Your cart is empty.
Your cart is empty.Product Description
BRANDON
Reviewed in Canada on March 6, 2024
Not the thickness they claim , all seams are welded but no clean up was done before powder coating. welds are not eye appealingpackaged up nice , well protected for shipping .
Jason
Reviewed in the United States on March 3, 2024
Great price for a nice addition to my 94 ls swapped wrangler very happy with bumper, easy install fits great looks amazing cheers to them !Very happy bought front also to match!
Louis Racine
Reviewed in Canada on February 5, 2024
Good quality, nice finish fast delivery, packed amazingly well . Perfect fit with little to no modifications.
Gary g.
Reviewed in the United States on April 6, 2024
Looks good ,fits perfectly 👌
Customer
Reviewed in the United States on April 28, 2024
Easy to install, back up light work great and very bright.
Turner22
Reviewed in the United States on January 1, 2023
This product is super cheaply built. Thin pop can steel, I had to modify the bold holes to fit the factory Jeep brackets, the finish on the bumper was chipped and scratched to bare metal. You get what you pay for that’s for sure. It looks ok just cheap. I wouldn’t tow anything with the receiver that’s on it. It only has little skip welds holding it to the bumper.I was going to return it but it would have cost me $50 to return so I just kept it
Kim Conway
Reviewed in the United States on May 17, 2021
First of all, I’m a welder and this thing is sketchy as heckkkk!!! If you’re just going for aesthetics, it’s a decent buy. But if you want this for functionality, HAAAARDDD PASSSS. Ladies, I’m a girl so I know this looks cool, but PLEASE don’t buy this. Save your money for a better one. I had high hopes even though I shouldn’t have, considering it’s a $180 bumper lollll.So this started off great! The packaging was awesome. However, things took a turn for the worse. There was rust on it straight out of the box. Next, half of the welds were cold lapped or undercut (to explain it easily if you don’t know what that means, it means that the welds weren’t fused to both plates, and the undercut means that it dug into the metal TOO MUCH. Both are bad and means the welds aren’t strong). AND there was an excessive amount of spatter (ever heard of anti spray or a grinder my dudes??) There also was a big ole hole in the metal where they burned through that they didn’t even try to fix. The fit up of the plates were horrible. I really can’t believe this past quality check!!I’m pretty sure this is 11 gauge steel, so not very thick, which is fine, but I have worries about the hitch. Literally looks like it would just break right off during the first use. The loops where you hook your D-shackles are WAY thicker, but barley welded on there and look like they’d just shear right off lol. I’m just going to make my own which will be 100x safer and better, and I know a lot of you can’t just make one, but I highly recommend just saving your money for a better one, it’ll be worth it.Overall, I’m not impressed. If you don’t go off-roading, I guess you could use this and be okay. If you wheel at all then I wouldn’t waste my money on this thing. I never actually installed this, so don’t look at my ratings bc I never got the chance to test it out. Just looks too sketchy. I hope this review and these pictures save some of you from wasting your time and money.
Brad lamb
Reviewed in the United States on January 9, 2021
Very impressed with how well it was packaged was wrapped inside of a wool packaging and then wrapped again with a padding around it in a box that was all zip tied to the bumper the only issue is the hardware it came with the bolts are about three times longer than the factory hardware and I do not believe they are grade eight bolts but other than that the bumper looks good one of the tabs is slightly bent but I do not believe I even use it on my model Jeep.
JAG
Reviewed in the United States on August 5, 2020
Installed on an 89 YJ frame.. Well built overall. D-rings look like they'll hold up. Welds look good, fit and finish look good. The tabs that bolt to the bottom of the rear frame were a little tweeked and didn't line up very well, but that could have also been my frame. I'm 85% happy overall. My only complaint is with the receiver. Its thin wall box tubing and there's no real structure in the bumper to support any kind of weight. I'd rather there be nothing than this. I'm most likely going to cut it out and weld in a real receiver hitch section and reinforcement. But, for the price, I'm not too upset. The lights are a nice touch since I didn't have any reverse lights before.Edit: I still stand by this bumper, but did recently bend the mounting brackets while pulling from the D-Ring. So, the bumper sticks out about 3/4" more on one side now. To be fair, I was pulling a 60' tree limb (16"+ diameter on the big end) in low range, so I was asking a lot.
Rafael
Reviewed in the United States on April 29, 2020
This thing is awesome! Such good quality is put into this. It's a nice design, very good welds and the inside of the bumper has good support. The powder coating is done very well. And the packaging has such attention to detail. I still have yet to test the lights and fitment, but I'm already impressed. I will edit if something is wrong
Recommended Products