Your cart is empty.
Your cart is empty.ZEROPLAY Miter Bars are hassle-free, dead-on accurate, and super-simple to use. Build better, more accurate jigs, sleds, and fixtures faster. Your projects will thank you. Create perfectly square crosscut jigs fast. The ZEROPLAY Miter Bar System takes miter bars and table saw sleds to the next level of precision. By using the One-Touch Calibration, you instantly fill the full width of the miter slot for no side-to-side play. You can adjust the bar while its attached to the sled making it easier, faster, and more accurate when moving from machine to machine. Top-down installation lets you keep your sled square to the fence while you secure the ZEROPLAY Miter Bar for a hassle-free setup and precision cuts. Fits any standard 3/4” x 3/8” T-Track Miter Slots, ShopSmith, and General 350 Tracks. Use two ZEROPLAY Miter Bars in tandem to create long sleds and jigs. Handle larger materials safer and more accurately. Includes ZEROPLAY Miter Stop, a reliable and precise hold-down anchors for table saw tops and miter T-tracks. Build custom hold-downs for T-TRACK miter slots. Perfect for accurate repeat cuts for sliding table saw sleds. A must-have for clamping, slotting, stopping, and more. Use for point A and B stops for slotting. Locks woodworking jigs in position. Fits any standard 3/4” x 3/8” T-Track Miter Slots, ShopSmith and General 350 Tracks. No slop, side-to-side play or seasonal warping Top-down installation for easy and fast mounting to jigs, fixtures and sleds Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks Includes 2 ZEROPLAY miter bars, 2 ZEROPLAY miter stops and cross cut jig plans
Happy Pilgrim
Reviewed in the United States on January 23, 2025
Using as the basis for a miter sled on my table saw. Easy to set precisely to the width of the slot. The two stop blocks are easy to position and lock. Nice 2-pack.
Mr D.
Reviewed in the United States on July 11, 2024
Perfect addition to the tool shop… no need for making your own, fit Dewalt table saw with no issues..
James Resoldier
Reviewed in the United States on March 12, 2024
I am very happy with the ability to adjust these from above my crosscut sled, rather than having to remove the sled, make adjustments and then try again again. The adjustment is very sensitive though, and you have to be very careful that you don’t let it slip and jam before you tighten down the set screws.
Joanne
Reviewed in Canada on December 6, 2024
He uses it alot with no complaints
Vickey R
Reviewed in the United States on November 20, 2024
or even miter bars made from HDPE plastic (still better than wood) as these are easily adjustable to fit any standard miter slot. The material these are made from is low friction and wear resistant.The only "downside" one might find/consider is their short length. You can buy aluminum adjustable miter bars in much longer lengths, which may/may not be more suitable for your needs. Microjig products in general I've found to be well thought out, versatile and good quality for the price.
Onix1962
Reviewed in Canada on November 18, 2024
making a crosscut sled with these zero play bar is easy.No worries about expansion of the sliders.
brian
Reviewed in the United States on November 17, 2024
It's cool and all but good lord this is over priced. Doesn't work as well as I thought either. It is universal to an extent tiny plastic no rollers in front of back. It's cool but I feel this thing is twice as much as it should be so sorry x2 star for outrageous price 🤷.
Mrs. Green
Reviewed in the United States on June 20, 2023
I purchased these for the large sled to offer plans for...however, unless you have an extension on your table and you follow the plans, you will get a slight wiggle right about when the cut is completed at the fence line, keep in mind it is a heavy sled. I made the jig primarily for box joints, and that slight wiggle will affect the joint for sure.If I would have known this, I would have adjusted the guide a few inches to the back side of the jig and it probably would have solved the issue. I will know have to plug the holes and reinstall it.They should consider making two size options, a 19" +- rail would be perfect for the sled size they advertise. Other than that, they seem like they are well designed and easy to install, direction where easy to follow...but what the video first...
Tony
Reviewed in the United States on March 22, 2023
I love these Zeroplay Miter Bars unfortunately they do not fit my saw, I have a Craftsman 10" Table saw and they have the strangest MITRE Slots. But I am going to save these for when I get my new saw which will have more standard features.
Peter Maurier
Reviewed in Australia on November 5, 2023
This is an excellent product which makes the building of jigs easy and very accurate.
Jeff H
Reviewed in the United States on October 4, 2023
They were easy to use. No more sloppy play like the slide that came with the saw. I didn’t use the stops, but they also look easy too install if needed.
Mr.N.P.White
Reviewed in the United Kingdom on April 10, 2023
Another excellent product from Microjig
Recommended Products
