Your cart is empty.
Your cart is empty.Product Description
Extract the Old Fluid
Connect air compressor to brake bleeder valve. Insert the hose into the reservoir and extract all the old brake fluid from the master cylinder.
Injecting New Fluid
Fill the filling bottle with new brake fluid and attach it to the master cylinder reservoir. Keep the reservoir filled to avoid air entering.
Brake Exhaust
Remove brake screw cap, connect hose exhaust valve and brake caliper. Use wrench to loosen exhaust valve screw, pull down trigger, and start exhaust.
Brake Fluid Clear Stop
Stop when brake fluid color clears, tighten bleeder screw, remove rubber adapter, replace dust cap. Repeat on other three wheels
Elvin Leon
Reviewed in the United States on February 25, 2025
Perfect to bleed
Timothy L. Harvey
Reviewed in the United States on February 17, 2025
Works great works perfect when you are your own mechanic and by yourself life saver..
Jimmy
Reviewed in the United States on April 3, 2025
Works well but requires a high cfm compressor to get maximum efficiency.
Bosifa
Reviewed in the United States on September 2, 2024
2 strikes: No manual/directions in the box. Also, doesn’t fit a Toyota Tundra brake fluid reservoir.
M&G
Reviewed in the United States on September 10, 2024
Was surprised how easy it was to change the brake fluid on the Toyota Venza. It took a little over an hour to complete the job. Really liked the fluid dispensor. It made the job a lot easier not having to get up every few minutes to refill the resorvoir. I recommend watching a video review before using it to familiarize yourself with the process.There was some bubbling in the line when it started pulling out the old fluid, but it seemed to subside once all the old fluid was gone. It has already paid for itself. That was over 4 months ago that I completed the job. The brakes continue to feel better.
Douglas York
Reviewed in the United States on July 26, 2024
Love it works great and quick delivery
Robert cowles
Reviewed in the United States on July 19, 2024
This thing leaks everywhere. The hamster bottle does not hold the vacuum so you pour all your fluid on the ground. If you’re not watching in the kettle, I put a real vacuum pump on kettle and it didn’t work either. It doesn’t work. I would never recommend this to anyone.
Tony
Reviewed in the United States on July 15, 2024
I use this for changing brake fluid and bleeding brake brakes. It does a fantastic job of removing air from brake lines. For this to work properly you need to put pipe dope around the calipers bleed screw or you will draw air around the threads, . This is no fault of the bleeder vacuum pump. I use Harvey pipe dope and don’t be afraid to to put it on heavy. I will purchase again if this pump fails someday.
Recommended Products