Your cart is empty.
Your cart is empty. Kegco Standard Kegerator Refrigerator Conversion Kit No Tank - EBSCK-NT
This Standard Kegerator Conversion Kit from Kegco gives any do-it-yourself beer lover the tools they need to turn their refrigerator or freezer into a high quality draft beer dispenser. Thanks to a commercial grade dual gauge regulator that allows you to monitor both CO2 pressure in your keg and CO2 volume in your tank, and a lever handle keg coupler that is more durable and long-lasting than a wing handle coupler, you can confidently build your own kegerator with all the exciting features of a professional dispense system. Kegco is with you every step of the way, with detailed instructions included in every kit.
Kegco KC DP-64-D Drip Tray, 6", Stainless Steel
The dp-64-d is an all stainless steel door mounted drip tray. This drip tray is 6" Wide and is mounted to the door through two screw holes on the backsplash. The drain on this drip tray accepts a 1/2" I.D. Tubing or piping. This drip tray is popular due to its clean design and durability. The top vent comes off for easy cleaning.
Newks
Reviewed in the United States on July 13, 2023
Very easy to set up
Huw
Reviewed in the United Kingdom on June 18, 2021
I’m sure the product is of good quality. However, the regulator did not fit the standard CO2 bottle and the coupler only works on American beer kegs such as Bud. On reflection I should have realised since the product came from Canada. Whilst the coupler may come in use in the future if I buy an American lager rather than European lagers such as Moretti, Amstell or San Miguel, I feel like I’ve spent a lot of money for two plastic tubes.
East Bay Chopper
Reviewed in the United States on December 26, 2021
DBrooks
Reviewed in the United States on September 29, 2020
Works great. Turned my old fridge into a kegerator on the cheap. I had to run my co2 at around 2psi to get the head down. My tap sits lower than the top of my keg, so first beer is little foamy.
Happy one
Reviewed in the United States on December 8, 2020
Being in lock down I needed my local micro brewery beer. Found out about 1/6 barrel availability. Punched a hole in the garage fridge and installed. Works awesome
Aaron J
Reviewed in the United States on October 28, 2016
Bought this to convert a side by side Kenmore fridge to a keg fridge.Easy install, good quality components. Took me about 2 hours to get a keg up and running!Read over some home-brew forums before your start the project to get some tips regarding install and keg sizes etc. This is definitely a measure twice, cut once project.
High Standard
Reviewed in the United States on January 11, 2014
The first issue I had is that I didn't receive the Sanke keg coupler with the kit. I went ahead and ordered a replacement so that I wouldn't have to wait to resolve the issue with the supplier. I then proceeded to hook up the rest of my equipment so that everything would be ready when the coupler arrived. I then found that the regulator didn't work. With the pressure adjustment reduced to the minimum setting, the outlet gauge pressure continued to rise until the blow off valve relieved pressure. The pressure would continue to rise and blow off in this manner continuously.HomeBrewStuff sent me my missing tap by priority mail and I was eventually able to get the regulator to hold pressure after cycling the pressure adjustment.I did later hear a leak on the tap which I thought I fixed after removing and re-seating the tap. A few days after this my CO2 tank was empty. I refilled my tank and sprayed the tap with soap water to test for leaks. The tap was leaking from between the tap stem and tap body. I disassembled the tap and found that the stem o-rings were misshapen. It appeared that the valve was assembled without any lubrication causing the o-rings to twist and leak. I lubricated the o-rings, reassembled the tap and tested for leaks. So far I haven't found any leaks but I make sure I don't leave the CO2 on in case it begins to leak again.
F. Criss
Reviewed in the United States on June 4, 2013
I used this kit to convert an old refrig to a kegerator. I did not get all of the items promised. i had to call and the rep said that the gauges and the CO2 tank were not included in the price. i had to send the a picture that i downloaded from Amazon that showed the CO2 tank and the gauges. They sent the gauge but not the tank. Then they informed me that they would update the picture to reflect what the product actually included... wasn't too happy that i didn't receive the tank ... but all in all, still was a pretty good deal.
mortgagemescott
Reviewed in the United States on January 7, 2013
My old parts were leaking air somewhere and I couldn't figure it out. It had sat stale for awhile as I was tired of getting the air tank refilled.I ordered this set, replaced everything and now the beer has never tasted to fresh! The regulator looks professional, I really like that! My old sankey looks a bit aged, so nice to have a clean look there too.I have not been losing CO2 so I know my problem before was either in the tap or regulator. Glad this kit fixed my problems and made my kegerator awesome all over again!
Recommended Products
$1,159.00
$ 99 .00 $99.00