Your cart is empty.
Your cart is empty.The Magpul M-LOK Bipod mount allows for the attachment of Harris-Style stud mounted bipods to M-LOK compatible hand guards and for ends. The M-LOK Bipod mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the Bipod sits closer to the mounting surface than other adapters while providing superior support to the Bipod for strength and stability. The Bipod mount is also compatible with other accessories that attach to traditional sling studs. Machined from mil spec-anodized aluminum, the M-LOK Bipod mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and for ends is included. Max overall length of 2.33 in.
Peter M.
Reviewed in the United States on February 14, 2025
Typical for Magpul, this is a nice high-quality part.
david
Reviewed in the United States on January 18, 2025
As advertised by seller
Client d'
Reviewed in Canada on July 24, 2024
L'élément offre une bonne rigidité.
Jon Linville
Reviewed in the United States on December 20, 2024
I was happy to see that this is made of steel, so it holds tight to the MAGPUL bipod. I would suggest a dot of blue lock-tite to keep the screws from vibrating loose.
Michael
Reviewed in the United States on October 28, 2024
I bought a Chinese knockoff and it didn't fit the Harris bipod. This one fit great. Easy to install. Lightweight. Quality.
RB
Reviewed in the United States on October 28, 2024
This well made bipod mount works great with my Harris bipod. Easily installed on my rifle, taking less than a minute. Highly recommend.
Cliente
Reviewed in Italy on February 16, 2023
Prodotto ben fatto e consegna veloce
Yonks
Reviewed in Canada on December 24, 2023
Easy to install and works great!
Ronald Richard
Reviewed in the United States on September 7, 2022
I don't know what the hell kind of knockoff lok-tite they started using but as others have said, it's so thick it wont even screw on. I had to soak mine in carb cleaner and I had actually had a screwdriver with the proper bit, it's basically impossible with a regular allen key. After I soaked them I used a paperclip to get as much off as I could and it STILL wouldn't screw in. Then I tried heating it up with a hairdryer in hopes of loosening it, STILL wouldn't screw past two turns. Finally I put some Wilson Ultima Lube 2 on it and was able to get it in.It IS a tight-fit, even with Mapul brand bipods, it'll eventually go on though, but yeah, not sure why they made the teeth go so wide but not wide enough for the actual product it's designed for, I was trying the MOE Bipod which was specifically made to be QD Sling Stud. I bet the actual full priced Magpuls are even hard to get on. Anyways, once it's on, it's not going anywhere.In hindsight I probably would have just gotten the regular Bipod instead of the MOE and got it with the Pic Rail attachment, it's not like I'm ever gonna take it off.
Customer
Reviewed in the United States on July 27, 2020
I bought this as a sturdier alternative to the sling stud included with the Mosin Archangel stock.I had measured the bottom barrel vents and they are close to M-lock but not quite. However this worked beautifully after I did some file work on this adapter. Once you file off the middle protrusion and one of the four alignment protrusions around the screws (an outside one) It just squeaks by for a tight fit, which is what you want! The M-Lok nuts do extend enough to grip the stock although looking down at them they just grip the sides and don't look to be strong, but in practice so far they are and hold quite well. I figure if they somehow work through the polymer stock and loosen or fail I can just put a larger washer in and all will be good. Even if they work all the way through the stock (which I doubt they will) once a washer was installed It wouldn't be visible as it's underneath this adapter anyway. It works for what I wanted and looks good on the OD green stock:)
FleXer
Reviewed in Canada on August 21, 2018
Fits M-Lok perfect good quality too
Customer
Reviewed in the United Kingdom on September 3, 2017
Perfect for attaching Harris bipod to my Tikka TacA1
P. Kelley
Reviewed in the United States on June 24, 2017
Sleek and strong. Smaller than you would expect. Worked perfect for my Magpul Hunter 700 stock. I used it on the 'driver's' side as I had a bipod on the bottom. The synthetic material gave me a little trouble because of the soft loc-tite on the little allen screws. They wouldn't turn against the synthetic material and lock themselves. I had to tighten them down to the thickness of the stock material and this sorta 'wedge' the piece up to create enough resistance to 'lock' the M-LOK. You'll see what I mean.I used this for a rifle sling off to the side and have to say that I like it better than the traditional sling mount on the base of the rifles. The trigger well, etc was always poking into my back. This time the gun is flat against my body and feels more comfortable and secure.
Recommended Products
$20.99
$ 10 .99 $10.99