Luxor Multipurpose Adjustable Height Steel A/V Utility Cart with Cabinet - Black

Damaged Product was shipped. It serves the purpose but door can not shut smoothly

This is perfect. Good quality, I just wish that the bottom cabinet had a magnet inside to keep the door closed without having to lock it everytime, no big deal, I used tape & a magnet and it works perfect. I have the cable box, PS4, TV all hooked up on the electrical stripped that's connected to the cart. It is just so much better having one plug to make everything work versus all those ugly cords that were exposed previously. You can adjust the height of the cart when you put it together, which was very easy, I did it myself. With this cart we can safely roll the TV anywhere around the house without worrying about damaging or breaking the TV which has happened in the past from moving it around picking it up and putting it down. This is a much safer option. I also really the bottom cabinet, I was able to organize all the video games and remotes they are organized and in one place, so much better! I highly recommend this cart. I work at a hotel and I'm trying to get them to purchase one. The price is perfect the quality is good you will not be disappointed.

This cart was perfect for my needs, communication from the vendor was prompt when I had a question pre- purchasing, shipment was on time, had impeccable packaging, extremely easy to take out and assemble and the hardware was not a problem for me, where as it seems like it is for a few other customers. Hardware and pre-drilled holes on the cart were perfectly fine on my unit. It makes my custom-made, zoo-worthy gecko enclosure look like it was perfectly made for it as part of the custom design, fitting perfectly atop. Also because my vivarium is very large, very heavy, and glass, this cart is most ideal because it can roll on its large, heavy duty casters, making the enclosure tip and crash resistant (along with added cable tethers to nearing wall) during an earthquake event because it will roll and move with the quake rather than remain stationary, an architectural technique our larger buildings and skyscrapers have) - a most imperative CA state household considerstion for large objects, especially expensive equipment or in this case, objects with living creatures inside them. Two wheel lock features is of course ideal when performing maintenance, and the locks release themselves after some time which is great in case I forget to do so after cleaning and maintaining. Overall, I'm incredibly pleased I chose this item after multiple hours and days shopping hundreds of various carts, cabinets, and stands. I kind of can't believe how perfectly happy I am this with this item. Retail product-wise, it's the happiest I've been with spending my money on something in a very long time, and most of all, Lord Gecklington can sleep soundly knowing he's protected.

Overall, a very nice and sturdy A/V cart. I got it to use for oscilloscopes, frequency counters, signal generators, and similar test gear, and it does an excellent job for that. It was boxed well for shipping, though UPS did their best to try and destroy it, but I was able to bend everything back straight. The welds are done quite nicely and easily withstood the abuse of shipping. The door works quite smoothly and is aligned perfectly, and the full piano hinge really helps with that. The wheels roll very smoothly with no binding. And the steel is a decent gauge thickness and not overly flimsy. I picked a steel cart to minimize static electricity when using it around electronics, compared to the all plastic carts.Now for a few negatives. As other reviewers mentioned, it's good to put two screws on each upright for the top section rather than just one, but it only comes with four screws. My guess as to why is because the pairs of screw holes don't fully and completely line up to put two screws in. They probably originally designed it for two for each upright, but dropped it down to one when they realized their design was off (or that's my hunch as to why). That means you have to drill out the holes slightly to install additional screws. If you are wondering what size screws it comes with, they are 5/16"-18 x 3/4" button cap head screws with nylon lock nuts -- you'll need four of each if you wish to add additional screws.Another negative is that the screws for holding the power strip in place only have wing nuts, but no lock washer to keep them from loosing over time. You'll probably want some #8 lock washers for those -- you'll need at least two. I used external tooth lock washers rather than a split ring version, as I thought it would work better.Another negative, as mentioned by others, is that the rubber anti-slip mat doesn't have the hole cut already for the power cable feed-through -- a minor nuisance as it isn't very difficult to cut, but does require extra effort to mark it and cut it. It would have been nice to be done already. Also, it only came with one rubber mat and it would be nice to have two -- one for each shelf.And the last negative is concerning the power strip. It came with a plastic retainer piece for holding the power cord in place for when you wind it up for storage. That retainer is only on one side and it really needs to go toward the top so that it works with gravity when winding the power cord. However, I would have liked to rotate the power strip around so that the power cord comes out the other end, so as to put it on the back side and work better when using the cart. But rotating it puts the retainer on the wrong side. So, the strip needs to have a retainer on both sides and/or it needs to be reversible or have the cable exit on the bottom. Also, three outlets isn't really enough and they are turned wrong if you have any wall-warts to plug in. That means, you will have to get additional power strips for most usage cases for the cart. They should have provided more outlets and turned them to be used more conveniently.The assembly is fairly quick and simple, but you do need a few tools. First, you need a giant rubber mallet to beat things back straight and to drive the wheels into place, and you'll need a small block of a hard wood to use for driving the wheels in so you can apply the force straight down into the shaft of the wheels and not be hitting it at an angle with all the force on the axle.If adding additional screws, you'll need a drill to drill out the holes slightly, along with a 5/16" drill bit and a shop vac to vacuum the shavings out of the storage compartment and off the floor.For tightening the screws, you'll need a 1/2" socket on a standard 3/8" ratchet with a short extension. The reviewers complaining that their wrench won't fit probably weren't using an extension, or perhaps they were trying to use a combination wrench instead of a socket wrench. But you will need a socket wrench and you will need the extension. You may also need your own hex key wrench. It comes with one, but the one I received seemed to be sized weird. It would fit the screws that came with the unit, but not the extra screws I got for making things stronger. However, when I used my own hex key wrench, it (strangely) fit both sets of screws perfectly.And you'll need a phillips screwdriver for tightening the screws for the power strip (don't forget to add the lock washers or some thread locker). And you'll need a marker pen and a hobby or utility knife to cut out the circular opening on the rubber mat for the power cable hole.Overall, though, despite a few negatives, it's a pretty nice cart and does everything I wanted it to do. It's sturdy and rolls smoothly.

Excellent product well made easy to assemble, the only complaint is the type of bolts supplied for the assembly, hard to keep them from turning when tightening the locknuts. Other than that I highly recommend this product.

The product is way OVER priced for the quality of the product. The item also comes with 4 nuts & bolts to be used in assembly. 1 of the bolts wasn't threaded so I couldn't complete the assemble without having to make an extra trip to the hardware store for a replacement. The pictures shows the items with cutouts in the top shelf & mat. There is only 1 hole in the top shelf and the mat is not cut for it. The bottom door is very flimsy and the locking mechanism is not very good. It does roll and the height is adjustable, but not the quality I was expecting for the price, nor are the features the same as in the picture.

This cart is very sturdy, but also good-looking. It was also quite easy to assemble. I really like the built-in power strip and extension cord and the lockable cabinet at the bottom. It works perfectly for my needs.