and they sent me a circuit board to replace and worked. I figured they would have had these fixed by now.

Mit diesem Produkt konnte ich das Problem mit den schlecht ablesbaren Instrumenten in unsern Citroen Jumper Kastenwagen lösen. Einfach anschließen, Einheiten einstellen, läuft.

So I bought this guy for my 08 subaru wrx sti. It functions well enough tho the beeping when it turns on and off can be a bit annoying. As with many of these obd monitors the trouble for me comes with what it can display at one time. Ultimately I was just using this to monitor coolant temp and everything else on screen was on my normal dashboard and seemed silly. I ended up with a scangauge that at least could show multiple gauges of my choice on the same screen. If your dash doesn't work it's an option but otherwise there are better obd monitors on the market.

The product easily connects to your OBD two port under your dash. It has lasted for over a year with no problems. My Scion does not have a water temperature gauge and I needed one for the hot Arizona weather I am in. You can mount it wherever you want because it has a 3-4 foot cord and I can easily see the numbers while I am driving. It also can cycle through other functions like a tachometer, a voltmeter, and other functions. But I primarily got it for the water temperature gauge. Well worth the money.

2021年型アクアに取付けしました。以前の車から10年程使っているデジタルモニターの表示が点滅し出したので、寿命と思い代わりの物としてこれを見つけました。すべての機能を試せないほど多機能で表示も見やすく、価格もリーズナブルであると思います。設定などはかなり修正する必要があるので、主な設定の修正点を参考までに記載させていただきます。①表示単位(アメリカ向けになっている) UNITを 「imperial」から「metric」に変更。②エンジン車では必要ありませんが、HV車ではエンジンが停止するとすぐスリープ状態になるので、スリープ時間を２０分に変更。(但し、電源はOBDからではなく、ACCから取るように改造しないとバッテリ上がりの心配があります。)③スピード表示が車載メータとずれている場合、パラメーターを変更。④水温などの表示画面で下の棒グラフは初期設定で「燃料消費量」になっているので、エンジンの回転数を表示したい場合は変更。⑤付属の両面テープでは固定しにくいので、粘着シートなどを使う。★４つにしたのは日本語の取説が無いためです。英語の得意な方は問題ないかと思いますが、普通は英語の取説を読み解くのに苦労します。

Not too "sheer" - a category Amazon keeps asking me to rate things on, lol. Super easy to use, plug and play, multiple displays, screens and combinations of parameters. I have Coolant Temp as Primary (reason I bought this to see temp much more granular) plus Voltage, and RPMs. I can switch through multiple displays, get DSC codes, reset codes and Check Engine Light, all on the fly. Comes with OBD2 to USB extension cable. Note: directions are terrible, but anyone who can turn a dial, push a button, read and extrapolate what words and numbers mean can do a LOT with this little gem. Use Google, think, and get a gauge that gives you live performance data. What could be better, and all at a very reasonable price. Gauge is configurable for multiple protocols. If you can't operate this, you probably shouldn't be playing with the OBD2 port to begin with. I am personally thrilled, I just wish the enclosure was slimmer to be able to have more mounting options.

The Autool x50 PLUS works perfectly with my 2008 Honda Pilot (OBD Type ISO 9141-2).It was delivered fast and looks great and is very simple to hook up, just one connection. The display has an auto turn on, it turns on when you start the car and an auto shutoff, shutoff time is adjustable up to 20 minutes after the car is turned off. The display is easy to see, day and night. The brightness level, is controlled by a light sensor and it is not manually adjustable. I have mine is setting in front of my instrument panel and the display brightness is just fine day or night. After installing the Autool x50 PLUS, I had some question, So, I emailed the seller “OBDIIShop” and they replied as quickly as hour later a couple of times, BUT, never longer than 24 hours, they appear to be closed on the weekends. The reply emails were very helpful in answering all my questions. Their customer service is great!The Autool x50 PLUS has Lots of customization options. The X50 PLUS has four area’s/positions on the main display. The Position 1 (Largest read out) can display MPH / Km/H speeds, coolant temperature in F or C, Fuel in MPG or LPH and many other read outs are available by just by toggling the switch below the display to the left or right. Position 2 and 3 (Smaller readouts in center left and right of display) can be configured to show multiple different measurements (Position 2 and 3 only display metric units NOT US/imperial units), I did not find this an issue because, I have mine set for Voltage and Engine RPM, Position 4 only can configure instantaneous fuel consumption or engine rotation progress bar display.I used mine mainly for Speed with the Speed Alarm on the Position 1 and MPG, (to prevent a heavy foot during acceleration) on the progress bar display. Both the large/primary and the progress bar display can easily be seen with a quick glance. The MPH speed alarm setting can be set in the Menu “Settings” under OverSpeedSet”. The easiest way to set it, is to convert the MPH you want the alarm sound at (use the internet for conversion), to Km/H and enter that speed into the ”OverSpeedSet”. The nicest thing about the speed alarm is the speed readout changes from white to red when you go over the speed alarm limit. If you don’t want the alarm to turn on just set it to 160 that is 99.41MPH, or use a higher number if you drive fastest than this.AVG and Current MPG are accurate, BUT you will need to go into the setting menu and make sure your “Engine Size” is correct and the “KPH” is set show your correct vehicle speed in MPH or Km/H which ever one you use while driving. After that you need to go through a few gas full ups and manually figure you gas mileage and then adjust the “Fuel Adjust %” in the menu settings, the more you do this, the AVG and Current MPG / Km/H Display will be more accurate. You have to do this even with “SCAN GAUGE”. I also have a SCAN GAUGE, but for information at a quick glance, the Autool X50 PLUS can’t be beat.“OBD Diagnose” lets you read and reset OBD scan codes, also you can read the real time active data that is available to your OBDII port, just go to Menu, “OBD Diagnose”, “DATA Stream”. It is great way to see why your Check Engine light is on.There are a lot of features in the Autool x50 Plus and I haven’t used them all, like the “Driving Test” Menu that check braking time and distance and Speed test.

Trés bon produit permet de connecter sa vitesse exacte, on en a bien besoin avec la répression totalement folle que nous vivons sur nos routes, et pour les autos dites modernes qui en sont dépourvue nous donne aussi la température du liquide de refroidissement et le voltage du débit de l'alternateur .

Only works on some vehicles, even if the OBD2 protocol is within its parameters. When it did work, it was very cool and easy to use.Dodge Neon: didn't workNissan Altima: workedHonda S2000: didn't work