Your cart is empty.
Your cart is empty.This UCF SQUARE FLANGE-MOUNT BEARING consists of an INSERT BEARING and a CAST IRON housing. The SQUARE FLANGE-MOUNT BEARING can be mounted on levelled surfaces using the Four Bolt Holes. Grease Fitting Offset on top to Relubricate the bearing. The INSERT BEARING has Two Metal Shields to Protect the Bearing from Dust or any Possible Contamination. Has a Set Screw Lock on its surface, for securing the shaft. - Specification: Item UCF205-14, Series UCF200, Bearing Number UC205-14, Housing Number F205, Number of Bolts 4, Bolt Size (S) 3/8 in, Bearing Bore Diameter (d) Metric 22.225 mm, Bearing Bore Diameter (d) Inch 7/8 in, Bearing Width Inner Ring (Bi) Matric 34.00 mm, Bearing Width Inner Ring (Bi) Inch 1.338 in, Bolt Hole Center to Center (e) Matric 70 mm, Bolt Hole Center to Center (e) Inch 2.755 in, Flange width (a) Matric 95 mm Flange width (a) Inch 3.74 in, Overall Height (Z) Matric 35.7 mm, Overall Height (Z) Inch 1.405 in, Dynamic Load Rating Cr 14000 N, Static Load Rating Cor 7800 N, Limiting Speed 7000 r/min, Clearance Normal, Bearing Sealing type Contact standard, Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball Bearing Material Gcr15, Housing Material H200 Cast Iron, Locking Type Set Screws, Weight 0.710 KG.
jack
Reviewed in Canada on February 7, 2024
fabriquer souffleuse a neige
Brandon Best
Reviewed in Canada on February 1, 2024
Bore is not 7/8”, and is actually 31/32”. This causes significant mis-alignment if you were using a 7/8” shaft. When it arrived, bearings were not pressed into their housing properly.
Recommended Products
$25.99
$ 10 .99 $10.99