Your cart is empty.
Your cart is empty.Product Description
Sturdy microphone boom arm stand with strong springs
Adjustable Angle
The stand arm can be extended 135° front and back and 180° up and down.The position of the 3/8" connector can be adjusted up and down 270° and rotated 360°, and the MIC can be adjusted to face any direction.
Sturdy Boom Arm
The improved load-bearing structure can support the weight of 3.3lb(1.5KG) by default, which is equivalent to the weight of three Bule Yeiti. The reserved adjustment hole can adjust the load-bearing capacity to support 4.4lb, you can refer to the instruction manual for adjustment.
Upgraded Table Clamp
It can support a table up to 2.1"(5.33cm) thickness, turn the screw to secure the mic stand to the table. A EVA pad is added above the clip and a rubber pad is added below to prevent scratches on the desktop.
Compatible for 5/8" interface MIC
For Blue Yeti, Blue Yeti Pro, Blue Yeti X, Blue Snowball, HyperX QuadCast, HyperX QuadCast S, HyperX SoloCast, Shure SM7B, Shure MV7, Fifine K688 AM8, Razer Seiren mini, Razer Seiren X and more.
Compatible for 1/4" interface MIC
For Blue Yeti Nano, Elgato Wave 3, Elgato Wave 1 and more.
Upgraded Clip for Diameter 1.26" to 2.28" MIC
For SAMSON Q2U, AT2020, AT2035, AT2040, NW-700, NW-800, Fifine K669B,MPM-1000 and more.
Kennard KNott
Reviewed in the United States on February 16, 2025
Great product easy setup
Daniel
Reviewed in Canada on January 17, 2025
Highly recommend, the arm is strong and stable while still being adjustable. It's very easy to set up and the bonus pop filter makes it well worth the price. 10/10 would buy again
Duckie of Truth
Reviewed in the United States on September 6, 2024
Duckie of Truth here,Sturdy metal while still being affordable!The clamp supports the weight of my Yeti nano with no problem. So long as it is clamped on a flat surface it won't fall off.Great movement and flexibility!Duckie out!
Matthewos Tesfa
Reviewed in the United States on August 19, 2024
Easy to install, A little bit too big for my desk but it fits great and makes having a mic so much better. Work Great, Feels great, Moves in all direction and you can tighten any joint. Love it!
Beatbumz Musik
Reviewed in the United States on December 9, 2024
Great for the price. Works as it should. I'm pleased with my purchase...
Perry Dollar
Reviewed in Australia on December 4, 2024
A great buy
R. Schwartz
Reviewed in the United States on December 10, 2024
As the title says, for the price, it did improve my quality of life. The two arms only adjust in one direction, but it does swivel. It doesn't look or feel cheap which was nice. Everything is adjustable.I'd recommend measuring what you plan to attach it to to make sure it'll function the way you want it to.
Ed
Reviewed in the United States on November 8, 2024
The stand holds a standard Blue Yeti Microphone with no trouble. It’s able to stay in the place you leave it without it slowly falling down. Very stable
Derek Rene
Reviewed in Canada on November 24, 2024
My old microphone arm broke from normal use, so when I saw this one, I bought it as fast as I could.The pop filter is a great addition! The arm is really stable, sturdy.The microphone compatibility is also great, compatible with ALOT of microphones.Great product.
Aaron
Reviewed in Australia on October 16, 2024
Very well made exactly what I needed :)
Tony Li
Reviewed in Australia on October 13, 2024
it gets the job done, it holds the mic and works fine when you do not move it. However, for 30 AUD, you get what you pay for. There are many annoyances that you will have to deal with. Annoyance 1: dark particles (paint I think) keep falling out of the joint regions of the boom arm. It is not just a little bit, but quite a lot of them. Whenever you bent the joint of the boom arm, do you expect them to fall out. Then you have to get a wet towel and wipe them off of your desk. Annoyance 2: It makes sounds whenever you move it, the makes these snappy spring sounds and the boom arm feels like it's going to break. Annoyance 3: the overall build is not very sturdy. Sure it holds the microphone well enough, however, it is a bit wobbly when you move it, but if you were to simply leave it there, it gets the job done pretty well.
龙猫
Reviewed in the United States on April 28, 2024
This is a great deal. It firmly holds my mic (I have a Tascam DR07x that I screw with the 1/4" thread). The pop filter is pretty good too. It is a little flimsy though.My main problem is that like with other external spring arms, it can be noisy if you bump the table. I mostly fixed this my making little dampers, but it just makes the arm look a little less fancy. Getting a shock mount also helped.
Grevicci
Reviewed in the United States on November 28, 2023
I was really looking forward to getting my Boom Arm Mic Stand and no sooner than I picked it up today, I went home to set it up. I had hoped that this would fit my brand new teal colored Yeti microphone and I crossed my fingers that I wouldn't have any issues. The final conclusion is that there is only one thing that could MAYBE be easier than setting up this mic arm stand thingy...and that would be to fall off a log! That's right! The instructions were very short and concise and probably took me all of 5 minutes (I'd probably fall of the log faster than 5 minutes) to set it up. Just clamped it to my shelf, screwed in the supplied adapter for my Yeti and then put the little black screen on and voila! That's it. The pictures are of this arm thingy without my Yeti. I found out that my laptop where I installed this arm stand may be too old to handle Audacity and so I tried my Yeti upstairs on my desktop and it works perfectly. However, let me stay on track for this review is for the arm thingy and not the Yeti. It was able to hold my Yeti with absolutely NO problem. It is very sturdy and I can rotate it in many ways. What I ordered did not come with a shock mount (wasn't supposed to anyway) as I really don't need one. I will post a picture later with my Yeti attached to the arm. Good buy for a hands free option for your microphone. Takeaway: If this thing can handle a Yeti it can probably handle pert near any microphone. Sturdy, complete and I think worth the money.
Recommended Products
$89.00
$ 39 .99 $39.99