Your cart is empty.
Your cart is empty.3 Features 3.1 Compatible with sensorless brushless motors. 3.2 Top quality components, high current endurance. 3.3 Excellent start-up, acceleration and linearity features. 3.4 Plenty of programmable items. Suitable for various chassis, tires and race tracks. 3.5 Multiple protection features: Low voltage cut-off protection / Over-heating protection / Throttle signal loss protection. 3.6 Internal timing can be changed easily to make the ESC suitable for various motors. 3.7 Easily programmed with the SET button, LED Program Box, Professional LCD Program Box and USB Link Software 3.8 ESC firmware can be updated through the USB adapter in the LCD Program Box. 3.9 Top quality motor: Aluminum shell (case) High quality magnets Copper wires with high temperature endurance High quality bearings
Thrasherht
Reviewed in the United States on March 9, 2024
I bought this for my latrax prerunner, and out of the box it won't fit.The motor plate has 2 holes in it, and the bottom hole needs to be adjusted slightly.I used a Dremel for 30 seconds to oblong the one hole and it fit perfectly after that.This setup is crazy fast compared to the stock motor.
Tyler
Reviewed in Canada on March 25, 2024
The media could not be loaded.
Customer
Reviewed in the United States on April 8, 2024
I installed this in a Losi Mini-T, and it is insanely fast! I will be ordering another one for one of my other builds. It cogs a little at low speed, but I would expect that from such a high KV motor.
Matthew
Reviewed in the United States on April 5, 2024
Ok I will say I couldn't get the programming card to work, but was able to change the settings with the set button / beeping method - I particularly didn't like the factory drag brake setting. Dropped into a Losi Mini T 2.0 (had to add standalone receiver.) Car rips on the stock gearing. Don't have the factory brushless version to compare it to, but I can't imagine it's this fast. Normal around the house driving and the motor stays fairly cool, will try in a track setting.Stickers, mounting tape, a couple of zip ties are also included. Very complete.Did have to cut off the included mini-Tamiya style battery plug and solder on my preferred Deans.
CHRISTOPHER SAGE
Reviewed in Canada on July 23, 2023
This is an easy set up for my JRXT Mini and provides plenty of power. I did not even use the card to set it up. Now this was an open box version so I saved $20 bucks and have no complaints. Runs smooth and easy on the battery as well. I am running it on a small homemade dirt track so I have done no speed runs, but the tires will balloon under power.
Duane
Reviewed in Canada on February 5, 2023
Makes the battery heat up. Even just plugged in. I don't think it's a real hobbywing product
Brian Allen
Reviewed in the United States on September 4, 2022
This was the second kit I bought for my 1/18 Dromida R/C truck, the first was cheaper but didn’t work as described. This one bolted right it and flat out works great. The programming card was a huge bonus and got it fine tuned easily. Super happy.
Dustin
Reviewed in the United States on December 5, 2022
Yes, this motor is half the size of the stock one in the Mini T/B. Regardless, it will do a backflip when you accelerate if you don't ease into the throttle, and will easily do 30+ mph with the stock gearing. It's VIOLENTLY fast. You will need to use the included program card to change some settings to tweak response and acceleration. I set up my radio to max out at 25% throttle so my kid could drive it and it's still way faster than the stock motor.
christina h.
Reviewed in the United States on November 28, 2022
This is very fast and good bang for the dollar. Moving from a brushed ESC/MOTOR to brushless combo. I have used Ezrun before and they have always worked well. You can make adjustments to the punch level, and a lot of other settings as well using the tuning card it comes with. Shipping and Handling from Amazon was as expected with no issues.
Paul R
Reviewed in the United States on August 21, 2020
I bought this as an upgrade for my Losi Mini-T 2.0, thinking it was a similar, larger, motor I've seen used. It could possibly mount but is too small in any case. I'd say this could be appropriate for some 1/18 scale but not 1/16 for sure. So I have it but can't use it and the seller does not accept returns. The dimensions aren't listed anywhere and I thought this was a similarly EZRUN motor I've seen used in the Mini-T.I measure the case as 30mmL X 19mmD.Otherwise it looks like a great motor, esc, and programming card.
skullboi2012
Reviewed in the United States on November 25, 2020
this motor and esc is great put it in my losi mini t 2.0 no problems
Recommended Products
$25.99
$ 11 .99 $11.99
$160.79
$ 79 .99 $79.99
$122.54
$ 57 .99 $57.99