Shopping Cart

Your cart is empty.

Your cart is empty.

MG996R servo 55g sg90 MG90S Motor Metal Gear Torque, Aideepen Digital Servo Motor for Smart Car Robot Boat Helicopter DIY [4-Pack]

Free shipping on orders over $29.99

$15.19

$ 6 .99 $6.99

In Stock
  • The MG996R Servo motor is updated from SG90 and MG90S micro servo motor. Speed, tension and accuracy all increased.
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc.
  • Torque at 0.18sec/60 degree (4.8V no load), 0.15sec/60 degree(6.0V no load). 180° Running Angle. Stable current and voltage will extend the service life of the steering gear.
  • Power Supply: Through External Adapter. Metal gear. Stable and shock proof. Connector wire length 300mm.(PWM 500-2500μs).
  • Application: MG996R Servo for robots, mechanical arms, climbing cars or remote control toys and suitable for most DIY projects.



Product Description

Specification

Model: MG996R Servo
Gear Type: All Metal Gears
Power Supply: Through External Adapter
Maximum angle: 180°
Pulse width range: 500~2500usec
Operating Speed: 0.18sec / 60 degrees (4.8V)
Operating Speed: 0.15sec / 60 degrees (6V)
Torsional moment: 9kg.cm(4.8V)/13kg.cm(6V)
Dimension: 40.5*20*39.5mm/1.59*0.79*1.5 in
Weight: 55g

6-Pack MG996R Servo,Aideepen Full Metal Gear High Speed Torque Servo Digital Servo Motor for Smart Car,Robot,Boat,Helicopter,DIY

Features:

MG996R micro servo motor, updated from SG90 micro servo and MG90S micro servo motor, increase the speed, tension and accuracy.

Application:Aideepen MG996R Servo Good performance digital standard servo, compliant with most standard receiver connector. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys.

Notes:

  • For engine powered airplane and boats, rubber must be used to reduce vibration.
  • Please choose correct model for your application.
  • Torque over-loaded will damage the servo's mechanism.
  • Keep the servo clean and away from dust, corrosive gas and humid air.
servo motor

You may want to know:

  • 1.What is 90 degree 180 degree 270 degree 360 ​​degree steering gear?

A: 90 degree 180 degree 270 degree steering gears can reach 90 degrees 180 degrees 270 degrees respectively, and can control any angle within a large rotation angle; 360 degree steering gear is a continuously rotating steering gear; all the above rudders The machine can rotate in the forward direction.

  • 2.How to wire the steering gear?

A: All of the above are brushless servos, there are three wires.

  • 3. What is the difference between the various types of servos?

A: The servos such as 995 996 are internal chip differences. For most users, the basic performance is not much different. The 996 is an upgraded version of the 995. The 995 is a classic version with a large torque.

  • 4.What is a waterproof steering gear and a reverse steering gear?

A: The waterproof steering gear is waterproof and affects the use of the steering gear, but it cannot work continuously under water; the reverse steering gear rotates in the opposite direction to the general steering gear.

  • 5.Are the mg996r 55g metal gear torque digital servo motor waterproof?

A: Not waterproof,If you need waterproof servo, you can try our 25kg Servo (Asin: B09B2BRMGV)

  • 6. Remote control user and MCU control for steering gear.

A: Because the remote control is a fixed signal pulse width, the 180 degree servo can only reach 90 degrees, and the 270 degree servo can only reach 180 degrees. MCU and other users can adjust the signal

  • 7.Does the servo work with Ar duino?

A: Sure. Our Full metal Gear PWM MG996R servo can be programmed with Ar duino.

  • 8. What kind of robot is suitable for your MG996R Servo?

A: this MG996R servo is suitable for 1:10 models:RC car/Biped Robot / manipulator / remote control vehicle, class 50-90 methanol fixed wing aircraft and 26cc-50cc gasoline fixed wing aircraft model.

  • 9.What is the size of the spline gear on-top of the servo ? How many teeth? Is it a standard size ?

A: Yes, this MG996R servo is standard size,product net weight: 55g, working torque: 13kg/cm,25 teeth.

  • 10.What power supply should I use?and What's PWM range for this MG996R servo motors

A: power supply:3A, 4.8v-6v

0.5ms— 0 degree

1.0ms— 45 degrees

1.5ms— 90 degrees

2.0ms— 135 degrees

2.5ms— 180 degrees

MG996R

mj1234
Reviewed in Canada on March 5, 2025
Motors work great, and the assorted attachments are very useful.
Erasmo Clemente (Venezuela)
Reviewed in the United States on February 22, 2025
 
Tu T.
Reviewed in Canada on July 19, 2024
They came in a box, very nice. At $27.54 for 4 but I will not buy these again, it is over price now.
Chris Thiele
Reviewed in Canada on March 21, 2024
Full range of motion, they may not quite be rated for the full weight that is spec'd, but they function more or less fine. They started to get stressed out when I tried moving a 200g armature, direct drive FYI
daddy deepdish
Reviewed in the United States on December 29, 2024
Heavy but work well. Aways glue your ends for durable usage on wires. Easy to use. Size is as described
Caesar
Reviewed in Canada on November 3, 2024
Not power hungry and good precision for this price. Liked it.
Steve Wambolt
Reviewed in Canada on November 15, 2024
UPDATED: The Servos are amazing, lots of torque. I would buy again.I ordered 2 packs of 6. One pack was misssing 3 servos, and 2 of the remaning ones are not working. The other pack are great all 6 servos function as expected. I would like to have the other pack replaced.
conrad
Reviewed in the United States on September 17, 2023
The servo motors arrived on time. I used two so far in my project and they worked fine.
Wayne D.
Reviewed in the United States on July 25, 2023
Operates as expected. It was nice to have already to go reliable rudder servo on hand when the one in my ship failed. Four pack was reasonably priced which allows for back-up parts.
ad5jo Durkee
Reviewed in the United States on February 2, 2023
I had purchased these for robotics projects. Wasn't sure they were going to work but they are working for me. I've been trying different motor schemes for attaching wheels for robot motion. I used a Raspberry Pi Pico to set the servos to mid position, then cut the potentiometer (pot) tip off, silicone glued the pot shaft in the mid position and pulled out the metal post from the final gear. I retested the mid setting to be sure the pot shaft hadn't turned during the reassembly.
Dino Danger
Reviewed in the United States on May 2, 2022
Best value for price. Servos are perfect and come with a bunch of extras. I'm actually blown away with the quality. Their description is spot on. I installed all 6 in a 1.6m balsa ARF and they work perfectly. Again, I can't believe you can get this many quality servos for this price. Highly recommend this seller and these servos. Thanks!
Tom Gross
Reviewed in the United States on November 25, 2022
Used for a useless box, they 9g servos are too weak.
JeffRoig
Reviewed in the United States on October 18, 2022
I have purchased similar servos in the past and after about 4 hours of use they get hot and in some cases will fail. I have ran this for 8 hours continuous and never did they even get warm or show any signs of failure. I would recommend these servos to anyone. Great product.