Your cart is empty.
Your cart is empty.
Our Screen Is High Quality LCD Display Touch Screen Digitizer Assembly Replacement with frame For Google Pixel 6 Pro
Product Description:
-Metarial: OLED
-Model: GLUOG, G8VOU,GF5KQ
-Size: 6.7 inches
-Resolution: 1440 x 3120 pixels
-Suitable For: For Google Pixel 6 Pro LCD Display Touch Screen Digitizer Assembly Replacement with frame
-Package Including:
1x LCD Touch Screen Assembly Replacement
1x Free Double-sides Adhesive Tape
1x a set of install kits
Installation Precautions:
1. Check whether the product is in good condition and test it before installation. Do not remove protective film or labels during testing. Watch out for static issues.
2. The screen is glass, which is a very fragile product. Testing before installation is strongly recommended
3. Do not bend the cable. During installation and testing, make sure the LCD cable is not bent.
4. If your phone has a black screen during installation, press and hold the power key and volume key at the same time. If the phone vibrates, it's because the mainline is not installed properly. Then reinstall the product.
5. If you are not professional in maintenance, or have no experience in repairing electronic equipment, we do not recommend you to replace the screen by yourself. Take it to a repair shop for help to save you time and money. Or find the relevant installation video on the YouTube platform and follow the installation steps to install.
MplsVonD
Reviewed in the United States on March 6, 2025
My kit didn't include glue kit or double sided glue tape! It's a basic pixel 6 pro screen with digitizer kit. It's NOT the products fault that the fingerprint sensor NEED TO BE CALIBRATED to work properly, and if you're like me, your sensor may have broken when your screen broke, so grab one with this kit! Quality is ok, not as nice as the original, but this is NOT easy to install on your own if you have no experience. Make sure to really clean the old glue with alcohol!💡 Hint: put uncooked, dry, plain rice or barley in a sock or nylon stocking, close the end with a rubber band or zip tie, heat on high in the microwave a couple minutes > GREAT to heat the glue to remove the screen! 🔥 Also, you'll need a Torx t3 bit (screwdriver)🪛 to remove the screw that holds the ribbon cable in place- don't strip the screw like I did (then you'll have to carefully gouge a line and use a precision straight screwdriver). 😅
Guadalupe l.
Reviewed in the United States on March 26, 2025
No es el mejor producto pero funciona.
Ben
Reviewed in the United States on March 23, 2025
THIS SCREEN IS AMAZING REPLACEMENT SO FAR
Aaron Milan
Reviewed in the United States on March 19, 2025
I don’t know if the screen works because I can’t remove the original due to the screwdriver not being the right shape or size.
JJo
Reviewed in the United States on August 30, 2024
Revised: seller has given me refund for the item. Good customer support.----------------------------Screen functions in overall but has several issues.- Fingerprint sensor no longer works despite the fact that I migrated the sensor from the previous device. I have even done the fingerprint software update from Google but in vain. The hardware does not even recognize it because the fingerprint option has disappeared from settings.- Screen color has a cyan tint.- Screen refresh is slow and scrolling is choppy.Next time, I would spend a bit more money and get the Genuine OEM Part.
yaaargle
Reviewed in the United States on June 2, 2024
The installation didn't start off good since, as someone else mentioned in the reviews, they included the wrong size torx driver to remove the bracket that secures the connector to the phone. The fitment was perfect, however, and the included double-sided adhesive tape was more than adequate.Upon starting the device after the installation, I got the dreaded black screen of death. The boot up screen with Google logo appeared, but once the boot up sequence was complete, the screen was black. It still made the vibration from haptic input and sound. I was able to restart the device by holding the Power and Volume Up button for 20 seconds, and that temporarily fixed the no display issue, but after turning the screen on and off a few times the issue resurfaced. I was able to replicate this issue consistently, and was about to give up and get a new phone until I noticed, during one time I turned the screen on, the phone's resolution and aspect ratio messed up. I then remembered I had changed the screen resolution from "Full" (1440x3120) to "High" (1080x2340) in the Display settings, so I changed it back to Full and the problem hasn't come back. BSOD on Pixel devices is something Google is aware of since Pixel 5, and we are now at Pixel 8 and they still haven't fixed the issue yet. I never had the BSOD issue with my OE phone, and for it to happen after I installed the aftermarket screen probably means the problem is both hardware- and software-related.Image quality. Everything looks sharp. The biggest issue I can see is the fact the color balance is off, with (barely) noticeable green tint compared to the original screen. The screen is usable, but you can definitely notice the color balance is somewhat off.The touchscreen works fine. No dead spots on the one I got.Fingerprint scanner is another matter. Even after going through the installation of the fingerprint scanner driver from Google, the fingerprint option just doesn't work. That may be due to Android OS, and not the replacement screen.
Dan
Reviewed in the United States on June 10, 2024
It's a LCD screen and not a LED. So, if you use your screen, it drains the battery and gets very hot. fingerprint reader is iffy - I couldn't get it to work, others have had success, I believe. It's an old phone, so probably need it to work for the next 5 months before I replace the phone.
Britten Fisher
Reviewed in the United States on May 1, 2024
Glass led began to fail 2 months in lines on left side with no screen damage,
Miguel Angel Martinez Rdriguez
Reviewed in Mexico on April 3, 2024
La entrega fue rápida, aunque el producto es maloLa pantalla curva la recorta, el touch no agarra bien del todo, la huella de plano no la agarra y la calidad de imagen es muy baja, los tonos blancos se ven verdes
Recommended Products
