Your cart is empty.
Your cart is empty.Product Description
It can be rotated 180° for the best reception angel
Installation
1. Select a best mounting location.
2. Place the mast through the mounting base of the J-pole.
3. Level up the mounting base and then mark the pilot holes to be drilled with a marking pen.
4. Drill the pilot holes (with a drill bit about half the diameter of the bolt) into the marked areas.
5. Line up the holes of the mounting base of the J-pole with the drilled holes.
6. Drill and then secure the lag bolts into the pilot holes.
7. If necessary, you may adjust the direction of the mast by loosening the two lateral nuts on the mounting base of the J-pole.
Need an antenna that comes with all mounting accessories?
Don't worry about searching for a suitable mounting pole, because one is already included in the box.
S. Wong
Reviewed in the United States on February 14, 2025
Great antenna mount. Very sturdy and very adjustable. Fits my PBD Antenna perfectly.
David L McCrary
Reviewed in the United States on January 25, 2025
Dropped UVerse. This was the best way to install an antenna to receive local channels. Have an eve overhang on deck. Step ladder, drill, socket wrench, coaxial connect and I’m good to go.
Stuart Rothrock
Reviewed in the United States on August 14, 2024
This came with lag screws and expansion anchors. It is rugged and should not need lateral reinforcements for use as it is. However, i also ordered three of their extensions. So I ordered their stand-off wall mount. I am using this configuration for a weather station.
gregh
Reviewed in the United States on May 17, 2024
I like it!The negative reviews are confusing-this isn't an antenna and it doesn't have a remote. It is simply a pole made to attach to an antenna. What am I missing??
JEAN
Reviewed in the United States on October 13, 2024
Haven’t put it up yet. Son and son-in-law deciding where to put it.
Dan
Reviewed in the United States on July 23, 2022
This is a very good product, especially at this price point. It is made of heavy gauge steel, and is painted. It is flexible in that the pole that comes with it is not symmetrical, so it can be mounted two different ways to allow you to position your antenna or weather station a little further from the building, or turn the pole around to get the device a little higher up. This is a nice feature. The instructions are straight forward, but a bit ambiguous in some spots. Example, the kit comes with 4 masonry bolts, 2 lag bolts, and 2 nuts and bolts to secure the pole to the bracket. The instructions state to use a 3/8” masonry bit for a “hard” wall, and a 5/16” bit for a “soft” wall. It is unclear what “hard” or “soft” refers to, and there is no suggested size for a pilot hole for the lag screws in wood. One thing that I think would be helpful is to turn the “mounting cradle” 90 degrees in the mounting bracket, so that the mounting holes for the bracket are on the left and right of the cradle, rather than above and below. In my situation, the bracket didn’t fit well, and I had to drill another hole in the bracket to make it work. The instructions also state that there is a different pole available, which I have inquired about. Customer service has been very helpful and responsive as well. Overall, I think this is a very good product, and would recommend it.
Adam
Reviewed in the United States on June 2, 2021
I ordered this to mount my starlink dish to the side of my house. I was stilling waiting for the dish to arrive in the mail so I didnt know the exact pipe size I needed but this popped up on my search for a starlink mount so I decided to get it. unfortunately the pipe is .25 - .5 inches too small in diameter and I had to order something else after the satellite arrived. This mount also seemed pretty flimsy when I was looking at it so I don't think it would handle a very big dish.
BluePetunia
Reviewed in the United States on March 11, 2019
This is simply a j pole mounting device so I did not rate remote or picture quality. It is fairly easy to install but antenna works much better very high in air. It can be installed on top of roof or just below peak of roof as well as lower on porch. I assume a longer j pole is not made by this company. I really would like to have a much longer one as reception is better the higher your antenna. The companies that make a 30” to 40” j poles do not fit this 1” diameter antenna; nor do most of the outdoor telescoping poles. They have yet to produce poles for the 1” diameter that the newest HDTV antenna have.
Recommended Products