Your cart is empty.
Your cart is empty.Combines wrench and bleeder valve into one convenient and compact tool. Fits most 8 millimeter bleeder nipples. Compact size for tight spaces.
william schultz
Reviewed in the United States on August 31, 2024
it made life easier when bleeding the brakes. definitely well worth the money
Dad Bod Incorporated
Reviewed in the United States on July 10, 2024
I ended up bleeding my brakes the old fashioned way. I tried this waste of money and was sucking air where it connects to the bleeder valve. I tried it open because it says it had a check valve that only allows one way flow. I tried pumping up the master cylinder, holding it, then opening the valve with this attached. Every way I tried it was still sucking air so I set it aside and did it normally. Guess what? Bled beautifully, no air bubbles, and not having to constantly refill my reservoir. The tool sounds good but doesn’t work like advertised. Save your money.
richard hanon
Reviewed in Canada on March 8, 2024
fonctionne tres bien
Robby
Reviewed in the United States on March 28, 2024
small, and nice to use, very helpful
isotopegeochemist
Reviewed in the United States on July 8, 2023
Socket too small for rear brakes. I have a 2019 Ducati Monster, bled the front brakes with it, no problem. But socket too short for rear brake
Harold Shim
Reviewed in Canada on October 27, 2023
Works great. Keeps the spillage down to a minimum
md
Reviewed in Germany on November 6, 2021
Great too for quick brake bleeding - good in the track toolbox. Its not entirely spill free, but mostly.
Steven
Reviewed in the United States on April 19, 2021
I left my review about this product but am now changing it from 1 to 5 stars. I'll make the assumption that the first was a fluke and I can tangibly say this based on other Motion pro products have all been steller. This one made it a little easier of a process (less messy) to do my brakes. I did appreciate the compact nature of the device. I would give it 4 stars but their speedy and great customer service made up for what the product lacks. What it does lack however is the hose is a we bit short, and the handle I found to be a bit too small. makes it hard to throttle with one hand to do by myself, and still have to get down with it to have good control. overall works great and the first one that came apart they assured me was a fluke, and I do believe them from their other products
Thefoodman52
Reviewed in the United States on July 17, 2020
This tool is absolutely someone needs for EVERY brake job involving a bleed. I'm looking for a 10mm for my car at this point.There's no mess, the incorporated wrench handle on the tool makes opening and closing lightning fast and easy, and the included hose is nice and long to put deep down the neck of your disposal bottles.Brake bleeds made easy, if only I knew about these a year ago!
david genot
Reviewed in France on September 13, 2019
Parfait , simple d’utilisation
Les F.
Reviewed in the United Kingdom on March 17, 2019
Easy to useNo mess
SPENCER MCPHERSON
Reviewed in the United States on September 5, 2013
Works very well. Bled front and rear brakes on my Honda and they are now rock solid.The bleeder was easy to use and the spanner attachment is a great idea.Only negatives are : bleed hose needs to be a little longer, maybe another 6 inches, so it can reach a bottle sitting on the ground.And the "teflon" ? coating on the inside of the bleeder where the nipple sits, is a bit marked after first use.Not sure if this will deteriorate further and cause issues.Overall, a good product.
smith
Reviewed in the United States on May 13, 2013
Not a bad product. I found a couple things when working on my bike though. Now these issues really are bike specific but it is something to consider on other bikes as well. The bike I used it on is a Honda ST1300ABS.The bike has linked brakes and many bleed points because of how the brakes are plumbed. The bike has a very specific process to bleed the brakes and they have to be done in a certain order. In the past I used a MIghty Vac without too many issues other than sucking a reservoir dry a couple times and having to start over.On the bleed points where I could get this tool to connect to I found that it was hard to seat initially but as I used it, the seals seemed to loosen up making it easier to use. The problem is that there was one point where the calliper is too close to the fork to get on the fitting. The options were to pull the calliper and bleed but now you need the wedge something between the pads when you work the lever or go back to the mighty vac. One of the other bleed points requires removing a calliper and rotating up to bleed. I had to use wooden shims for installing a window or door in a house to shim the pads back so they wouldn't close up. The rest worked well. I then tried to bleed the hydraulic clutch but it was a 10mm where the brakes are 8mm.In the end I will keep it but because I needed two sizes and the issue with one of the bleed points I ordered the regular Motion Pro Bleeder and will likely just use that one from now on. The 8mm one is fine where you can get it on but the tradional one is more versatile.
Recommended Products
