Your cart is empty.
Your cart is empty.Key Features:Clear heavy-duty polycarbonate with protective filmProtective filmWindow masksDecal sheetLow profile inspired body, cab and window designNarrow and tucked front quarter panelsBaja profile cab with pronounced scoop and escape areaOverview:Straight from the Desert, this is a whipping design from JConcepts. The BAJR, as it is named, is concept inspired from the ground up to be the ultimate in desert and off-road looks and performance. The BAJR is a fresh design, starting from the front of the vehicle, the super narrow and tucked front quarter panel treatment creates one of the slickest Illuzionized looks around. The round Baja-esque profile of the cab area gives that familiar desert appearance. As the design develops toward the rear, the pronounced roof scoop, and proceeding cut-out and escape area makes this body unmistakably JConcepts. Pronounced rear fender flare treatment and dovetail rear end finishes off the most concept inspired Short Course body to date.The BAJR is all about being unique, competition ready and concept inspired. Get creative with this body; run it as a short course racing vehicle with competition tires or as a desert vehicle with paddle and ribbed tires. Go ahead, get crazy add a whip antenna; that’s what it’s made for.
Samuel Serrano
Reviewed in the United States on March 21, 2025
Very strong body. Use your imagination 👍
Jeremiah W.
Reviewed in the United States on January 27, 2025
Inaccurate size description more like 1/8 not 1/10 scale
Ryan
Reviewed in the United States on March 28, 2024
Awesome
Tim Helms
Reviewed in the United States on March 11, 2023
Nice thick plastic shell for the RC. Feels like it will handle a few good hits when Bashing the RC around the back yard. Will recommend.
MikeV
Reviewed in the United States on May 14, 2021
As soon as I saw this shell, I knew I needed to make it into a Luke Skywalker’s x-wing helmet design. I had a lot of fun working on it!The divots lined up perfectly for attaching it to my 1/10 Traxxas Slash 2WD. Trimming was tough. I used a Dremel tool with a cutting wheel to get close to the desired edges then used a dremel sanding cylinder to get the rest of the way. Followed that with sand paper to straighten my edges up.Seems like a solid shell. I love how it turned out.
Yammo
Reviewed in the United States on May 31, 2019
This is my first time buying a replacement shell and I was worried about painting it and how it would come out but it came out amazing. Absolutely love the shape of this body shell as well. I had previously converted my slash to a monster slash (2.8” tires and extended body mounts) and I wasn’t happy about the awkward look or the raised center of gravity due to the lifted body causing the truck to roll over easily. This body shell fixed both issues seeing as it looks amazing with the larger tires instead of awkward, and the open wheel wells allowed me to drop the body mount posts to a much lower setting which lowed the center of gravity just enough to drastically improve the handling compared to the stock Slash body shell with the larger 2.8 tires(which required a much higher body post setting while still having a ton of tire rub on the body unless you trim the crap out of the stock shell). With this J-Concepts body on the other hand the tires rubbing isn’t too much of an issue, but the front wheel-well still had a little rubbing towards the back of the tire when shocks were fully compressed and wheels were turned, so I cut the rear of the front wheel-well a little wider to avoid having to lift the body posts any further, but if you’re running standard short course truck wheels/tires than this shouldn’t even be an issue. One downside is that it looks too good and now I don’t want to bash too hard and scratch it all up haha. Same problem I had when I finished my Axial Yeti which is why it became a shelf queen, and also why I bought the slash to begin with so I can beat on it and bash it and replace the Yeti as a user RC. But I’m sure I’ll still bash it hard after babying it for a little till it starts to get a few rollovers and scratches. I mean for $35 I don’t mind replacing the shell occasionally, just takes a good amount of work prepping, cutting, and taping it off for paint but well worth the work and time. Side note I did spray the inside with spray-on pickup truck bed liner for 1:1 full size trucks to finish off the paint job. I don’t know how well or if it will help at all but figure the stuff is meant to be scratch and ding resistant to protect a truck bed from tools/rocks/cargo/etc so instead of taping the inside of the shell to prevent cracks thought this could possibly be more effective. Like I said who knows if it does anything but figured I’d give it a shot.
Alejandro
Reviewed in the United States on March 5, 2016
Looks like a solid strong body I bought this because when running the 2.8 tires they balloon at higher speeds this being fender less it won't rub I hope so I will see when I paint it looks pretty sleek
Yodafan88
Reviewed in the United States on May 20, 2014
Body works great! Painting was easy enough, not many hard lines or crevices to get into. Put this on my Slash 4x4 which works well, if you have front and rear stock bumpers the body does not reach end to end so you may want to remove the bumpers or swap em out for some shorter RPMs or something...Overall great body, has taken some serious beatings so far in the last month and still looks nearly brand new. Happy
Recommended Products
$16.99
$ 6 .99 $6.99
$23.99
$ 10 .99 $10.99