Your cart is empty.
Your cart is empty.From the manufacturer
About Us
Welcome to Hogue, home to a proud family tradition of American quality and innovation since 1968. Every Hogue product is built in the spirit of fine craftsmanship, attention to detail and complete dedication to the legacy of founder Guy Hogue. This methodology has carried into the next generation by Guy's sons Aaron and Patrick, by Hogue Tool & Machine Company president Jim Bruhns, by his grandson Neil, and by every employee at Hogue.
Fit, function, superior performance and design are hallmarks of the Hogue name. When you purchase a Hogue product you’re carrying a piece of our family history. Our products are designed from the ground up to enhance your sporting experience. Our brightest ideas, the finest materials and the manufacturing practices are united under the Hogue name.
Veronica Martinez
Reviewed in the United States on February 24, 2025
I love the way this feels on my Glock 42. It’s great quality. The material wasn’t thin or flimsy. The finger grooves are perfect! Easy slid on to my pistol.
Dillon
Reviewed in the United States on September 23, 2024
Great grip was decently hard to install though but use something for leverage and you’ll be fine
マヨバナナ
Reviewed in Japan on June 14, 2024
hogueです。誰がなんと言おうとhogueでした。グリップに装着するときのキツさや、装着後のフィット感。ラバーの質感、デザインのセンスの良さ。文句のつけようはありません。ショボいハンドガンもよく見えます。しかもなんかこれ安いし。
及川 義人
Reviewed in Japan on June 10, 2024
ワンランク上がったスタイルフォルムになり大変満足してます。手に馴染む質感また、実銃にも採用されているボーグ製のグリップ購入し満足
Mark G.
Reviewed in the United States on December 31, 2024
Fit me Glock 43 perfectly. Used a hair dryer to make it flexible and easier to install.
A MN Guy
Reviewed in the United States on November 5, 2024
If you own a PPK or PPK/S you know they are very unpleasant to shoot due to the blowback action and the sharp edges in the design. This grip alleviates most of that. The beavertail portion fits in the web of my shooting hand and takes a lot of the shock out of the recoil.These can be difficult to install....I warmed it up in boiling water and used a little windex on the grip. Its difficult but not impossible and once installed its not going anywhere.
The Big Guy of Michigan
Reviewed in the United States on November 19, 2024
Much better grip on a small gun handle. Tough to get on, but worth it. Soak in hot water & spray windex on gun grip to install. No interference with holsters.
カスタマー
Reviewed in Japan on May 12, 2023
はめるのに少し苦労しますが焦らず少しづつすれば大丈夫でした。裂けてしまう恐怖心なく出来ました。しっかりフィットしていい感じです。
わさびいぬ
Reviewed in Japan on March 6, 2023
ウマレックスのG42に取り付けました。このタイプは取り付けに力が必要ですが、取り付けた後は全くズレも無く、しっかりとグリッピング出来るようになります。安定して握れるようになるのは良いですね。おすすめです！
Jerry M
Reviewed in the United States on December 25, 2023
It fits as it should. Is it a little difficult to install, yes it is. I chose not to use any lube because I don't want anything wet on my gun, at least not on purpose. I got it on without to much of a problem. I did not use any shims for the install as they suggest. It fits perfect and makes the grip feel better, it is a small gun so without it it felt rather slim. But now it feels great. If you are on the fence about one I can only tell you that I like mine.
Nichole
Reviewed in the United States on June 11, 2019
I got this because. My palms tend to sweat when I go to the range and I have a problem with the 43 slipping and really wanted a grip. I choose this for the price and reviews. So it really is no joke that this grip is a pain to put on. I put it in boiling water for a couple of minutes and then used window cleaner like the directions suggested and a butter knife to help give me leverage to ease it on. After working with it and pushing one side a little at a time I got it on after 10 minutes. I do love the feel and how better it fits in my hand. I will have to update when I get a chance to take it to the range. I like the finger grove area. My personal favorite is a gun that has the finger grooves and not just a straight front end on the grip. This grip definitely gives me that. Great price and quality, would definitely buy again!
John V.
Reviewed in the United States on September 23, 2018
I own my G43 for a couple of years now and the problem is that this pistol is too small for my hands. As a result, I can be accurate with the first shot, but I have to readjust my grip for the second shot. So, I have this pistol which is made for carry purposes but I am not confident it will be effective in case I ever need to unholster it and that is not the feeling you want for an EDC pistol. I have the large backstrap on my G17 and that works very well for me (I even won some competitions with it) but it is a bit large to carry so recently I have been thinking of buying a G19 which I would be much more confident with and it is a pistol that many carry. Just in case I can save the money, I decided to get this grip sleeve as a last effort to make the G43 work for me and while I cannot call it "perfect", it helped a lot by adding a bit of thickness to the grip and I love the fingers separation because when I grip the pistol, my fingers go to the right place and feels like a more secure grip right away.So I took the pistol to the range and I immediately saw an improvement with the follow up shots. It is not perfect as the pistol is still too small and I have to curle my index finger too much to depress the trigger but the grip sleeve helped a lot. I wish it was a bit beefier on the backstrap but I will take what I can. So for now, I am keeping my money on the G19 idea.Now, installing it was a bit of a task at first because I thought "how hard can it be to stretch it around the pistol grip" but then I tried and I found out that it is not only hard but it is probably impossible. I read some reviews where people used hot water to soften it and even as a "lubricant" to have it slip on but the only time I am willing to get water on my pistol is if it is raining and I absolutely have to unholster it so I was not going to do that. Then I remembered my car trim removal tools and that worked like a charm. You can see the tool in the picture and it is a cheap tool you can pick up at any parts store or even here at Amazon (this one would do: ) so I put the sleeve as far in on the backstrap as I could then inserted the trim tool on the side and worked it around the front side of the grip (all the way to the other side of the pistol). I did this move 3 or 4 times and the grip sleeve was installed. Then I used my thumb to move it back down so it is flash with the magazine opening and it was installed dry and very tight.If you own a G43, this grip sleeve is highly recommended. Especially if you lave large hands for that pistol.
Recommended Products