Your cart is empty.
Your cart is empty.MaxPower's 561139B includes 3 blades for many 60 in. cut Exmark mowers. These blades replace OEM #'s 103-6403 and 103-6403-S. Fits Exmark models CT, Front Runner, Laser HP, Laser Z, Laser Z E, Laser Z S, Laser Z X, Laser Z XP, Laser Z XS, Phaser, Pioneer, Quest, SP, Turf Ranger, Ultra Cut and Vantage. Each blade measures 20-1/2 in. L and 2-1/2 in. W with a 15/16 in. center hole. Check your owner's manual to verify that the OEM number of the blade being replaced matches one of the OEM numbers provided for this item. Maxpower blades are manufactured to meet or exceed OEM specifications. Proudly made in the USA.
Tony D
Reviewed in the United States on March 12, 2025
Great set of blades! Hold a good sharp edge!! Great value!! Fit the 60” exmark perfectly!!
Jace
Reviewed in the United States on August 1, 2024
Fit perfect. Ordering a 2nd set. We use them on our Toro Z Master 3000 zero turn.
Jevan Chamberlain
Reviewed in the United States on July 24, 2024
Same fit and thickness as the original exmark blades. Made of good material, have held up well over several mows now. Much better value than the stock blades. Easy to install and look and perform just as good as the originals. Sharp out of the box and whatever material they use holds a good edge.
Phillip M. Porter, Jr.
Reviewed in the United States on December 4, 2024
Beefy and holds up to accidental small stump strikes
Customer
Reviewed in the United States on November 14, 2024
Fit the Laazr-Z as expected.
clickhere
Reviewed in the United States on September 5, 2023
We mow about 12 acres so have the commercial eXmark. Our dealer sells a similar blade for twice the price so I tried these, works great, so bought 2 more sets for next season. They cut better when the grass has some moisture, not as good in dry weather, but I think that's probably true for most blades. We got the zero turn because we mow through a Pecan grove and landscaped border with 100 bushes and make constant turns. Other blades have left some streaks but these do great. Very pleased with the performance and the price.
MSHenry
Reviewed in the United States on June 22, 2023
This after market product works great. Easy to change dull blades. These bolt right on and are better than the original blades that came on my mower.
Stephen P. Huval
Reviewed in the United States on September 9, 2020
Update: I've been using these blades for a while. They cause a little bit more vibration than exmark blades but it's not bad. I think the extra vibration is probably from the weight of the thicker blades. They cut good and seem to be holding an edge well. I haven't needed to resharpen. I'd recommend them.Original post: I rated 4 stars because this is a re-branded item. A sticker was covering up the original label. I attached a photo of both label's with the box. This is the info printed on the original label, "Copperhead Mower Blades®, Rotary®, part# 15-11248, Replaces 103-6403, 100% Made in the USA". Purchased from: "sold by Amazon.com Services LLC" Sept. 2020This is the first time I replaced blades on my mower so I purchased an original set of eXmark blades to compare the two products. (Photos with measurements attached)• The hole size, width, and length are identical to the original eXmark brand blades.• The metal is thicker than eXmark. MaxPower almost 1/4", eXmark about 3/16"• The lift is not as wide as eXmark. MaxPower = 1-7/8", eXmark = 2-1/4"• The cut edge is one inch shorter than eXmark. MaxPower = 7-1/2" eXmark 8-1/2"• These weigh more than eXmark. MaxPower = 3.05 lbs., eXmark = 2.65 lbs.I have not tested these blades but they seem pretty good for half the cost of the original eXmark brand.The lawnmower shop told me that older model eXmarks use a different blade. This is the newer size. I have a 2019 Lazer Z e series, 60" deck. Blade# 103-6403
Recommended Products
$48.92
$ 21 .99 $21.99
$42.95
$ 20 .99 $20.99
$69.99
$ 29 .99 $29.99