Your cart is empty.
Your cart is empty.Don Fisher
Reviewed in the United States on March 14, 2025
I reluctantly bought the Bike Freewheel by Hycline a few days ago, and installed it on my new-to-me Genesis Villotti 8-speed / cog. This FINALLY fixed the weird, skipping-like sound my bike sometimes had during pedaling. Relieved, as I first thought it was a cable or derailleur issue for adjustment, then that it was my bottom bracket, and replaced it, then my chainring and changed it to a narrow / wide, then I blamed my chain (and replaced it). Since I installed my own parts, it was relatively inexpensive, my bike is upgraded, and I did quickly learn a lot about bicycles, and gained experience that I wouldn't otherwise have, or would take several years. I did this by carefully replacing one part at a time, after measuring with a digital caliper, and doing thorough online research at channels like "RJ The Bike Guy", "BikeFarmer" and "Park Tools" - whose tools are expensive, but have excellent free advice. In the end, it was a process of elimination. To avoid getting incompatible parts, you should perhaps know that:1. This freewheel is the inexpensive cog part on the rear wheel - not to be confused with the better CASSETTE cog option higher quality bikes have.2. Count your rear wheel cogs and select the same from the drop-down box (7,8, or 9).
Bike Jim
Reviewed in the United States on January 29, 2025
Fixing storm damaged bikes
Lorenzo Aguirre
Reviewed in the United States on January 18, 2025
First of all this is a great item. I built my ebike and used this cassette for my rear wheel. I ride a lot and use my bike for exercise and commuting. On a good week I can put 70 miles on my bike. With that said as I was riding pretty hard my chain locked up. The cassette looked loose and the chain was in between rings. I rode home with my motor only and inspected and realized it was the center nut that holds all the rings on the cassette. I took the time to clean and degrease all the rings put them back together and and used blue lock tight on the center nut to prevent it again. The bike rides great again no issues. I will go on a long ride tomorrow and will update if the cassette messes up. My advice check that center nut for looseness.
Peter Tomala
Reviewed in Germany on September 12, 2024
Funktioniert super
Steve H
Reviewed in Canada on August 22, 2024
Nice cheap freewheel works as advertised
EVE
Reviewed in the United States on May 23, 2024
This gear was easy to install with the right tool. Just unscrew the old one with the special tool, screw on the new one, plus you need to add some space on your axel bolt to accomodate its extra width. Just need to dissassemble the axel and bearing bolt, slide it over and then re-install. Once on, just adjust your gearing dereailure, and it works great. The big gear cog really works great on those big hills. the little gear cog is a nice touch too.
Ulises Vital
Reviewed in Mexico on December 29, 2024
The media could not be loaded.
Alan R Davis
Reviewed in the United States on December 14, 2024
A quality product you can trust worth making the investment.
Jerome Tornowski
Reviewed in the United States on November 7, 2024
I purchased this as a spare part after breaking the one on my ebike. I used a different gear range when replacing but this one will be kept as a spare. Perfect replacement and fit
'Bama ersatz plumber
Reviewed in the United States on October 7, 2024
This 13-32T 8 speed freewheel replaced a generic OEM freewheel on my Wallke X3 Pro at ~4K miles; I also replaced the OEM KMC Z8.3 chain with a KMC E10 chain. Once the derailleur was properly adjusted, shifting is crisp, smooth, and accurate, and clearly superior to the original freewheel/chain combination; whether the improvement is due to the new freewheel, chain, or derailleur adjustment I can’t state for certain, but after a few hundred miles, I’m very pleased so far. Only time will tell re durability, but if this freewheel lasts ~4K or more, it will be an excellent value. Installation was a breeze—just be certain to clean the hub threads and apply a bit of Park lubricant before installing. The bearings and ratchet mechanism are reasonably quiet; the cogs are prelubricated, but I applied plenty of dry lube to the freewheel and chain anyway. Overall—so far, so good.
Radler
Reviewed in Germany on September 6, 2023
Für E-Bike mit Heckmotor benötigt da das Kabel durch die Achse geführt wird. Montage war sehr einfach mit Montagewerkzeug ( Amazon ) und neuer Kette versteht sich, schon 200 km gefahren keine Beanstandungen.
Manuel
Reviewed in Spain on September 22, 2023
Es muy bueno y silencioso, es un cambio muy rapido
chris
Reviewed in the United States on August 8, 2023
I have bought 2 of these. One is on a bike that I'm building that I pulled out of a trash Heap. And the other ones on my e-bike. On my e-bike while I was riding if I had to put a little pressure onto the chain it would skip and not just sucks if you know what I mean the click clicking noise well anyway I got a flat and while I was putting on a new tire and inner tube I decided to add the new sprocket. What a difference it makes no slipping or clicking just smooth riding I need to take the time to adjust the derailleur to make it perfect but it's good enough right now. This bracket works like a dream smooth and a lot quieter for some reason than my last sprocket. Definitely worth the money and I'll probably be buying another one
Recommended Products