Your cart is empty.
Your cart is empty.Product Description
High Quality & Service
Hromee has professional engineering team that design and collocate with various of automotive tools including tire repair kit, plugs, air hose etc. We also own a factory over 10 years. All products are produced and sent from factory to warehouse directly.
AC Refrigerant Hose
The refrigerant charging hose is a necessary tools for adding refrigerant into air conditioning system during installation and maintenance. Also, it is suitable for many kinds of refrigerant. Whether it is a automotive air conditioner or a room air conditioner, the refrigerant charging hose can work with a good performance.
- Color: Yellow
- Length: 1.5m / 60 Inch
- Material: Brass, Rubber
- Burst Pressure: 4000 PSI
- Working Pressure: 800 PSI
- Connector Thread Size: 1/4 SAE
Rubber Material
The special rubber compound is extremely durable due to its high pressure resistance and low embrittlement. The lifetime of PTFE-gasket compared to ordinary rubber is at least 10 times longer.
Eric Adams
Reviewed in the United States on February 26, 2025
hose leaked right out of package. not all of them leaked that i bought but you might get a bad one every once and a while
Nathan
Reviewed in the United States on February 22, 2025
6 months you will be buying another.
Danny G
Reviewed in the United States on July 2, 2024
This doesn't fit on a standard AC vacuum gauge. The fittings are too small. Amazon strikes again. Incorrect info and wasted time.
Toby Stone
Reviewed in the United States on June 12, 2024
Hose is completely sealed and does not pass pressure or vacuum through the hose, removed valve core depressor and still is completely clogged or kinked somewhere. Cannot even fit a thin wire through the hose more than 5 inches on one side and inch on the other
Niles J.
Reviewed in the United States on May 26, 2024
It had nice fittings and seals n the hose seems to be of good quality. Worth the money for guages.
JP
Reviewed in the United States on March 20, 2024
My current hose was leaking during evacuation, so I got this one to replace it. The fittings are quality, it seals well, and there were no issues pulling a vacuum and holding it without leakage.
James
Reviewed in the United States on February 7, 2024
This is a really well made HVAC charge hose. Nice and flexible, not stiff like some cheaper ones you get. Ends are well machined and crimped. Not too sure about the gaskets; their a little on the hard side so I may replace with some Yellow Jacket ones. Screw onto an 1/4” SAE Flare fitting just fine! I threw it on my vacuum pump and it almost instantly pulled to 500 microns (with the included gaskets so maybe their OK after all). There is a valve core depressor on the angled end, but it needed to be wound out to fully push the valve open. No biggie. Need a new/additional hose, go for this one!
Superhero62
Reviewed in the United States on October 29, 2024
Item arrived on time, and worked as expected.
Recommended Products