Your cart is empty.
Your cart is empty.Product Description
MAX CLR A/B For Coating & Glue For Food Contact Applications
MAX CLR A/B is a two-component resin system formulated to create a hermetic barrier to prevent foodstuff from absorbing into porous materials. It is suitable for wood, metals, & plastics substrates. It cures clear, tough & exhibits resistance to alcoholic and hot beverages.
MAX CLR Coated Restaurant Tables and Bar Tops
Red Wood Cedar Restaurant Tabletop
Custom commercial restaurant table with MAX CLR sealer and topcoat demonstrates durability from repeated use, sanitizing and cleaning.
Red Wood Cedar Restaurant Tabletop
Coated tables remains aesthetically pleasing after many years of use in a commercial environment.
Red Wood Cedar Restaurant Tabletop
Custom commercial restaurant table with MAX CLR sealer and topcoat demonstrates durability from repeated use, sanitizing and cleaning.
Red Wood Cedar Bar Top Coating
MAX CLR bar top coating demonstrates toughness and endures daily wear and repeated cleaning in a busy commercial restaurant.
MAX CLR Available Kit Sizes
1.5 Gallon Kit -196 Fluid Ounces
Copy And Paste The To The To Search Bar To locate The Amzon Listing: B01J113HWG
Typical Coverage At 0.010 Coating Thickness: 240 Square Feet
3/4 Gallon Kit -96 Fluid Ounces
Copy And Paste The To The To Search Bar To locate The Amzon Listing: B01J166GM4
Typical Coverage At 0.010 Coating Thickness: 120 Square Feet
Quart + Pint Kit -48 Fluid Ounces
Copy And Paste The To The To Search Bar To locate The Amzon Listing: B01J16MYSE
Typical Coverage At 0.010 Coating Thickness: 60 Square Feet
MAX CLR THIXO 48 Fluid Ounce Kit
Copy And Paste The To The To Search Bar To locate The Amzon Listing: B082TKH6BX
Typical Coverage At 0.010 Coating Thickness: 60 Square Feet
MAX CLR THIXO -Thickened 4 Vertical Application With Less Runs & Drips, Wood Turned Cups Bowls Mugs & 3D Printed Plastics
Charles Wesley
Reviewed in the United States on February 25, 2025
This is the easiest rhythm I’ve ever used it never fails to set up in about 8 to 10 hours with no bubbles!
Sandi
Reviewed in the United States on February 9, 2022
Easy to work with.
CRAIG MARTIN
Reviewed in the United States on February 16, 2022
Other than the cost of epoxy in general(all good brands) this product worked great. I am a beginner "epoxy'er", made a small river table / end table and it turned out great. Just follow the instructions to a teeand most everyone can work with epoxy.
Karen
Reviewed in the United States on May 8, 2019
No matter what I do I can not get it to mix right and I have watched the video many times.. it always separates
fjoseph vigil
Reviewed in the United States on February 7, 2018
It did as it was supposed to do! I am a first time user and as an artist mixing colors with the resin the end result is spectacular! Couldn't be more excited and have already began more projects.
william manders
Reviewed in the United States on June 17, 2017
I am using this to coat wooden coffee mugs I made and it works better than I expected ! Also started using it to coat several different hobby projects for my wife !
Jltl
Reviewed in Canada on May 9, 2017
Its a bit milky when it dries. Not for craft use. For Resin crafts use something else as this is not a truly clear item.
M. Vanderhoven
Reviewed in the United States on December 8, 2016
I will keep using this until I find an alternative epoxy resin that is safe for food contact. It works fine, and the final project I did looks great, but it took weeks of trial and error to deal with bubbles. I am using this on wood, and that is the worst for bubbles. I tried everything suggested in the instructions, and have spent some time on the internet looking at videos for tricks and tips. Here's what I tried:(1) I coated the wood with a thin layer of resin first. After the first coat dried, I had bubbles on that coat, and when it dried, there were hard bubbles and pockmarks on the surface. I sanded them down and I applied another layer, and that helped a lot, but I still got lots of bubbles.(2) I blew air at the surface. That helps some, but after a while, the resin starts to harden, and blowing air on the surface can leave ripples and an uneven layer. I was able to get rid of all the bubbles, but when I come back to check on it hours later, more bubbles had appeared. A lot more bubbles. The resin at that point was nearly completely hardened, so the bubbles where solidified. I had to wait for the resin to be completely cured, and then used a very small router but to to rout out individual bubbles, and then do another coating.(3) The propane torch trick. The recommendation is to VERY QUICKLY sweep a flame over the bubbles. The technique is very tricky, and very time consuming. After I ran out of fuel, I tried using a lighter instead of a torch, and that was easier (and less prone to scorching). It's tiring, but effective.To sum it up: I'm happy with the look of my project, but it was a real pain in the ass to use, and it took me a ridiculous amount of time time finish the project. . Like I said, I'll keep using it until I find a better food-safe alternative.
dennis r. friedel
Reviewed in the United States on December 3, 2016
This stuff may set up faster than you expect. Be prepared to work fast! The product looks great on my wood slabs!
Recommended Products
$37.77
$ 18 .99 $18.99