Your cart is empty.
Your cart is empty.Product Description
MUGE RACING 1/4in 6mm 2PCS Fuel Line Check Valve,Non Return One Way Check Valve with 4Pcs Universal Adjustable Hose Clamps,Aluminium Silver
The check valve with 4Pcs universal adjustable hose clamp
The check valve with 4Pcs universal adjustable hose clamp,and Different size of One Way Check Valve with different hose clamps.
According to the little arrow on the valve, connect the fuel line. You can use the hose clamps which can make sure the pipes don't drop off.
How to choose a nice size！
- 6mm 1/4" ID hose One Way Non-Return Check Valve
- 8mm 5/16" ID hose One Way Non-Return Check Valve
- 10mm 3/8" ID hose One Way Non-Return Check Valve
- 12mm 1/2" ID hose One Way Non-Return Check Valve
Warm Tips:
Please confirm the inner diameter of your tubing first,According to the inner diameter of the tubing, it is recommended that you choose the same size as the inner diameter of your tubing.
Feature:
- The function of the check valve is to prevent the fuel from returning to the tank and keep it in the pipeline.
- Aluminum alloy check valve and 304 stainless steel hose clamp have good rust and corrosion resistance.
- The barbs on the joint and hose clamp ensure a good seal and tight connection on the hose.
- It is widely used in petroleum gasoline fuel or water pipeline in pipeline system.
jane agnew
Reviewed in Canada on May 8, 2024
I installed on my 57 Chevy and worked great. Thanks Tom
dad
Reviewed in the United States on August 27, 2023
The valve has a small rubber disc that prevents back flow. In my installation the back pressure from the expansion of my hot water tank in my boat pushed the disc through to the inlet side of the unit so I got no hot water.
Randal Menscer
Reviewed in the United States on July 22, 2023
I used this check valve as a check on a fuel line between the tank and lift pump
Randy King
Reviewed in the United States on July 13, 2023
Good parts
ThatOneGuy
Reviewed in the United States on July 7, 2022
Added to a welder to help with priming the fuel line... slows the retraction in the fuel line but doesn't hold
Kaycee barner
Reviewed in the United States on June 20, 2022
Fairguy
Reviewed in the United States on March 18, 2022
Pictures shown 2 check valves with 4 hose clams, but shipped only 3 clams.
Sean Thompson
Reviewed in the United States on February 24, 2022
As said the tubing was extremely hard to get onto the valve, and using them to bleed my breaks, the 1 way valve failed. I had to loop the hose after the valve to prevent air from being sucked back into the caliper. Wasted my money. I should have just double looped some hose and put it down into a cup full of break fluid and saved money. It might be ok for low pressure operations like a 1 way check valve on a gas tank or crank case vent or in a vacuum line.
JD
Reviewed in the United States on January 8, 2022
These things work well and you can use them for a million different things. In my case I combined these with a (4) lengths of 3/16" tubing, (2) of the larger powerade bottles, (2) 2 1/4" x 3/8" neodymium magnets and some epoxy to make my own one man brake bleeding tools. I drilled a hole in the cap that fits the tubing tightly, ran the tubing down to the bottom of the bottle and left about 3" coming out the top. Then I added the one way valve with another 12" tubing on the other side attached with the hose clamps they come with and then just epoxied the magnet on the back of the bottle so they will stay on the rotors even when the bottles are full of liuid.
Recommended Products