Your cart is empty.
Your cart is empty. Keyfit Tools U.S.A.PAVER PULLER PRO 9" (2 Piece Set) Contractor Grade 4140 Heat Treated & Case Hardened Steel With Joint Scraper Micro Teeth & Gripper Slots Paver Extraction Removal Raise Sunken Brick & Pavers Locked by Edging
Designed Specifically For Pavers By Landscape Contractors
Not Weak Stainless Steel Auto Trim Pullers That Claim to be Paver Tools
Stainless Steel 2 Prong Pry Tools Will Bend & Fail
9" x 1" Heat Treated 4140 Hard Coat Zinc Plated Steel Leverage Bars Designed For Pulling Pavers, Stones, Blocks & Bricks Locked In By Edging & Other Pavers
INSTRUCTIONS: Use the Keyfit Tools Paver Puller to pry all 4 sides of the paver block back and forth slightly to get a slight gap so the block can move. Use the Keyfit Tools Paver Puller on opposite ends working the block up and out. Move each side up little by little one side at a time. Do NOT Force or try to pry the block up both sides at one time. This will result in bending the tool & chipping or cracking the block.
2pc set for raising sunken pavers with sand & polymeric joint sand ~ Attention: The Keyfit Tools Paver Puller will not work if your pavers have been permanently set to each other or to the base with adhesive or concrete.
~See all our tools at Keyfit Tools ~Keyfit Tools Patented Trademarked Products ~Innovation Never Imitation
ALTON BUSH
Reviewed in the United States on January 27, 2025
They did the job, I was able to remove my pavers.
Ruben Marques
Reviewed in Canada on September 6, 2024
Useless
S. Livingston
Reviewed in the United States on September 16, 2024
Quality is fine, wish I would hope for since it's simply a metal tongue depressor. I purchased these two level off several pavers. Please didn't do any more for me than the old screwdrivers I opted to sacrifice for this task. They didn't fit between many of our pavers so I had to remove up to a few surrounding stones to get to the ones I needed to fix. I've decided I'm going to try to add a very slight arc to about 1/3 of each blade from the end and hammer the hook to give it a slight offset as well. I'm hoping, for the stones these fit between, that this will allow me to get just enough of a bite under a stone to ease lifting it out. As purchased, I use the blades to get just enough stone up to grab with my fingers and use a coordinated rocking movement with hands and tool to lift stones out. I'm getting by with this approach but it takes quite a bit of hand strength.
CSM TMB
Reviewed in the United States on August 9, 2024
Good for working loose patio pavers to make repairs……👍
Cia
Reviewed in the United States on July 26, 2024
The design of this tool very functional for the rounded and less thick bricks. I have non grouted standard bricks in my backyard that needed to be cleaned. Some of them were impossible to clean so I wanted to flip them and use the cleaner side. I needed a better tool than two screwdrivers to lift the standard brick out of its setting. This tool was a bit too thick to get between the brick, so I returned them. If my brick were not as high the tool might have worked. I gave them a four star because they would work for the newer bricks, mine are about twenty years old. Hope this info helps with your project.
B Rock
Reviewed in the United States on June 5, 2024
I was surprised how expensive these very simple tools were, but they are top quality. They are very helpful in pulling up pavers but I suggest also having a wonder bar handy. They are also useful in scraping dirt off pavers, and scraping between pavers. My pavers were very tightly packed together and quite a challenge to remove, especially the first one.
D B O
Reviewed in the United States on March 27, 2024
Normal Pavers have very thin (~1/32”) ridges on all sides which hold them apart only ~1/16” to allow very fine “Paver Sand” to fill the space between them. Additionally, pavers are radiused on all top edges, leaving the flat sides (which must be gripped to pull them) roughly 1/4” below the top surface. (See photos)These “Pullers” are 1/8” thick which prevents them from fitting in the small gaps between pavers. This fact makes them completely useless to “cleaning” gaps between pavers as advertised.Finally, the business end of them, are stamped (NOT GROUND) leaving the teeth rounded and incapable of gripping the sides of a paver (See photos). The ends, do appear to be “Case Hardened” making them essentially impossible to file. However, IF you have a grinder with a silicon carbide wheel they can be improved.Overall, the concept is good, unfortunately VERY poorly executed. This product was certainly never “Field Tested” to confirm actual usability. I am VERY disappointed and annoyed that I spent $29 on a completely useless product!
Darryl
Reviewed in the United States on March 13, 2024
On of our pavers began to tilt around the edge of the pool resulting from the sand base not being compacted we in this area. I was until to utilize the paver puller on this paver, however, I found one one row over that had sufficient space on the sides in which to insert the paver pullers. With very little effort I was able to move the paver up high enough to grasp with my hand and pull the paver all the way out. I pulled out pavers working my way to the problem paver. Installed sand to fill the void, leveled the sand and reinstalled the problem paver which was now level with those around it. Filled in the other pavers that were pulled and the final result was the all pavers are now level with the edge of the pool.
Emmanuel Bashakes
Reviewed in the United States on November 7, 2024
Works well, strong
Recommended Products
