Your cart is empty.
Your cart is empty.Product Description
Single Gang Surface Mount Backbox, White, 1.89" deep A single gang housing for surface mount installation in hard wall or open office environments. Compatible with all Leviton QuickPort and MOS flush mount wallplates. Accommodates various raceway types. Backboxes have tie wrap anchors at each inside raceway entry point. Screws and tape provided for mounting. Compatible with all Leviton multimedia wallplates, including QuickPort wallplates. Two piece construction.
From the Manufacturer
Leviton's extensive line of snap-in modules allows complete field configurability for the installer. Leviton QuickPort housings, such as wall plates, MOS housings and modular furniture faceplates, can be configured with a custom combination of QuickPort modules which easily snap in or out of ports. Surface Mount Back box, Single Gang, White, Box Depth Is 1.89 Inches.
junior
Reviewed in the United States on March 31, 2025
Worked as described and allowed me to install an updated outlet with a USB-C connection.
Juan Birrueta
Reviewed in the United States on March 29, 2025
As you can see this wall cover comes handy when you want to hide wires. You can customize it to punch holes and can even paint it. Easy to use and no tools required to cut custom holes to pass wires.
maria
Reviewed in Canada on March 17, 2025
I really like this box, enable the wires to breathe due to some nice grooves behind the box. You can snap off any predetermined holes in the back so that you can pass wire.Fits perfectly in my wall and respect code dimensions.I recommend this box
Joe D.
Reviewed in the United States on February 28, 2025
I had a sensor light switch installed in my closet. It worked ok, but I really needed to go into the closet for it to 'see' me. I thought it would work better if the light sensor was a few inches away from the door molding. I purchased this product to move the sensor away from the wall and it worked just fine. I am now 'noticed' more quickly when I enter the closet. As far as 'How was the item'. I would say it did what I needed it to do, however, it was a bit flimsy and bit difficult to install. I never touch the wall switch anymore because it senses me and turns on and off. If I had to handle the switch on a daily basis, I think it would eventually fall of the wall.
N. Maione
Reviewed in the United States on January 14, 2025
Everything is predrilled and cut outs are easy to break off. Works great
Dan R. Scivally
Reviewed in the United States on April 9, 2025
Excellent product at an excellent price.
JS
Reviewed in the United States on April 7, 2025
This is a decent product, but there are 2 things I dislike. And I was using them in a boat, which might be more unique than typical home/garage installation (although my issues do apply as well).#1 - the box is angled, ie the back where it meets the wall is larger than the face. The 4 sides angle inwards for some cosmetic reason. The practical problem is if you were to attempt to install these where say a horizontal surface meets a wall (like say atop a countertop or work bench that is attached directly to a wall) - the little cosmetic twist makes it so there will be a funny gap underneath the box and you can't fasten it to a horizontal surface. Or similarly, if you put two of these next to eachother, there will be a funny angled gap between them since they are not a square box.#2 - the backside of these snaps into place, ie the box you see in the pictures is not one piece of plastic. I do not know why they do this, there isn't a reason to take the backside off when installing them. And the trouble is, if someone bumps into this box and unsnaps the backside (which is how you mount it to the wall) the other part of the box along w/ the outlet is going to be dangling with exposed wires.
Chad Mcdaniel
Reviewed in the United States on April 12, 2025
Good
EdgarR
Reviewed in Mexico on July 3, 2024
todo bien pero es frágil
Bradley L. Shortell
Reviewed in Canada on July 28, 2024
Functions well for a non (in wall) installation.I did gave the option for an in-wall box install so this box served well for an on wall installation.
Emilio Torres
Reviewed in Mexico on June 16, 2024
Se requiere remplazar las chalupas de acero/aluminio y hacer un hueco un poquito mas grande, pero un albañil lo realiza con mucha facilidad. Sirven para poner los contactos de audio de manera excelente.
Customer
Reviewed in the United States on March 2, 2024
Too thin and not sturdy. Returned for refund.
miguel angel hernandez
Reviewed in Mexico on January 5, 2024
Excelente producto de calidad y bajo precio. Lo recomiendo ampliamente.
Recommended Products
$3.36
$ 0 .99 $0.99