ALVIN MAULDIN
Reviewed in the United States on August 22, 2024
Good price, came in fast and good quality. Hope they will do a better job and hold up in all the road use. Thanks
Jeff H.
Reviewed in the United States on August 18, 2023
It's hard to believe the difference in my camper after install, hardly know I'm towing a tt. Easy install, about 2 hours by myself. These will go on any camper I pull from here on out
Customer
Reviewed in Canada on July 30, 2023
Installed them then I realized the holes aren't square. One of them the middle bushing was welded with the sides having clearance. The second one welded right to the edge so when you Installed it and tighten the bolt up it doesn't move. The second one measures 1.825 wide instead of 1.75". That's why it locked solid. Will have to find a longer bolt to make it not wreck my hangers.
Laurie Marie
Reviewed in the United States on December 21, 2023
There were missing welds and weld spatter all over. The paint was also missing on parts.
Benoît Gauthier
Reviewed in Canada on August 15, 2021
Ce produit semble faire son travail sur la route. Il y a une différence mais pas pour tout les dommages de la route. Ma roulotte pèse 7 774 lbs à vide et rempli elle doit être autour de 10 000lbs avec vélo... J'ai remarqué que les blocs de cahoutchou semblent débordé de chaque coté. Je me demande combien de temps le produit sera efficace. Pour la finition, il y a du travail à faire car il y a des marques de meuleuse sur le métal. 2 bolts graissables auraient été appréciées. J'ai parcouru 285 km pour l'instant et je serai fixé sur la qualité du produit après mes vacances.
TrikePete
Reviewed in the United States on June 16, 2020
Fairly easy install.
mtnman
Reviewed in the United States on December 30, 2019
I'm not sure why trailer owners put up with the bottom quality of components that are offered by Lippert. In any other application, this would not be acceptable. Lippert applied such a high torque to the bottom two bolts that the metal housing is noticeably and permanently bent inward preventing both of the shackle arms from their intended movement. In addition, these two bolts, which by design are intended to rotate, are locked into place by such a high torque value. Attempted to talk to Lippert support without success.
The Other Ray
Reviewed in the United States on January 3, 2019
Ready to upgrade my trailer suspension! These Equa-Flex equalizer hangers came in a day early! Opened up first box, then a second (stapled) box, then the damaged original box! To be quite honest, if you are sending used, defective parts at full price I will order from another company. These hangers are supposed to come with six, uninstalled Lippert never grease bushings. Nope. they came with "wet" bushings, already beat into place. The connection arms are to be free to articulate and move against the rubber bushings. One is bent in on both sides, so much that the arm will not move at all (see pictures). Not happy. Glad for Amazon's return policy, however. Two stars for that?
J
Reviewed in the United States on July 21, 2017
I installed this along with the Dexter Axle Flip kit and "Never Fail" hardware kit onto my trailer. The end result is an awesome looking trailer that rides a million times better than it did from the factory even though I gained 6 inches of ground clearance (I also installed 4K springs vs 3K that originally were on my trailer and sagging). I will try and post before and after photos. While driving highway speeds, the ride is super smooth, yet taught around corners. While drivIng around town to stores or fuel stations with high curbs, the suspension conforms perfectly and smooth without jolting my truck at all. I highly recommend over stationary equalizers.
Doc Inman
Reviewed in the United States on October 25, 2016
Quality product, good welds. Not the size I needed, however, and Lippert Customer Service is poor - after giving the rep all requested information including measurements and serial numbers, I was told this item would fit my trailer.This equaflex is huge! Way bigger than existing hardware- maybe this would fit on a dump trailer or something.