Your cart is empty.
Your cart is empty.Product Description
- 2PCS 6 Inch 60W Flush Mount LED Light Pods
- Beam Pattern: Spot & Flood Combo
- Input Voltage: 9-30V DC (fits 12V, 24V vehicles), Color Temperature: Pure White 6000K-6500K
- current consumption: 12V/1.48A, 24V/0.73A, Material: 6063 Aluminum Alloy Profile, High quality Led Chips, PC Lens
Key Features
IP68 Waterproof
IP68 water resistant to withstand any harsh environments and weather conditions
Advanced Chip Techs
Use high quality led chips that features a trusted brightness and a long-lasting lighting performance
Heat dissipation
18pcs Cooling fans and High quality Die-casting Alu housing fast heat-dissipation.
User-friendly Mounting
Comes with paper model to confirm and mark out the exact holes size and mounting position. Be of great help, labor and time saving!
Strictly Test
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Super Bright Spot Flood Combo Light
High quality and employ top-notch Osram led chips
Wide Applications
Wide Applications: Can be widely mounted on ATV, UTV, SUV, motorcycle, 4X4 offroad, Jeep, truck, tractor forklift utility vehicle heavy equipment, hunting, camping, mining, marine etc
Randy Hernandezd
Reviewed in the United States on March 5, 2025
Easy to install and very bright
D.K.Dowsett
Reviewed in the United States on March 3, 2025
I bought these to go into my 02' Ford Rangers bumper. It comes with a template and I cut my back bumper out and installed these. I've had these over a year now, and they are very bright and beautiful to this day
Derrick Crosby
Reviewed in the United States on March 21, 2025
I have purchased many light brands for my vehicle and this brand by far is the best bang for your buck. They last. I live in the northeast where the roads are heavily salted in the winter and they continue to hold up to the abuse where my other brands quickly deteriorate. Also super bright!
JP
Reviewed in the United States on March 16, 2025
Very Bright. Installed on rear bumper of F-650 to illuminate trailers, etc when hooking up at night.
Jonathan
Reviewed in the United States on March 13, 2025
A fantastic OEM fog light or Day-Time Running Light replacement for my Hummer H2, fit perfectly in the OEM holes, could also be great for a number of other applications. I use all of their lights on my rig including pods, light bars, and now these fog lights. Genuinely really good for the cost, have gotten them super wet, under water, etc. Never gone out on me!
Cole Pollard
Reviewed in Canada on April 6, 2025
Bright lights easy to install
Adam
Reviewed in the United States on December 29, 2024
Originally bought these for my plow truck, but never got around to installing them. We bought a 36’ diesel pusher RV and had a two week long cross country trip coming up not long after buying it. Knowing I’d be in dark areas and unfamiliar territory, I felt it was necessary to upgrade the junk factory reverse lights by adding these. They look great, don’t flicker, and are very bright at night! So far they still work great with no moisture or water intrusion even after multiple washes and 5200 miles of driving. Came with everything needed to get them installed on the bumper, but did not include any wiring or switches to get the power to them. Great price though and I’ll be buying more for my other vehicles! So far I’ve had zero issues with any of the NiLight products I’ve purchased
Rob
Reviewed in Canada on November 23, 2024
They survived and accident at 50kmph and the housing isn't even broke will buy again
Arthur Klein
Reviewed in Mexico on December 31, 2023
Se sienten bien aúno los instalo pero se ve de buenos materiales después actualizo la reseña
Alejandro
Reviewed in Mexico on October 19, 2023
Muy buena calidad y la luz blanca
John a
Reviewed in the United States on May 25, 2022
These are bright, but much more of a scattered flood than I was hoping for there's not much focus if any for the light beam. I have other nitlight lights on another truck they are a little smaller and have a more focused beam to them. Install is straight forward and difficult do to my choice of 1/4" diamondplate on my homemade bumper should be easy on anything else just make sure you aren't planning on cutting the holes with a 4.5" grinder there's no room for the corners to cover any overcut. So I started with grinder ended with Sawzall. They look nice very low profile now I just need to figure out how to keep them from lighting up the sky and keep them a bit more tamed toward the ground. This is not a defect just a flood light with a very impressive spread more than my personal preference
Kale Chuk
Reviewed in Canada on January 30, 2021
Purchased to install as auxiliary back up lights on my truck. Very happy with them, very bright, nice clean white light. More of a spot than a flood, but really nice lights. Not sure on reliability yet, but seem like pretty decent quality foe the price.
DanSpurling
Reviewed in the United States on February 10, 2020
Wasn't too sure about these when I saw them online. I was expecting something cheaply made and something that felt equally cheap in my hand. I was pleasantly surprised when I opened the box and unpacked the contents. Everything was well packaged and nothing was scratched or damaged. The lights are heavy gauge metal body construction and are very sturdily built. I wouldn't recommend using the cardboard template though. U installed the first one without using it and everything came out good. Using the template, the holes were off a little and had to be bored out a little larger in order to get the bolt through the hole. Just slide the light through the cutout you make then mark the mounting holes and drill - perfect fit. I can't wait to see the difference these things make. As you can see in the picture, the bag contains bolts, buts and washers. It also contains an allen wrench to tighten the bolts.I could barely tell when my factory reverse lamps came on. After installing these lamps, I can clearly see when I am backing up. I get great illumination at least 50 feet behind my truck now; more than enough to safely back up without worry. I hope to get a long life of use from these, but if I were still deciding on which set to buy, I'd choose these.As I was installing them, a neighbor came by and said they looked great on the truck and that they didn't look aftermarket or out of place at all.All-in-all I would say the install is fairly easy with minimal "mechanical knowledge" required. Tools required: 4 1/2" grinder to cut through the bumper, needle nose vice grips, marker, drill with bit. On a 1 (easy) to 10 (hard) scale I'd give the install procedure a 2.The last picture shows the lights on. You can see the OEM reverse lights under the tail lights Huge difference.******UPDATE******About a week after installing the lights, I noticed one light was not working. I have not figured out yet what the problem is. I was thinking it was shorting out but that doesn't seem to be the problem. If I tap the back of the light, it will turn on (as long as it is suppose to be on). Now I am thinking it is defective.
Recommended Products