Your cart is empty.
Your cart is empty.S. C.
Reviewed in the United States on August 21, 2024
My son loves his buggy body. The quality is top notch and the install was surprisingly easy. There is the question of where to put the ESC but you’ll figure it out! As far as performance, it turned his stock top-heavy hard body Bronco into a low slung beast of a crawler that gives my full frame scx24 with many mods a run for its money. But the real reason you should go for this kit is the customer service. Initially the kit was missing parts, but I emailed Injora and they had a replacement sent to me in about the time the first one took to arrive via Prime. That’s really the measure of a good company for me. I’ll definitely lean toward Injora in the future.
Rick
Reviewed in Canada on March 2, 2024
Great kit to assemble for SCX24 skid. Everything bolted right up and it climbs amazing.
Laffz
Reviewed in the United States on December 9, 2024
Great buggy shell. I started with the shell and built an rc around it. It is a little tight fitting the esc and all the wiring inside the shell. I love the look. Great side project building a rig out of spare parts.
Ryan Watmough
Reviewed in Canada on December 16, 2024
I had the deadbolt scx24. Wanted something different. Ended up buying c10 links and driveshafts. Pictured in my review I kept the longer deadbolt rear links and driveshaft with the front links from the c10. Figure it may help with hill climbing. Also the stock receiver/esc fits perfect under the hood, used supplied Velcro. Stock servo wire is a little tight but should work. No complaints on hardware supplied, had more than enough screws to get the job done. Highly recommend.
Duane
Reviewed in Canada on January 6, 2024
These Rock Buggy chassis are awesome, i have build two so far and are just an awesome chocie for your 1/24th scale builds, Great Job Injora, they offer multi colors and a clear body for your own color choices. the hardwear provided is great and they give you alot of extras. also include shock spacers for proper shock function. interior is good they could have included a couple little half boby driver to set it off. the only issue i had is trying to get the stock ESC mounted. I had to decase it and tape it to the underside of the front body panel. any aftermarket ESC like the lizard pro fits perfect along the sliders. Great buy and i will forsure get more to experament with differnet components.
Customer
Reviewed in the United States on January 16, 2024
This Rock buggy kit is awesome and has been super fun to build and upgrade. I mounted stock scx24 esc on the underside of hood which makes for a clean look and easy access to on/off switch. Depending how long your battery cables are I would recommend to get a battery extender plug to allow battery to sit in back. thanks again injora.
Khalifa Alboinen
Reviewed in the United States on April 11, 2024
This is an awesome product. It really opens up possibilities on the SCX24 platform and it looks really really cool in my opinion. Its also easy to put together which is nice, there are some instructions and as long as you follow those you should be good to go. The only issue that I had was finding a good place for the stock electronics and battery to fit. I got it done, but it was tricky. This would probably work best for someone who has already upgraded their ESC and radio system because there is room on both the right and left side of the chassis to put a receiver and an ESC. No big stuff though, make sure you're buying the smallest electronics possible if you want to use this chassis.
Justin
Reviewed in the United States on April 10, 2024
Awesome setup once assembled, but the instructions were not great. Super light weight, all parts fit well. Overall good performance for the price
Ka Man K. Tso
Reviewed in the United States on July 8, 2023
Decided to try the Injora buggy for my everyday rig. Performs excellent, my most capable rig right now. Super compact footprint, allows all the clearance you need. Great quality feel, easy to assemble. The only thing is my fat fingers tryna add electronics to the chassis. Great value overall!!!!
Annika Hodam
Reviewed in Germany on July 18, 2023
Das chassis an sich ist super. Alles passt super und macht einen stabilen Eindruck. Aufbau ist so einfach, da brauch man auch keine Anleitung (es sind 3 Teile die zusammengeschraubt werden). Hab alles auf Gladiator links und antrieb aufgebaut so dass er hinten ein wenig länger ist. Klettert super über den Einbau kann ich jetzt nicht viel sagen da bei mir Elektroniktechnisch nichts mehr original ist. Mein furitek System passt aber super rein.Jetzt jedoch leider das negative zu dem chassis. Es hat 3 Bestellungen benötigt bis ich 1 vollständiges/funktionierendes modell in den Händen hatte. Die 1. Lieferung kam gar nicht an, trotz garantierter am nächsten Tag Lieferung. 2. Bestellung kam pünktlich an jedoch war die rahmenkonstruktion vom Dach falsch gegossen sodass sie total verformt war und nicht eingebaut werden konnte. Die 3. Bestellung kam wieder 2 Tage zu spät trotz prime und die anbauteile fehlen... aber hey dafür 2 klettbandstreifen für die Akkus. Echt schwache Leistung von Amazon und injora. Hab jetzt aus den 2 fehlerhaften Bestellungen mir ein komplettes auto zusammengestellt und den anderen Müll schick ich zurück. Echt schade weil das teil echt spaß macht und sich super fährt. Jedoch werd ich mir das nicht nochmal antun auch wenn ich echt Lust hätte mein 1:10 umzubauen
Jason Morris
Reviewed in the United States on May 12, 2023
Performance is amazing worth every penny. I highly recommend. Will have 1 of every color soon. Tight fit. Decase& waterproof receiver and ESC makes it much easy if your doing brushless I have a sidewinder micro2 ecs . But well worth it. Love it my fave so far
Darren Ramsay
Reviewed in Canada on March 1, 2023
Overall, I really like the buggy. I did put longer screws in when assembling it, as the screws provided were too short and just stripped out. If you plan on running an aftermarket motor, you will have to do some cutting and determine the best place for the electronics. I had to trim the battery tray and notch the hood for my Furitek motor. I put the ESC on one side of the motor and the receiver on the other. I applied double sided tape to the edge and back of each and stuck them to the frame rails and the lower chassis.
Jeffrey Bressler
Reviewed in the United States on April 12, 2023
I like the room in it and how it looks. I didn't widen the axles so it is still small. With stock esc/receiver in it's case you may need to remove the seat piece (no cutting, just don't put in) for more room, but the was not an issue for me. I started with the SCX24 C-10 and everything went smoothly to this body. I have now fully upgraded with all custom parts so my C-10 is back to stock and have this little guy all modded with mostly injora. Overall their stuff seems good and they are helpful with any questions (I had a few).
Recommended Products
