Your cart is empty.
Your cart is empty.Product Description
Use TitanRF Faraday Fabric Panel to Create an RF Shielding Room or Enclosure
The Mission Darkness TitanRF Faraday Fabric Panel is a 10.66ft x 9ft (96 sq ft) rectangular sheet that can be applied to a wall or used to create a radio frequency (RF) shielding enclosure. The fabric uses a copper and nickel composition to block WiFi (2.4 & 5GHz), Bluetooth, cell signals including 5G networks, GPS, RFID, NFC, and radio signals with an average attenuation of 80dB-100dB from 10MHz to 40Ghz. The fabric is certified to military standards MIL-STD-188-125, ensuring that it shields against high-altitude electromagnetic pulses (HEMPs) and related occurrences. This compliance measure also provides concrete proof to the shielding ability and effectiveness of the fabric. It is primarily used by military and law enforcement forensics investigators to isolate devices, as well as used by civilians for harmful EMF radiation reduction, EMP protection, digital privacy, signal isolation in secure facilities, RF isolation for hardware and software testing, and more.
*Total materials cost to do this yourself = 287 VS *Cost to purchase fully assembled = 350
The panel is constructed out of three 9ft length by 44in width TitanRF Faraday Fabric sheets slightly overlapped and connected using 2.5in width TitanRF Faraday Tape on both the front and back sides. We assembled a full panel to eliminate the hassle of having to connect sheets on your own, for wall coverings, shielding extra-large electronics, and related applications. It can be cut, sewn, glued, or taped to various surfaces for creating faraday tents, cages, or RF shielding enclosures. If using in construction applications, it can be applied directly to a surface, such as a room wall, in between sheets of drywall, over building materials and tent frames, etc. If connecting multiple fabric panels, slightly overlap edges, and use TitanRF Faraday Tape (available in various lengths and widths) to tape together. Once the panel is fully enclosing an electronic device, you can use our faraday testing apps to confirm your design is effectively shielding.
Why It's Difficult to Construct a Panel on Your Own:
- Generally requires two people for assembly
- Large flat and clean environment preferred
- Fabric creases easily
- Conductive tape is difficult to adhere evenly
- *Overall combining multiple fabric sheets can be time consuming and tedious, which is why we constructed a solution for shielding large spaces or items
Vernon Pitts
Reviewed in the United States on May 15, 2022
Most negative reviews are because people do not understand how EMP "works". You can not just shield an item from one side only. Electrical energy travels in all directions. Covering a window is pointless. The electrical energy comes through the walls, ceilings and floors. You literally need to have the item you want to protect to be surrounded completely, otherwise EMP energy will still get to your device. Put your item in a box or bag that can be sealed completely, otherwise you will not have complete protection. Kind of like having flour in a bowl with no lid and then being surprised that it gets wet when you submerge the bowl in water...That is how it works.
Anonymously
Reviewed in the United States on March 23, 2021
Does not block anything to the point it says it does. Not worth the money!!
Juan De La Torre Garcia
Reviewed in the United States on February 21, 2021
does not block rf I work in cell towers we need to block rf to test this does not do anything
Kay SANDERS
Reviewed in the United States on February 20, 2021
Satisfactory for our use.
Anna
Reviewed in the United States on January 20, 2021
We lined a box an it was relatively easy. It is the right thickness as a liner. It is attractive also.We have a meter on order to test RF shielding and hope it will shield much more. We were able to do more with fabric than we thought we would.
Chris W.
Reviewed in the United States on December 24, 2020
I do not believe in most apocalypse scenarios but an EMP from the sun is one that is always a possibility. On July 23, 2012 a solar flare just missed the earth. This would have had the ability to cause trillions of dollars in damage if it had hit. If the flare had happened a week earlier we would have been directly in the line of the flare and we would still be picking up the pieces. The amount of damage to our electrical infrastructure would have taken many years to get back up and running. Having some way to protect your electronics is more important then ever before. This fabric is more important then ever.You get a 11 by 9 piece of faraday fabric. This is able to protect a lot of electronics and you can make a lot of protection bags or you could line something and use that. You could line a trashcan and just put things into it. You might think this is silly but the solar flare isn't a matter of if, it is a matter of when. 150 years ago something called the Carrington Event if you want to learn more. If that event had happened now I wouldn't be writing this review.This fabric works. I checked it with an EMF reader and it blocked the energy from a problem area I have in my house. I can not figure where the energy is coming from and it is pretty high. This fabric stopped it in its tracks. If you are in any way, shape or form looking for something like this just get it. It will give you a piece of mind and your electronics will be safe. Yes, I know even if your stuff works you might not be able to get on the net, you will however be able to use them and use the things you have saved. I have hundreds of books on my Kindle and it would be horrible to lose them as well as the movies I have downloaded.
IMO
Reviewed in the United States on December 19, 2020
I received this product for free in exchange for my honest opinion. I have priced this type of fabric before and not purchased it because of the high price. This product is the highest price I've seen, so I don't know if it is worth it. But it does work to block signals. It is a very large piece, actually 3 pieces preattached. But it was exactly what I needed for my purposes. The signal blocking though, is the key feature, which it does. As far as the price goes, only you can decide if it is worth it.
Monica
Reviewed in the United States on November 17, 2020
Great value helps to block out emfs
Recommended Products