Your cart is empty.
Your cart is empty.Product Description
Self-introduction
Hello, this is me.
This is a great way to your dirt bike.Made from high-strength aluminum, it's lightweight, easy to handle, and very durable.It's portable in design and features a ramp, making it easy to load your bike onto the carrier.
- Easy assembly；
- Motorcycle fixing device (to prevent shaking)；
- Loading ramp;
- High-strength aluminum material；
- Surface polishing (protection of tyres)
Strong Yet Lightweight Design
The motorcycle carrier is made of high-quality aluminum material, which is light in weight and not easy to rust. It is easy to carry and can bear your bike. The surface of the product is also specially treated to better protect the tires of your bike.
Self-storing Ramp with Roll-on/off Design
The hitch-mounted dirt bike carrier has a movable ramp with simple installation, which is easy to load and unload the motorcycle. The connection between the ramp and the carrier is also very close. Don't worry about the disconnection when going up and down the slope.
Excellent Stability
The motorcycle carrier is made for a 2" square receiver (class II, III trailer hitch); Multi-load (load from either side), it can work with a wide variety of vehicles. It also has a wheel chock, which further increases the stability of the motorcycle on the frame and makes your motorcycle difficult to tilt during transportation.
This is my figure:
- Load limit: 400 pounds;
- Loading ramp: 45.47"(L) x 6.69"(W) x 1.77"(H);
- Carrier overall dimensions:75.20"(L) x 7.48"(W) x 2.95"(H)
Reminder：
Trailer hitch pin not included
Bria
Reviewed in the United States on February 22, 2025
Worked exactly what I needed it for. Loading and unloading is easy. Build quality is good. All parts were in the box with easy to follow instructions. I use it for my Vespa Lx 150. Made it from NY to Ohio without an issue
Barry McCormack
Reviewed in the United States on July 7, 2024
Assembly was straightforward. Missing one nut for the ramp locator, but a quick trip to HD took care of that.
Conrad S.
Reviewed in the United States on June 20, 2024
Sturdy, well built, would recommend.I need another anti-rattle bracket that came with this unit. Please contact me or let me know how to contact you.
Travis
Reviewed in the United States on March 22, 2024
First thing I noticed right out of the box pieces looked like they’ve been dropped or abused but the box was fully intact so it must have happened at the factory with poor quality control, I read other reviews about missing hardware or bad instructions I will say that was not the case, all hardware was neat and organized and instructions were clear and easy to follow, one this is the front tire hoop is small and poorly located, I will need to cut and extend that to fit around a 20in dirt bike tire, all in all it seems like an ok product just gotta clean up some sharp edges where it was damaged before shipping
Tracy H.
Reviewed in the United States on August 22, 2023
As a Single Woman, I wanted a sturdy ramp to haul my 50cc scooter along on camping trips with my van. The ramp and strip that the bike sits on are not smooth. It’s got a 2 inch pc of aluminum every maybe 6 inches or so making it IMPOSSIBLE for me to do myself.The ramp itself bent as my Son and I were pushing it up.The instructions were good putting it together but this is t the best quality and it doesn’t help me if I have to have help to get my scooter on it.Not sure how I’ll send it back as the box was a complete shamble when it hot here.Very disappointing
Villager
Reviewed in the United States on August 18, 2023
So easy to load an E-Bike on with the long ramp. I also put a mountain bike on the ramp when in transit. I used a length of steel and bolted it to the side of the ramp to strengthen it for the mountain bike. Also like the cradle for the front tire of the E-Bike. If it for some reason it gets in your way, take it off. Impressed with sturdiness of the carrier. Instead of the anti-rattle device that comes with it, I just used a simple u-bolt type device that cost me $9.
jperalta
Reviewed in the United States on December 2, 2023
Purchased it to haul around my e-bike Talaria Sting, item was delivered fairly quick. Assembly was not too difficult had to figure it out myself because the instructions are horrible and the letters are tiny. They used the smallest font in the assembly booklet. I noticed when I was assembling there was a few knicks I had to sand down because they were sharp and would tear up my tires. I doubt it was done through shipping because the box was intact. Like other people complained the ramp holder the bolts and the holes in the ramp don’t line up.Edit: i really do appreciate companies when they try to make things right, when their product is not as expected. They reached out and made offer to make things right I thought it was fair and accepted it. I fixed the issue with the ramp and the holes not lining up, I just enlarged the hole where the twist knob goes to secure the ramp to the carrier with a file and the bolt goes in.with no problem. The nicks nothing a metal file and Jb weld couldn’t fix. Anyway I am planning to use the raptor bedliner spray can to use on the aluminum.
Customer
Reviewed in the United States on November 18, 2023
I looked at a bunch of carriers and went with this one because it was aluminum with steel brackets. The carrier also has support for the front wheel plus a forward tie down rings which most of the other carriers omit.Fed Ex delivered a very best up box that must have been taped up in shipment. I've seen better packaging and the steel parts were scratched and had dinged up the aluminum. There was no real damage so I accepted the delivery and got started on assembly.Before doing anything else I spray painted the scratches in the steel front wheel bracket. While that was drying I discovered there were no directions to go with the jumble of nuts and bolts. I spotted the hardware into groups of same sized components and matched them to the same number of holes in the brackets. It was obvious how assembly should go from looking at the pics on Amazon and I encountered no problems from there on. I slipped the carrier into my truck's hitch and gogured out how the anti rattle bracket was supposed to work and tightened up it's 4 socket head screws with the provided tool. Everything looks good to go and I'm so glad I opted for aluminum rather than going with a heavier steel version.One thing I saw from other reviews were negative comments regarding the hardware. I have no issues with the included hardware and feel it is up to the job. There is plenty of redundancy throughout with multiple bolts securing the same piece. I believe several bolts could fall off without losing the bike and lock nuts are used on every bolt anyway.I would buy this product again.
Recommended Products