Your cart is empty.
Your cart is empty.Package include: 1x Removal Tool, 8x Ball Tubes, 8x O'Ring Seals, 8x Steel Snap Rings, 8x Injector D-Rings, 8x Upper Injector O-Rings, 8x Lower Injector O-Rings, 8x Copper Crush Washers, 8x Outer Injector Harness O-Rings, 8x Inner Injector Harness O-Rings
Chris
Reviewed in the United States on September 2, 2024
Even.had o rings for the injectors 😎
All marroquin
Reviewed in the United States on September 22, 2023
Me gusto mucho la protección de el producto y lo rápido que llego
Dan Marcelino
Reviewed in Canada on May 10, 2023
Never buying cheap parts like these again. The time, money and effort put into trying to save 100 bucks isn't worth it when you can't get to work. Please don't buy these types of crucial parts from Amazon or eBay. Installed them in the second week of April and they have already failed and wasn't even operating the vehicle every day.
ChristieM
Reviewed in the United States on November 17, 2023
The orings and gaskets appear to be adequate. The nipples were unusable. When we installed them the nipples would not move freely. We installed the old nipple and they worked properly. We had already serviced the injector seals so we are using some of the remaining seals for a couple of injectors and saving the rest. If we have any other problems I will respond later.
tommy
Reviewed in the United States on February 12, 2022
Top injector seal is real soft I had to order seal from someone else
Cheap isn’t cheap
Reviewed in the United States on September 7, 2021
I found 2 of the nipple cup centers were not fully machined. I installed what I had to to get my truck up and running. I oiled them and the seals and put them in place but once I torqued the other cups in the rail they allowed no movement at all. I even dropped the torque 10lbs and tried to move them they still wouldn’t move. Also the white injector O-rings were mis sized and would fall off when held vertical. This is junk !!
zak
Reviewed in the United States on July 27, 2021
I want to return this items. Complete garbage. Nipples are machined to rough to be able to move when installed. Irving’s failed with after install air test. Not even a crank.
Billy B.
Reviewed in the United States on September 29, 2020
I was skeptical of the O-rings in this set, cross section too small , overall diameter too large. If I had nothing better to do but tear this engine apart, put it back together with this crap and test drive it for 5 miles just to have to pull it all back apart. This place should not even advertise the product they sell. Birds on all metal parts, nothing was checked for quality at this place, if they did, someone needs to be fired. Like the CEO for hiring inadequate Unknowledgeable people on this earth. Cheers to you. OEM OR BUST CAUSE THIS COMPANY GETS A NEGATIVE 10 review.............
racer
Reviewed in the United States on July 10, 2020
The nipple cups are absolutely garbage, sharp edges, full of metal shavings and burrs. It would take hours to clean them up! The top injector seals are questionable as to of they'll work, super soft and seem too thin in the middle to seal correctly. would have sent back, but i need the truck, so i used the cup o-rings and the tool. UPDATE: The injector top to nipple cup orings failed immediately, as stated, they seemed thin and apparently are! Absolute waste of money junk!
Recommended Products
$50.00
$ 22 .99 $22.99
$13.89
$ 7 .99 $7.99