Your cart is empty.
Your cart is empty.Product Description
HOW TO UES THE MOULD HOUSING?
STEP 1：ASSEMBLY MOULDING BOX
Align the Part and Secure with Clip to Adjust Size. It Can Be Assembled to Form 3 Sizes of Rectangles And 3 Sizes of Squares By Different Combinations
STEP 2 : SEAL THE BOTTOM
TO AVOID The Leaking of Liquid Silicone, We Recommend You Also Use a Hot Glue Stick to Seal The Bottom.
STEP 3: POURING
Make Sure The Bottom Is Sealed Well, Then You Can Pour The Stirred Silicone Rubber Into The Molds Housing and Wait for It to Fully Cure!
STEP 4: EASY TO DEMOLD
Made of Premium ABS Plastic Material, Which is Durable and Sturdy. Not Easily Deformed or Broken Up, Easy to Clean and Demold With The Smooth Surface.
Fuzzy Logic
Reviewed in the United States on September 20, 2024
The concept of these molds is good, but in practicality, unless you have something which fits precisely into it, it's going to be a waste of molding material. The box only has a limited amount of shapes and sizes you can make from it, and so far I've only found one object I could use it for.If the side walls were half the size it'd be easier to tailor to the correct size.It should be noted that this model of mold box can't be stacked to another because there's only a lip on one side, and it's pretty short in height.The double-sided tape worked fine for me (make sure you really press the box down to get it to adhere. I pressed it only a piece of acrylic sheet).There was a quality control issue in that one of the clips was missing the handles.As far as usage goes, I didn't experience any leaks, and the silicone demolded just fine without using a release agent.Overall, if this is the style of mold box you are seeking, I'd say go with one that can be stacked instead.
Michelle S.
Reviewed in the United States on July 13, 2024
I love all Nicpro products and this mold making housing is made from high quality material that's quick to assemble, comes with strong double sided tape, strong clips and detailed instructions. I've tried other brands, and regretted it immediately! The pieces fit perfect into each other also add in the double sided tape and clips and never worry about leakage again! If you're looking for a high quality product that's priced perfectly, you must try this one.
Jonathan
Reviewed in the United States on June 4, 2024
This worked well and is a good time saving concept for easy assembly and breakdown.
Reem
Reviewed in Saudi Arabia on February 29, 2024
مره ممتازه حبيتها فكت ازمه
Miss Hannah Gregory
Reviewed in the United Kingdom on December 13, 2024
This is a really simple concept that works well for me, I use it for Plaster casting and not for resin but I haven't had any issues with it leaking. Easy to clean. I've more than one set but I wish you could buy extra corners both left and right to make more interesting shapes
Devil Dave & Allie
Reviewed in the United States on November 26, 2024
It doesn't leak out the sides, but it will from the bottom. Use something to seal the bottom seams like putty, hot glue or caulk.
Lisa Culverwell
Reviewed in the United States on November 25, 2024
This was perfect and exactly what we needed! We’re so happy with the shape of our mold.
joelle
Reviewed in Canada on October 14, 2024
Very nice tool. Love that we can use different sizes. Very cool.
ROSANNE D
Reviewed in Canada on April 28, 2024
Just received. Looks like a good and sturdy adjustable mould housing. Cannot comment on performance until I try it. Will edit my post with results and pictures after usage.
R. Turner
Reviewed in the United States on August 8, 2023
I usually make my mold walls with a plastic corrugated board stirps and use a glue gun to seal the bottom. It takes time and is messy but this was so easy! I LOVE IT! The only thing that would make it better is if you offered or included some side wall pieces half the size they are now. I used the whole kit but it was a bit larger than I'd like on 2 sides so if I'd had 2 half pieces it would have been perfect. It's way past time someone made this thank you!
Bozena Cornelius
Reviewed in Australia on July 24, 2023
Used only once and half of silicone oozed out but it’s most likely operators error. I did see it used on YouTube and worked very well.
SSB
Reviewed in the United States on May 24, 2023
I bought this as to make molds for my many resin projects and am so glad I did. Before I was using repurposed dishes to house the molds but it was proving to be not the best of ideas. This mold housing made my life so much easier as it is resizeable to a certain degree and made getting the mold out so much easier. It came with the side pieces and the clips as well as double sided tape to place on the bottom of the side pieces so they stick down and don't allow the liquid to leak out from underneath the mold housing. This was a great investment and I have already gotten so much use out of it and forsee plenty more in the future.
RedXepher82
Reviewed in the United States on November 30, 2022
This is a very simple and easy to use device to make your own resin cast mold if you are a beginner. It is definitely not perfect for it does create a good seal along the edges. The mold unfortunately does not have a tight seal bottom so the resin can actually spill out of the bottom so be aware of that when pouring. Make sure you do this outside and on top of a surface that is easy to remove resin off of. That being said, It is a very basic device. The binder clips provide a good solid seal to help maintain the side. It is customizable so you can make different sizes with the molding. It is pretty easy to peel the sides off of the resin once it has been cured. It is definitely a bit of a learning curve. I found the best results is to pour a foundation first to get a proper bottom so you can keep the resin from spilling out the bottom and ruining the mold but use your best judgment. The plastic edges are very easy to clean up and remove once the resin has cured. I have yet to have issues where it was really stuck to the resin. It may take a little force to take some off but not much. The white is easily yellowed so if you happen to leave this in the sun to cure just be aware of that. I personally do not mind that. It does make a decent mold for what I need. I was able to make a few keycaps and buttons with this. It is not perfect but again it is great for me as a beginner. The instructions are there but it is pretty easy to setup. Overall I think these are solid pieces, they make decent beginner molds, and it is easy to remove. I just wish it had a better base so it did not leak out of the bottom as much. It is a bit of trial and error when working with this.
Recommended Products