Hydropure Technologies 10,000 Gallon Spa Pre Filter, High Performance, City and Well Water, Removes Iron, Copper, and Other Metals, Made in USA

Wow, the Hydropure Technologies 10,000 Gallon high pressure filter works better than I thought. I’ve been having a lot of staining issues when I pressure wash the house using the hose from the water well. After using this filter I noticed an immediate change in how the house looks during the wash and after drying. No more orange stains that’s for sure. It’s easy to install and I have not noticed any leaks during usage. It also got rid of the egg smell from the well water.

Nice prefilter.This prefilter works like a charm.we use this for our hot tub, and it helps a lot. I love how clean the water looks clean when using this.it was easy to install and have some great instruction on it.Works great so far.

Many of them were very high end. Some locations still had copper pipes underground.The facts:City water has all kinds of things added into it like phosphates, copper deposits from piping, chlorine, fluoride etc.Eventually they accumulate and start to damage the pools. I'm impressed with this product it really cuts back on maintenence and slows it down from deteriorating.I've had to do expensive treatments on my old accounts and the bigger the more the cost is. Super easy installation I highly recommend.

Hydropure Technologies 10,000 Gallon Spa Pre Filter ReviewIf you're searching for an effective pre-filter for your spa, look no further than the Hydropure Technologies 10,000 Gallon Spa Pre Filter. Designed to cater to both city and well water, this filter makes a strong case for its high performance, especially for those looking to improve the quality of their spa water by removing unwanted metals like iron and copper.Quality and ConstructionOne of the standout features of the Hydropure filter is its high-quality construction. Made in the USA, it adheres to rigorous US standards, ensuring that you’re not only getting a reliable product but also supporting local manufacturing. The durability of this filter is evident—it performs effectively while maintaining its integrity over time, which is essential for a product that is expected to handle significant water volumes.PerformancePerformance is where the Hydropure truly shines. The filter is designed to handle up to 10,000 gallons, making it ideal for larger spas or for those who host frequent gatherings. Customers have reported a noticeable improvement in water clarity and quality after using this filter, which is crucial for maintaining a pleasant spa experience. The removal of iron and copper helps in preventing staining on surfaces and reduces the likelihood of unpleasant odors, contributing to a more enjoyable soak.Ease of UseInstallation and usability are also commendable. The Hydropure filter is straightforward to set up, even for those who might not consider themselves particularly handy. Its compact design allows it to fit seamlessly into most existing plumbing systems, and once installed, it requires minimal maintenance, giving spa owners peace of mind.ConclusionOverall, the Hydropure Technologies 10,000 Gallon Spa Pre Filter is a worthwhile investment for anyone serious about maintaining high water quality in their spa. With its high performance, ability to effectively remove metals, and robust construction, this filter goes above and beyond to ensure a pristine spa experience. If you value quality and results, this is definitely a product to consider. Highly recommended!

Well, I can say this pre-filter has exceeded all my expectations! First off, the setup process couldn’t have been easier. The filter comes with a garden hose adapter and a built-in shut-off valve, so all I had to do was attach it to the hose, make sure the water was flowing in the correct direction, and turn it on. It takes literally minutes to get started. No plumbing, no complex setup - just screw it in, and you're good to go. As for the performance, I was seriously impressed. The water in my area is very hard, with high concentrations of metals that not only cause discoloration but also leave stains and residue in the hot tub. I’ve been through a lot of chemical treatments over the years to try to manage this, but with this pre-filter, I no longer need to use as many chemicals. It effectively removes iron, copper, lead, and other metals, along with bad tastes and odors like sulfur. The first time I used it to refill my spa, I immediately noticed the water was clearer and had none of that usual metallic smell. Also, this filter isn’t limited to just one type of water source. It works just as well on city water as it does on well water, making it versatile for different needs. I use it primarily for my hot tub, but I’ve seen others use it for filling swimming pools, and it even works for gardening or watering livestock if you’re concerned about contaminants in your water. Note that this is a disposable filter, so once it’s done filtering up to 10,000 gallons, you just toss it and replace it. There’s no need to clean or maintain the filter itself. The fact that it’s disposable is really convenient, and it takes a lot of the hassle out of spa upkeep. Just make sure to pre-flush the filter before each use, and you’re all set.One small note - the filter is pretty large and heavy, especially when filled with water, so if you're using it for something like filling a portable hot tub or an elevated container, you might want to set up a stand or something to keep it level for the best results. But honestly, that’s a minor inconvenience given how effective this thing is. Since using this filter, I’ve noticed a huge difference not only in the appearance of the water, but also in how much easier it is to maintain the spa. I no longer deal with unsightly stains or scaling, and the water stays clearer for longer. It also helps keep the pH levels stable, which reduces the strain on my spa’s internal filter and plumbing. This means less wear and tear on the equipment, and it probably even extends the life of my hot tub.For anyone dealing with hard water or metals in their water source, I highly recommend this filter. It’s made in the USA with high-quality materials, and I feel like it’s a great investment, especially given the alternative of constantly treating the water with chemicals. Whether you're using it for a hot tub, pool, or even for household purposes, this filter is a simple, reliable solution for improving water quality. At this price point, I’m really happy with the value I’m getting. For anyone hesitant about the initial cost, trust me—it’s well worth it for the results. I’m definitely going to continue using the Hydropure Technologies Pre Filter and would recommend it to anyone looking to keep their water as clean and pure as possible.Bottom line:This Hydropure Technologies 10,000 Gallon Spa Pre Filter is a must-have for anyone dealing with hard water or metal contaminants like iron, copper, and lead. It's easy to install, works with both city and well water, and drastically improves water quality by removing harmful metals and bad odors. The filter is disposable, requires minimal maintenance, and helps protect your spa or pool from stains and scaling. While a bit large, it's incredibly effective, making it well worth the investment for clear, clean water in your hot tub or pool. 5-stars product in my book hands down! Highly recommended!Pros:1. Effective - removes metals and odors from water.2. Easy to install - quick setup with a garden hose adapter.3. Low maintenance - Disposable, no cleaning required.4. Versatile - works for hot tubs, pools, and gardening.Cons:1. Size - large and can be cumbersome.2. Capacity limit - 10,000 gallons may not suffice for larger pools.