Your cart is empty.
Your cart is empty.Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4 Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. Made in USA by Micro Swiss
HuesosAd
Reviewed in Mexico on September 18, 2024
Después de 15 impresiones ya se desgastó. Son mejores la de acero endurecido.
M. Vogt
Reviewed in Germany on June 3, 2024
Leider nicht kompatibel mit Micro Swiss Flow Tech da zu kurzDas soll nicht heißen, daß diese Düse schlecht ist da ich kein Urteil zur Qualität abgeben kann.
ace l. nutt
Reviewed in the United States on May 11, 2024
Not compatible with k1 max stuck in machine had to use pliers to remove
Bryan M.
Reviewed in the United States on March 5, 2024
I recently upgraded my Creality K1 3D printer with the Micro Swiss Brass Plated Wear Resistant Nozzle, and I couldn't be more impressed with the results. This nozzle has significantly improved the precision and consistency of my 3D prints, making it a worthwhile investment for any serious enthusiast or professional.The brass plating offers excellent wear resistance, ensuring that the nozzle maintains its quality and performance over time. I've noticed a considerable reduction in nozzle wear compared to the stock nozzle, resulting in cleaner and more accurate prints with every use.One of the standout features of this nozzle is its exceptional heat conductivity. The brass material allows for efficient heat transfer, which helps prevent filament from sticking and ensures smoother extrusion. This has resulted in fewer instances of clogging and improved overall print reliability.Installation was a breeze, thanks to the nozzle's compatibility with the Creality K1. It fit perfectly without any modifications required, and I was up and running in no time. The nozzle's precision engineering is evident from the moment you start printing, with consistent flow rates and layer adhesion across all my prints.Another benefit of this nozzle is its versatility. Whether I'm printing with PLA, ABS, PETG, or any other filament type, the Micro Swiss Brass Plated Nozzle delivers exceptional results every time. It's become an essential part of my 3D printing setup, and I wouldn't hesitate to recommend it to fellow enthusiasts or professionals looking to elevate their printing capabilities.In conclusion, if you're looking to enhance the performance and reliability of your Creality K1 3D printer, look no further than the Micro Swiss Brass Plated Wear Resistant Nozzle. With its exceptional wear resistance, heat conductivity, and precision engineering, it's a must-have upgrade for achieving high-quality prints consistently. Five stars without a doubt!
William Jones
Reviewed in the United States on January 7, 2024
Fitted this to my V6 Volcano with just minor adjustments. It's a great nozzle, just wish I would've gotten my standard printing size of .6. Not sure how long the .4 would resist clogging with CF or wood filled, but should be great for other abrasives like glow. Microswiss products never disappoint.
Loren
Reviewed in Italy on January 31, 2024
Ottimo come tutti i prodotti Micro Swiss
Daniel Blackburn
Reviewed in the United States on January 3, 2024
These Micro Swiss nozzles are great. I'm actually using this nozzle with an SV-06 plus. With a little adjustment of the heat block this nozzle has been working great in my printer.
Frederic Bergeron
Reviewed in Canada on April 25, 2024
As described. Works awesome!
Piero
Reviewed in Germany on April 23, 2024
Alles ok top Qualität gute Düse
Alastorr
Reviewed in the United States on December 6, 2023
I love this nozzle in my k1 max after a few test prints using abs/ASA/PETG they work great, quality is fantastic, the best part is the flow and heating time they take no time to heat up and they hold heat really well running these forced me to lower my hotend temps by about 5-10c depending on the material and the flow went up, I also plan to get another one of these for my sv06 as the nozzles are the same as I use the plus print head,
Chris Harmon
Reviewed in the United States on December 4, 2023
Just received my K1 MAX today and as luck would have it this nozzle showed up at same time. Installation went smooth once I got past the silicon sock, I also had to remove the lidar sensor to pop the hood on the print head. Seems to be printing well but be aware the tip is a little longer so you will have to re-home right away. The nozzle offset remained the same after re-establishing home.
Trey Wentz
Reviewed in the United States on December 26, 2023
I used this until I upgraded their FlowTech hotend (which I can HIGHLY recommend!). As Usual, Micro Swiss is delivering a higher quality product than OEM that is not crazy expensive in price.
pmoy
Reviewed in the United States on December 21, 2023
This nozzle works flawlessly on my Creality K1. But I really can’t tell much difference between it and the stock nozzle. Maybe the print quality is slightly better, but not worth more than double the cost. Just stick with the stock nozzle if you’re not having problems.
Recommended Products
$77.41
$ 30 .99 $30.99
$24.99
$ 10 .99 $10.99