Good sheath. Have a Buck folder that fit nicely. Thank You.

Great quality. Little snug at first. But I wear it every day and it took about 4 days to mold to the right shape. Quality leather, and after about a year of wear I don’t have any issues with the tool falling out or anything. Much better than the hard shells and that Velcro one that comes with these.

I can’t say enough good things about this product. I wear it everyday and don’t notice it’s in my waist. It rides low so doesn’t interfere with anything and very sturdy built.

Wear it everyday with my Wave+. Didn't think I could love my Leatherman any more until I started using this case! Great quality and super comfortable when wearing.

I purchased this for my Leatherman Surge and the fit is spot on. It is initially super tight but after leaving it in the holster for a couple days it seems to have loosened up some to where it holds firmly but isn't super difficult to remove. I am debating on wet forming it but don't feel that is completely necessary at this time. It does hold nice and snug to the body which is what I wanted. The leather seems to be of good quality and isn't thin or floppy. If you are a bigger guy with dunlap it will stick you in the side a little. My only complaint is I wish it sat a little lower for this reason. After wearing it for a little bit I have gotten used to it though so it's not a deal breaker for me. I would absolutely buy this again.

The media could not be loaded.

This is hands down the best sheath I have ever had. I carry a leatherman wave and it fits perfectly. Well worth the cost. 10 out of 10 recommend.

This sheath is very well made and the stitching is perfect. I bought this for a Leatherman Wave Plus which fit perfectly. I was concerned that the tool would be hard to remove but the hole in the bottom of the sheath makes it easy to push the tool up. The sheath holds the tool securely with no worries of it falling out. it has the perfect amount of retention. I normally carry my leatherman in a kydex belt sheath that worked fine but constantly would catch on things especially getting in and out of vehicles. This sheath is sleek and low profile. It hugs your waistline and so far, hasn't caught up on anything. I have a Buck 110 that I carry during deer season that I plan on replacing the sheath. EDC will be my 1st stop when I do.

Se ve y se siente de muy buena calidad, cumple con lo que promete, además mabdaron un pequeño llavero de regalo, estoy muy contento con mi compra.

As the title says, you'd be pretty hard pressed to find a better leather sheath. Especially on Amazon. All the others in this price range are made of thin byproduct leather that will tear pretty quickly and will get floppy, loose, and stretch excessively. They are more like the material that leather pen/pencil/EDC wraps are made out of. The leather on this sheath is at least twice as thick and twice as stiff, which can be a pro or a con depending on you. When you get it the slot for your tool will be VERY tight. In order to get it to fit my tool properly (Leatherman Surge Clone) I used a larger multi tool I had and put inside for a couple of days to get it stretch out a bit. Then I put my Surge clone inside of it and left it for a couple of more days. No wit fits perfectly. Even so it will also fit my Wave clone just fine. It's still going to hold your tool pretty tight so you still won't be able to just pull it out by just pulling up on the exposed part of your tool. What you need to do is put your thumb on top of one of the wings that your belt slots through then use the hole at the bottom of the tool slot to push the bottom of your tool up which will release it from the death grip of the sheath. Then you can pull up and get your tool out. As far as comfort on the belt goes, slimmer folk are definitely going to have a better time with this sheath. I'm not obese but I do have a little in the middle and I gotta say that if you have some muffin top bits and it dun laps over your belt this sheath will push into it and not be the most comfortable. Mostly because the entire thing is so stiff. I've been wearing it my self for about a week now and I've gotten used to it. It's great when sitting though. You definitely want it on your side and not on behind you. Sitting with it behind you is not the most comfortable. It does hide pretty well under a shirt with a much lower profile than something like nylon sheath. Something else to note is that it will NOT fit a Gerber MP600. The MP600 is too long and the tip of the pliers on the MP600 sticks out too much for this sheath to be useful for that multitool. If you REALLY want it to fit you have to make sure that the tip of the MP600 pliers goes through the hole at the bottom of the tool slot, but even then it won't hold it as tight as a Leatherman Wave or Surge sized tool. It's a cryin shame because I love my MP600 and I have really worn out it's original sheath. I'll have to buy something else for it, but for my other multi tools this sheath is fantastic. The only way your going to find a sheath as good or better than this is if you spend significantly more money at a bespoke online store.I read another review for this that stated that their dog ate their sheath from Mexico which is why they bought this one and i wanted to say that if you have a dog you'll probably want to keep it away from them lol. I personally don't have a dog but i do a LOT of dog sitting and i can say that dogs LOVE the smell of these sheaths and will try to chew them up so keep this thing safe from you puppers people lol.

Fits well, I have a multi tool I wear for work and I like that it is low profile