Your cart is empty.
Your cart is empty.Product Description
LSMIITTH Professional Metal Smelting Furnace Kit, Full Foundry Tools and Casting Accessories
LSMIITTH have years of experience engage in metal smelter kit for home, hobby, and commercial use. Furnace, forge, burner, crucilbles, and crucible tongs all are availabel globally. We are the first one to sell melting furnace with burners on both side, which ensures complete combustion of the metal in shortest time and save 20% gas consumption.
Propane Smelting Furnace Kits 4KG-10KG
Small Melting Furnace with 8KG Crucibles
1. Compact Furnace could contain 4KG to 10KG Crucibles
- Furnace Body Size: 10" diameter x 12"Height (25cm x 30cm)
- Inner Size: 8" diameter x 7.6"Height (20cm x 19cm)
2. Come with 8KG large Criclbles
- 8kg crucible: 5'' diameter x 6Height (12cm x 16cm)
- 8KG Crucible can melt 8 kg brass or 2.5 kg aluminum or 10 kg silver
Double Burner Metal Melting Furnace
- LSMIITTH designed with double forge burners on both sides of furnace. Flame evenly distubuted and heat fast.
- Each output is 100,000 BTU, save gas and time.
Maximum Operating Temperature: 2642°F/1450°C
Melting Metals: Brass, Gold, Silver, Copper, Aluminum, Zinc, Tin and other metals with melting points below 2372℉(1300℃).
Adjustable High Pressure Gas Regulator
- Input QCC type, output 5/8", connect to American standard Propane Tank directly.
- The maximum output can reach up to 30PSI (CSA). You could adjust the pressure with the regulator.
Professional Smelter Kit Content:
- 4KG-10KG metal melting furnace
- 8KG Graphite Crucible
- Dual stainless steel forge burner
- 1.5m gas hose with regulator
- 118ml graphite ingot mold
- 15.7 inch crucible lifting tongs
- a pair of protective gloves and igniter
Stainless Steel Meterial, Full Welding
Furnace Lid lined with 2 inch of ceramic insulation
Fully Detachable No-Hinge Lid
Connect the Forge Burner to the Melting Furnace
1. Put the coupler (the bell shape flame outlet) inside the hole
2. Slide the steel pipe through the hole
3. Screw into the coupler by thread
- Use the ceramic insulation to seal the gap between burner and furnace, which could prevent the fire splash
- Pull the burner outward after the burner installed, keep the burner head immersed in the caremic insulation, which could protect the burner head and ensure the crucible can be placed in the furnace properly.
The burner head is connected by thread, which could be replaced directly if it were damaged during long time smelting.
This forge burner can be used for knife making, blacksmithing, glass making or anything else you can think of that requires heating up stuff to a really hot temperature.
Regulator (Input QCC type, Output 5/8") can Connect to American standard Propane Tank