Your cart is empty.
Your cart is empty.
PRODUCT DESCRIPTION
This is a high quality non-tremolo hardtail bridge with solid plate and saddles for Strats, Teles and other non tremolo guitars that have through body string mounting. 52.5mm(2.07in) string spread.
Supplied with mounting screws and allen key to adjust the saddles.
Weighing in at a nice hefty 108g this high quality chrome bridge should not be mistaken for a cheap pressed steel plate item and will provide a good resonance and sustain.
Each of the six saddle is independently adjustable for intonation and action height so you can get your axe set up exactly as low or high as you like and ensure its in tune right across the fret board. The saddles are shaped to ensure a smooth string path whichever way your guitar is strung.
Between string spacing is 10.5mm(0.41in). Base plate measurement is 76mm(2.99in), wide is 42mm(1.65in).
The great thing about this bridge is that it has string holes at the back of the bridge for conventional stringing and also has them under the saddles for through body stringing. So if you have a breakage o stage you can quickly restring through the front with out having to fiddle about in the low light levels trying to string through the back.
PACKAGE INCLUDE
1 x Bridge
1 x Allen key
5 x Screws
NOTE
Color might be slightly different due to the color calibration of each individual monitor.
Please allow slightly 1-3mm measuring deviation due to manual measurement.
Madcadmium
Reviewed in the United States on August 17, 2024
My new guitar came with an off center bridge and that really bugged me. I chose this new bridge because it is large & I knew I could cover the old holes with this new bridge. It worked perfectly & the strings are nice & aligned now
james b
Reviewed in the United States on May 26, 2024
As a seasoned guitarist, I recently upgraded my guitar with the Metallor Top Load Guitar Bridge Tailpiece Fixed Hardtail Saddle Bridge, and I couldn't be more satisfied with the results.**Easy Installation:** The installation process was a breeze. The package included all the necessary hardware, and the bridge itself was designed for straightforward mounting. Even if you're not a professional guitar technician, you'll find the installation process quick and hassle-free, getting you back to playing in no time.**Great Value for the Money:** One of the most impressive aspects of the Metallor bridge is its excellent value for the money. For a very reasonable price, you get a high-quality bridge that significantly enhances your guitar’s performance and playability. It’s a cost-effective upgrade that delivers professional-grade results without breaking the bank.**Sturdiness:** The build quality of this bridge is outstanding. Made from durable materials, the Metallor bridge provides a solid, stable foundation for your strings. It holds up well under heavy playing and maintains its integrity, ensuring your guitar stays in tune and sounds great over time. The fixed hardtail design also contributes to a more consistent sustain and reliable performance.Overall, the Metallor Top Load Guitar Bridge Tailpiece Fixed Hardtail Saddle Bridge is a fantastic upgrade for any guitarist looking to enhance their instrument. Its easy installation, great value, and robust sturdiness make it a top choice for both amateur and professional players alike. Highly recommended!
Dakman
Reviewed in the United States on February 27, 2024
Nice finish, dimension are spot on. All adjustment screws are good.
Roger
Reviewed in the United States on January 6, 2024
This is a little larger than some of the other similar bridges on Amazon ( check the dimensions in the photos). Comes with all the screws. Looks and fits great.
MFP
Reviewed in the United States on April 20, 2024
Perfect fit on my paranormal Squier Telecaster. Easy install, intonation was spot on. The black colored bridge gives the guitar with the black Jazzmaster pickups a nicer look than with the original chrome bridge. Also changed out the vol. and tone nobs to black.
Paul G.
Reviewed in the United States on August 7, 2023
Installed on a new Stratocaster body without the cutout for the tremolo type bridge. This hardtail bridge will not fit on a standard Strat body with the large cutout for the tremolo bridge.The bridge base is a fairly thick stamped piece of steel sheet but not very flat. I machined the bottom surface of the base flat, to make contact with the guitar body over all of its surface. This makes a more stable bridge when screwed down.Also deburred the openings for the strings and the intonation screws, takes 10 minutes with needle files.The bridge needs to be centered relative to the strings, so measure the position of the neck center where it attaches to the guitar body, and use that measurement to locate the bridge center. Then mark out the positions of the bridge screw holes.Very solid and holds tuning.This is not a beginner project but the bridge is very affordable and is nice for experimenting with.
Ali K
Reviewed in Canada on February 23, 2022
Works great , nice and solid.
Wesley P.
Reviewed in the United States on April 12, 2022
This is advertised as black but they sent me it in silver and I can’t get in contact with anyone about swapping it out.Normally I’d make it work but this is for a guitar where literally all the hardware is black, so it’s rather misleading/disappointing because I’ve gotta jump through hoops just to send this one back,And get the proper color one which also still needs to be reshipped.The quality is about what I expected and is as advertised.Just not the right color.
Octathorpe
Reviewed in the United States on March 4, 2021
This is a standard format top load hard tail bridge. It functions fine but this one has a pretty thin gauge of metal as the base/back of the bridge. All of my other similar bridges have thicker metal and a heavier. This one seems "leaned out". Other than that it serves the purpose. But if your are buying this for your #1 look elsewhere.
Recommended Products
$11.99
$ 5 .99 $5.99