Your cart is empty.
Your cart is empty.Product Description
Smart makes life better
- Note : Wireless refers to the wireless connection between the camera and the NVR. The camera (without battery) and the NVR need to be connected to a power source to work
- Model: N029
- The WiFi IP camera has been paired with the NVR system at the production site. You only need to supply power to the NVR and IP cameras through the corresponding power adapter provided, and then use the system
- The NVR system has two output ports VGA and HDMI. You can choose to use VGA or HDMI according to the interface type of your monitor to be connected to the NVR
- Support boot wizard, guide users to set up NVR network and add IPC function, support one-key Internet access function
- It supports multiple protocols such as ONVIF protocol, N1 and some private protocols when adding more IP cameras. It will make sure that you can search for IP camera across network segments
- Using H.265+ encoding to save more storage space than H.264. The storage space can be expanded up to 6TB max
- Withstand an operating temperature of -4°F to 122°F (-20°C to 50°C), and work normally even in extreme weather such as snowstorms
- The IP camera has a built-in microphone, so the NVR system can record the sound of the shooting scene. After downloading and installing the Esee Cloud APP, you can play the recorded sound of the scene on your phone. In addition, if you have a headphone or speaker, you can connect it to the audio hole at the back of the NVR box to listen to the recorded sound
Tips:
- Due to different light, the product color and the picture may have parallax. Subject to the actual product received
- This NVR system does not contain a monitor. If you want to play the recorded videos on monitor, you need to buy a monitor.Don’t install the NVR box in humid and dusty environment
- Please read the manual carefully before use and check the power supply to avoid damage to the product due to voltage mismatch，NVR uses 12V/2A power adapter. If you use the 12V/1A power adapter of the camera, the hard disk cannot be detected
- Wireless only means that the signal transmission is achieved through wireless technology, however, you still need to supply power to both NVR and cameras via wire
Enjoy 24/7 monitoring service
- Right-click to enter Video Backup, you can select the video you need to backup. The backup video will be AVI format which can play by VLC media player. PS: USB flash disk need be FAT32 format.
- Support multiple alarm modes such as motion detection, video loss, video occlusion, etc., support buzzer, E-mail notification, mobile App push alarm
Remote View
- To remote access via your phone or tablet, you need to download and install the Esee Cloud APP first, connect the NVR to the router, and view the record via WiFi connection
- Remotely view the real-time recording of the device anytime, anywhere. Playback is very convenient
Night Vision
- Clear images can be obtained even at night or in dark areas
- Night vision ranges up to 65 feet
- Display color mode during the day
- Night vision display in black and white mode
Plug and play
- The WiFi network camera has been paired with the NVR system at the production site, insert on the power, connect the display to the NVR ，The device can work normally
- Connect to the router wirelessly: Right-click> System Settings> Network Settings, and then click "Wireless Internet Access" in the lower left corner. Then the system will search for available WiFI signals. After entering the WiFi signal password, the NVR system will connect to the wireless router ， you can view it remotely
Signal transmission distance
- In an open place, the transmission distance between the NVR and the camera can reach 300 feet
- The transmission of wireless signals will be affected by obstacles, and the transmission distance will be shortened accordingly. In order to transmit wireless signals more effectively, please install the camera in a location with fewer obstacles between the NVR and the camera. Or connect the camera through the camera to connect the camera to the NVR
Easy to install
- Using the 2-axis adjustable bracket, the camera can be easily installed in the wall and ceiling. Just drill a hole in the wall and ceiling, then to fix the camera by Screws provided. The angle of camera can be adjusted by Allen key provided
- The surface of the camera is covered with high-quality metal materials that can effectively prevent rust, so it can be installed in almost any outdoor or indoor place
NVR Security System packing list
- 1×8CH Wireless Network Video Recorder (NVR)
- 4×1080P HD Wireless IP Cameras
- 5×Power Adapters (1×12V/2A Power Adapter for NVR and 4×12V/1A Power Adapters for Camera）
- 1×USB Mouse
- 1×Remote Control
- 4×Screw Packs
- 1×Network Cable (3.28 feet)
- 1×Spare 5dB Antenna
- 1×Quick Start Guide
fleurelien
Reviewed in the United States on September 19, 2024
The Camera not power the led not coming on
Michael Hazard
Reviewed in the United States on June 23, 2024
I have a 2 yr old 4 camera Maysly system and, frankly could get no response from Maysly or seller for technical support. Recently 1 camera failed and I searched for replacement. Jouseau replied and also gave me great support to correct my technical issues including replacing NVR at no cost. I am impressed.
Daniel Gorczynski
Reviewed in the United States on June 10, 2024
These cameras work good they take some patience to set up but they are pretty good cameras for the price and playback is a nice feature.
Tessa Nelson-Antoine
Reviewed in the United States on May 25, 2023
I bought the add on camera after i bought the add on camera and they never work. They are not connecting to the system at all. The other cameras are working however the 2 add on cameras are not. Sometimes the cameras don't work for hours. Might have to buy a different set of cameras. The drive went bad and now the system is not coming on at all. Worst cameras I ever bought.
Recommended Products