Shopping Cart

Your cart is empty.

Your cart is empty.

Jayron JR-HM004 Mechanical Hour Meter AC 110-250V No Battery Long Life Surface Waterproof Design Easy Installation for Generator Air Compressor Lawn Mowers Snowblower

Free shipping on orders over $29.99

$12.02

$ 5 .99 $5.99

In Stock

About this item

  • Mechanical Timing ---- Operating Voltage:AC 110-250V,Mechanical instrumentation inside to roll the gears around,Tracking the total working time of the equipment in real time,The working range is 0-99999.9H, 0.1H accuracy, and cannot be reset.
  • Appearance ---- The analog clock method uses the counting of rolling gears, the analog clock better than the digital , because in the event of failure it retains the elapsed time.
  • Data Storage ---- When the equipment stops working,hour meter retains the original data automatically, and the next timing period will start from the accumulated value.
  • Installation ---- Easy installation,Two installation methods:Not only can be fixed with screws(Screws not included), and also can be installed with a mounting bracket (included in the accessory bag).
  • Others ---- Brand new high-quality products;Mechanical design, no battery;Contains detailed instructions and installation accessories; Surface Waterproof rate: IP65;2-year warranty.



Product Description

1

NInE-ROnG has focused on product development and manufacturing in the fields of hour meter, battery indicator, multi-function meter,service for the garden machinery industry, outdoor power vehicle equipment, transportation vehicles.In addition, we are also committed to creating simple and practical day timers, night light, hygrometers and other products to add fun and security to our life.

hm004 1

hm004 3
Others
  • Serrated design on the side of the product holds the mounting bracket better.
  • The mounting bracket is movable and can be removed from the product.

Product Function

Mechanical Hour Meter

  • Two sizes available: HM004 AC 110-250V or HM004 AC/DC 8-80V.
  • The total running time of the display engine will be displayed and remain visible.
  • The timing mode is increment counting, the initial value is 0, and the maximum value is 99999.9H.
  • TOT is can not reset.If it exceeds the max value, it will be cleared automatically.

Power Connection

hm004 4

Installation&Application

hm004 5

Performance Test

hm004 6

Yellow resistance testing

  • It can keep good working condition from simulative strong UV ray lightening.
  • It also pass another considerate test for each functions sections and attached accessories.

hm004 7

Drop test

  • Has good shock resistance and protection.

hm004 8

High & Low temperature test

  • It works well at temperatures from -40 °C to +70 °C.

Specifications

Product NR-HM004
Specification HM004 AC 110-250V or HM004 AC/DC 8-80V selectable
Power supply type Externally powered
Timing range 0-99999.9H
Timing accuracy 0.1H
Panel cut-out 37.5*24.5mm( 1.47* 0.96in)
Product size 54*31.7*72mm(2.12*1.24*2.83in)
Housing material ABS
Product weight 64.3g

Kevin Skipper
Reviewed in Canada on May 7, 2024
good
Steven Dorey
Reviewed in Canada on February 16, 2024
Installed this hour meter on my new Husqvarna snowblower to keep track of usage for maintenance purposes, it will still count at low voltage while idling.
ING MARIO DUEÑAS
Reviewed in Mexico on February 12, 2024
OK
walter
Reviewed in the United States on January 4, 2024
I BOUGHT THESE FOR MANY BOATS OVER THE YEARS THEY ALWAYS JUST WORK. EASY SIMPLE 2 WIRE INSTALL, POWER TO KEY ON AND GROUND, DONE. SMALL ENOUGH TO FIT ANYWHERE. NO NEED FOR DIGITAL AND ALL THOSE THIS ONE JUST COUNTS THE HOURS AND MINUTES WHEN YOU HAVE THE MOTOR ON. CANT BEAT THE PRICE.
Terry
Reviewed in the United States on June 2, 2023
The media could not be loaded.
Tom Clothier
Reviewed in the United States on March 17, 2023
performs as advertised
Paul Lima
Reviewed in the United States on January 3, 2023
Installed this hour meter on our home well pump on 9 Dec 22; It worked for about 10 days and died. Not a good product
Kenneth A. Fingleton
Reviewed in the United States on January 13, 2023
This is my 3rd mechanical counter since 1986. The ranch I bought had an oil furnace. Back then oil was $0.96 a gallon. The top of the crawl space, 275 gal oil tank, cannot have a level gage installed. Additionally, it could not be read. So, I have been buying these mechanical hour counters to tell me when the tank needed refilling. The oil nozzle sprays one gallon per hour. When the counter advances 225 hours, it's time to call for delivery.My 1st counter lasted 16,000 hours and was replaced. The second lasted 5,000 hours and was replaced with this Jaron. It started loosing time at 000032 hours and I nursed it to 000226.I installed a 120V outlet on the furnace in 1986.. It go's ON when the flame is ON, and OFF again when the oil pump stops. To this outlet is connected an old fashioned electric alarm clock with a second hand.Although this clock only counts up to 12:00 hours, it is enough to check it against these mechanical timers if I do it daily. It is as accurate as the energy company that supplies the 60 Hertz AC power.When the oil delivery truck pumped in 248 gallons and left, I installed a digital, battery operated, gasengine run time / job time counter. It has a lead wire that wraps around a spark plug wire and senses pulses. I had already performed bench tests to see if the digital counter would work with a constant spark from a spare furnace ignition transformer. The counter is not fussy - it turns ON. Although the RPM feature reads 7028 it is of no concern on a furnace. (248 minus 226 equals 22 hours the Jayron counter lost since the heating season began) The digital counter reads in 1/100 hour increments. Mechanical timers have a habit of getting stuck between two numbers when it is time to read it. (Is it 5 1/2 or 6 1/2 or 8 1/2 ?)One cold winter, I ran out of fuel oil and had to go to the gas station to get 5 gallons of diesel fuel and pay the road tax on it. Thus the reason for accurate record keeping.On the PLUS side; The alarm clock and the digital clock are exactly in sync with each other.On the MINUS side; the instructions say the coin cell battery life is 168 hours. You would think it would work for a year or two like other small digital displays. "Time" will tell.
Edward J Mamon
Reviewed in the United States on December 6, 2022
I first plugged it into 120v to run the hours up to 24.x to get near machine logged use. As soon as I connected it to the 240v compressor it fried and never recorded 1/10th of an hour. Retested on 120v and dead....
Customer
Reviewed in Canada on November 14, 2022
Had bought 4 and they didn’t even last a year, they are not even waterproof as one stopped working at 12 hour and had water inside, very cheap, not to be used for anything outdoors.
G. Schenk
Reviewed in the United States on January 15, 2022
There is no instruction on the proper way to connect polarity to the spades. Will have to guess, and hope I don't burn it up in the process. The only mention of it is, "once wired correctly, unit will begin to count".Unit looks good, and once wired in will return to update.
Éric V
Reviewed in Canada on July 6, 2021
Les remplacer sur mon excavatrice Yanmar sv08 le mien était brisé. Considérant le prix du bien celui-là est excellente qualité et un très beau produit
Jeff t.
Reviewed in the United States on January 1, 2021
Works great! Used to count time on my air compressor.