Your cart is empty.
Your cart is empty.This UCP PILLOW BLOCK MOUNTED BEARING consists of an INSERT BEARING and a CAST IRON housing. The INSERT BEARING has Triple-Lip Seal: Unmatched protection in highly contaminated environments. Ensures significant bearing lifespan in severe dust, sand, slurry, and water. Bearing is Pre-Lubricated with High-Quality Grease, ideal for use in High and Low-temperature settings. Has a Set Screw Lock on its surface for securing the shaft. The PILLOW BLOCK can be mounted on levelled surfaces using the Two Bolt Holes. Grease Fitting Offset on top to Relubricate the bearing. - Specification: Item UCP202-10R3, Series UCP200, Bearing Number UC202-10R3, Housing Number P203, Bearing Bore Diameter Metric 15.875 mm, Bearing Bore Diameter Inch 5/8 in, Bearing Width Inner Ring Matric 31.00 mm, Bearing Width Inner Ring Inch 1.220 in, Bolt Size 3/8 in, Number of Bolts 2, Bolt Hole Center to Center (e) Matric 95 mm, Bolt Hole Center to Center (e) Inch3.74 in, Overall Length (a) Matric 127 mm, Overall Length (a) Inch 5.00 in, Overall Height (w) Matric 60 mm, Overall Height (w) Inch 2.362 in, Overall Width (b) Matric 38 mm, Overall Width (b) Inch 1.496 in, Mounting Surface to Shaft Center (h) Matric 30.2 mm, Mounting Surface to Shaft Center (h) Inch 1.189 in, Dynamic Load Rating Cr 9560 N, Static Load Rating Cor 4750 N, Limiting Speed 9500 r/min, Clearance Normal, Bearing Sealing type R3 Triple-Lip Seal, Lubrication Type Grease Shell RL2, Lubrication Temperature -20°C to +160°C, Rolling Element Indicator Ball, Bearing Material Gcr15, Housing Material H200 Cast Iron, Locking Type Set Screws, Weight 0.600 KG.
