Your cart is empty.
Your cart is empty.Product Description
Manual and Automatic Transfer Switch, AC120V 15A ATS Auto Transfer Switch, CZH-LABS OONO F-1063
- OONO F-1063N Manual and automatic transfer switch, an easy to mount 15 Amp inline transfer module provides switching between AC IN1 (Inverter or Generator) and AC IN2 (Utility or Shore Power) AC source. With input and output and switch status indicators. It has a manual power switch function, which can quickly control the on and off of the output. With the function of automatic and manual working mode, the product can work in automatic mode, and the input source can also be selected manually.
- Automatic mode (MODE switch set to AUTO): when AC IN2 (Utility or Shore Power) is powered, the load power will be switched to AC IN2, when AC IN2 is powered off, the load power will be switched to AC IN1 (Inverter or Generator). Manual mode (MODE switch set to SW1 or SW2): You can manually select AC IN1 (Inverter or Generator) or AC IN2 (Utility or Shore Power) as the input source according to your needs.
- Operating voltage AC 90 to 135V 50/60Hz. Maximum current 15 Amp. Transfer time less than 30mS (0.03 second), for most smart devices or computers, the switching action of 30mS time will not affect their normal operation.
- Internal four high power SPST relays switch design, effectively avoid the problem of DPDT relay high inductive load arcing. Live and Neutral wire are switched at the same time. The Ground wires of the two inputs and output are connected together internally and will not follow the switch on and off.
- IP66 waterproof level design, suitable for indoor or outdoor use. AC IN1, AC IN2 and AC OUT cables: Length 19 inches (0.5 meter), 14AWG (2.08 square millimeter) x 3 cores.
SPECIFICATIONS:
- Input or Output Voltage: ………………………… AC 90 - 135V 50/60Hz.
- Maximum Current: ……………………………….. 15 Amp.
- Transfer Time: …………………………………..... 30 millisecond.
- Input / Output Cable Length: …………………… 19 inches (0.5 meter).
- Enclosure Waterproof Rating: …………………. IP66.
GT
Reviewed in the United States on August 11, 2024
I purchased this unit to protect our networking using a swappable battery inverter. This allows me to switch out the inverter without shutting down the IT equipment in case the inverter or UPS is low on power and the main hasn’t come back. Think network or server racks where you don’t have a high end UPS with hot-swappable power supplies or don’t want to break the bank to guarantee constant power to your equipment. There is a slight delay with detecting and outage so some low end equipment might get affected so you get what you pay for. Good for RVs, mobile streaming carts, LAN events, etc…
Avid couch surfer
Reviewed in the United States on July 7, 2024
The transfer switch is designed for switching from generator or inverter to shore power or camp site power for boats, campers, or other portable equipment. In the U.S. the standard AC utility power is delivered at 60Hz or 0.016s per cycle and this automatic transfer switches in 30 ms or 0.031s which is just under two cycles. Most electronics will continue to run if the time between power switching is around 30 ms, which is what most UPS and EPS claim for switching times from utility power to generator battery backed power.My plan was to use this auto-transfer switch for my battery backed solar array in the house to have the refrigerator and other critical devices running on solar power and when solar is not available to switch to utility power. The transfer switch is capable of doing this but the housing is made of plastic and there is no UL or ETL certification for this switch. I was planning on putting the auto-transfer switch inside a metal electrical utility box rated for inside locations, but without any UL or ETL certification I'm hesitant to place this plastic housed switch inside an enclosed metal electrical box mounted inside the house. If you're using this inside a boat or a car towed camper typically it's short term use and not permanently installed in a residential location. I deducted one star because there is no safety certification for their product and the case is made of plastic not metal.
Darryl
Reviewed in the United States on May 29, 2024
The media could not be loaded.
Yairelis
Reviewed in the United States on October 6, 2024
It works perfect,I used it for small loads and have not have any problems so far.
M
Reviewed in the United States on January 24, 2024
I cannot recommend this for anything. It lacks any and all testing certification marks. NO CE Conformité Européenne, NO UL Underwriter Laboratories, NOT even a single ANSI marking. Do not use this with a home generator or solar/wind set up as you might seriously injure or kill a lineman with this un certified product.
wlw603
Reviewed in the United States on April 5, 2024
This transfer switch works as expected. In automatic mode, it prioritizes source 2, and switches quickly to source 1 when 2 loses power or has a significant dip in voltage. When in manual mode, it stays on whichever source you select. However, this device has literally zero safety certifications, so using it in a serious environment would definitely give me pause. These certifications are necessary to ensure this device will not melt, cause a fire or electrocute the user, and without certifications I would not trust it to not have these issues. While I had no problem using a heavier load on it, I would still only do that for a short period of time, just to be on the safe side. If this had safety certifications, It would be 5 stars from me, but the lack of any safety certification caps it at a 3. It works fine otherwise though.
Recommended Products
$229.99
$ 93 .99 $93.99
$244.35
$ 99 .00 $99.00