Your cart is empty.
Your cart is empty.Customer
Reviewed in the United States on February 27, 2025
This black acrylic sheet cut beautifully on my 10w diode laser. It really stinks when it’s cutting, but it is burning plastic so I wouldn’t expect anything else. Make sure there is plenty of ventilation and/or wear a respirator to protect yourself. It made a smooth and precise cut- very pleased and will be purchasing again!
Jeanne Coppola
Reviewed in the United States on February 13, 2025
I needed a cover for my 11 1/2 inch clock that got cracked, and these clear acrylic sheets are perfect. I have to cut a circle and out of one of them. They come with a protective film on both sides and were carefully packaged in two plastic wrappers. Very nice!
Ray Phillips
Reviewed in the United States on July 31, 2024
I bought these to make a replacement cover for an infrared receiver on a vintage computer I was working on. I was able to score the sheet with a razor blade and snap it off to exact dimensions. I was also able to use a hobby file to file down the edges a little bit more to give myself some clearance. So this acrylic is easy to work with! I only used a couple inches of one of the sheets. But the rest are going in my electronics supplies in case I ever need to make another one!
Customer
Reviewed in the United States on November 26, 2024
Arrived on time and in good condition. Well packaged. As described in ad.
Sydney
Reviewed in the United States on August 23, 2023
My laser has been cutting this material pretty well. I have found that it is best to takeoff the top layer and leave the bottom on there for when you are trying to cut through or engrave on it. If you are trying to cut smaller pieces it is not advisable to try and bend them too much as they will break. Overall pretty good.
James Johnston
Reviewed in the United States on May 22, 2023
I thought this would be more transparent. Technically I suppose it is but the sun is the only thing you can see through it. I’m sure it would be great for welding or looking at an eclipse. Quality stuff, just extremely dark.
Sen Arroyo
Reviewed in the United States on February 13, 2023
I've come to understand that good cast acrylic is hard and brittle -- like it can shatter if you put it in a CNC mill and come at it too fast. Well, this stuff is soft and bendable (which, in my experience, usually smells a lot worse in a laser cutter), which makes me think it's not cast. However, I may be using those words incorrectly, so my apologies if that's the case!Also, the acrylic is hazy. If you have a project where transparency matters less, it's transparent enough. But I was using this acrylic to make my own set of light-up Disney ears so that haziness would be distracting.
Cherry jeanes
Reviewed in the United Kingdom on May 23, 2021
Brilliant stuff, I use it to protect my door from the dog jumping up easy to clean no sharp edges, quick delivery.
Graham
Reviewed in the United Kingdom on March 25, 2021
Got these to create a cover for a diorama - their just great for this
Rabbit
Reviewed in the United Kingdom on March 24, 2021
These are great but quite expensive the service and delivery were soot on though
millie
Reviewed in the United Kingdom on February 27, 2021
Great pieces for sons leopard gecko house. If you give a gentle rub with light sand paper you can frost parts to fit your needs. I simply can't ignore the fact that packaging these arrived in was not necessary, a 2ft x 2ft box for 2 (1 in other order) 1ft x 1ft ultra thin pieces of plastic is completely in ridiculous, the meters of additional paper cushioning adds to the question how many trees... A smaller box or card based mailing envelope would have given sufficient protection.
Mary
Reviewed in the United States on November 1, 2021
Ok, it is cheap. Both in money and in quality. Supposed to be clear; this 1/16" thick material is actually less transparent than a piece of 1/4" thick AZM acrylic. You get what you pay for. Also, it has thin plastic protective masking on only one side. The surface is quite soft so it is not well protected from physical damage. If you cut it with a laser, the plastic "masking" scorches badly leaving burn marks on the material itself. Cut it from the opposite side with a layer of masking tape. Greatly reduces scorching.
I. Packer
Reviewed in the United Kingdom on April 2, 2021
Just what I wanted but it’s supposed to be a pack of two but only one piece in the packet. Not very happy.
Recommended Products