Your cart is empty.
Your cart is empty.Product Description
MidTen bipod compatible with m-rail system can be attached to the rail directly, no adapter needed, easy to install.
Step 1
Rotate the nuts to match the grooves. It is suggested that the flat surface of the nut should be parallel to the top of the stud.
Step 2
Align the nuts with the rail slot and snap it into place.
Step 3
Tighten with the hex wrench, and it shows the T-nuts are locked properly.
Non-slip Rubber Feet Pads
Non-slip rubber feet pads can be used on different surfaces to keep the rifle aiming steadily.
NS
Reviewed in Canada on February 6, 2025
For the price it seems to be of good quality-fit and finish is great, giving it 4 stars as I haven’t used it yet!
Steven & Peggy Evanoika
Reviewed in the United States on February 25, 2025
Work really well
Dwayne
Reviewed in the United States on February 15, 2025
Was super pleased with this bipod set. The Mlock design worked well with the forend of my custom build competition rifle. The ability to adjust these independently of each other helps when your shooting surface is not level and the ability to lock the adjustment between the presets by use of the thumbscrew makes them all the more productive in competition. These will definitely be “on the board” for my next custom rifle and as a seasoned competitive shooter I recommend them highly.
Joseph S.
Reviewed in the United States on February 13, 2025
Literally the entire thing is plastic with the exception of the bottom most piece and the hardware. The price is right for the product but this is more of a toy and not a serious piece of kit. It's adequate for airsoft or Halloween
Customer
Reviewed in the United States on January 7, 2025
Easy to install and work very well
Hunter
Reviewed in Canada on January 18, 2025
Seems to work perfectly for my needs attached to my air rifle and works good I may buy another soon.easy to use and attach. Thanks
Hussain
Reviewed in Canada on July 27, 2024
It’s all plastic. Only screws and springs are metal, I’m planning to use it on pcp air rifle which is recoil-free so don’t expect too much tension on the bipod but would not recommend this bipod for high calibre guns, the recoil will likely shear off the M-lok connectors. It’s shame they don’t do same design in full metal, I would be happy to pay twice this price for one made of metal.
Brant Inglis
Reviewed in the United States on July 20, 2024
The design is sound, however the construction is very poor. The main m-lock mounts are made of a non-reinforced plastic that cracked while mounting! The crack formed from the flat head hardware acting like a wedge in the countersunk hole. It was installed with a wheeler fat wrench set to 15inch pounds. A button head screw in a flat bottom recess would be a better execution, or make the bases out of aluminum. Which I may end up doing as the leg themselves feel fairly sturdy with a good positive action on all the adjustments.These would be good for entry level airsoft, or other uses, but should not be used to support a real firearm as they’ll likely fail under recoil.
Mike&Ally
Reviewed in the United States on March 30, 2024
This bipod is everything I hoped it would be. After doing some research on the different mounting styles, I decided to try these out as they would give me a slightly wider stance which in turn does result in a much more stable setup. Being that they also can swivel 180 degrees, it makes it nice so that when I'm not using them, I can choose to have them in the "up" position either facing forward (like the picture) or backwards out of the way. It is also really nice that the drop down foot can extend independently on either side so when you are pew pewing on uneven ground it is still just as stable as if it were flat.From a long-term deer hunter, this product is a must for anyone finding it difficult to brace yourself and stabilize your nerves when that big buck walks out.
Adam Hanna
Reviewed in Canada on February 18, 2024
Made from strong plastic. The m lok mount works perfect!
Tyler Burton
Reviewed in the United States on December 3, 2024
These bipods for (m-lock) are plastic. They function well but some features, you’re going to need to tighten some things up. (Not a big deal) these are on my 350 legend hunting ar15. I will likely take them off as they tend to grab everything in the woods. But they were perfect at the range to set my zero on my rifle. All the same they will likely get removed and put in the gun safe if I need to zero my rifle again.
G.Mac
Reviewed in the United States on November 16, 2024
I bought one of these about a month ago and like it so much I bought second one. I was reading the reviews and someone said these were all plastic, not so these are all aluminum only the feet are plastic, I scratched just to make sure. I have three other picatinny bipods that are much wobblier, this one is mounted to and M-loc rail and is much sturdier. These should have no problem handling recoil up to a 3006. If I was jumping out of planes into WW3 I might want one of those $400 jobs on my $10,000 rifle but this looks like it will do the job for anyone on a budget with an M-loc slot on the forend of their gun.
emilio bilan
Reviewed in Canada on October 3, 2024
Very sturdy and stable. I have it on my 22.
Recommended Products