Your cart is empty.
Your cart is empty.Product Description
DURASOLID PRODUCTS
DURASOLID Pinion yoke for Ford 9" with 28 spline pinion and a 1330 U/Joint size
Durasold forged Pinion yoke for Ford 9″, 28 splines.
Fits Ford 9″
28 spline
1330 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Made out of SAE 1541 alloy steel CNC machined.
Durasolid brand pinion yokes are extra strong & durable. “Forged yokes are stronger than billet yokes“
DURASOLID Pinion yoke for Ford 9" with 28 spline pinion and a 1350 U/Joint size
Durasold forged Pinion yoke for Ford 9″, 28 splines.
Fits Ford 9″
28 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Made out of SAE 1541 alloy steel CNC machined.
Durasolid brand pinion yokes are extra strong & durable. “Forged yokes are stronger than billet yokes“
DURASOLID forged Pinion yoke for Ford 9" with 35 spline pinion and a 1350 U/Joint size
Durasolid forged Pinion yoke for Ford 9″, 35 splines. Finish black oxide.
Fits Ford 9″
35 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Made out of SAE 1541 alloy steel and CNC machined.
Durasold brand Pinion yokes are extra strong & durable. ” Forged yokes are strong than billets yokes’
DURASOLID Mini Spool GM 8.2" Chevy 10-Bolt Mini Spool - 28 Spline
Durasolid BRAND NEW GM 8.2″, 10 BOLTS, 28 SPLINES MINI SPOOL FITS GM 10 BOLTS REAR END WITH 8.2″ DIAMETER RING GEAR & 28 SPLINES AXLE. MANUFACTURED OUT OF HIGH QUALITY ALLOY STEEL FOR GREAT STRENGTH. MINI SPOOL IS COMPLETE SPIDER GEAR REPLACEMENT THAT FITS INSIDE STANDARD OPEN CARRIER AND LOCK BOTH AXLE FULL TIME FOR INCREASED TRACTION.
Fits GM 8.2" Chevy 10-Bolt Standard Open (Non-Posi) Carriers
Provides Complete Lock-Up
Fits GM 8.2" Chevy 10-Bolt Rearend Applications w/ 28 Spline C-Clip Axles
Will Not Fit Posi Carriers
DURASOLID PRODUCTS
DURASOLID Mini Spool GM 7.5″, 26 Splines - Auto Black Finish
BRAND NEW GM 7.5″, 10 BOLTS, 26 SPLINES MINI SPOOL
FITS GM 10 BOLTS REAR END WITH 7.5″ DIAMETER RING GEAR & 26 SPLINES AXLE.
MANUFACTURED OUT OF HIGH QUALITY ALLOY STEEL FOR GREAT STRENGTH.
MINI SPOOL IS COMPLETE SPIDER GEAR REPLACEMENT THAT FITS INSIDE STANDARD OPEN CARRIER AND LOCK BOTH AXLE FULL TIME FOR INCREASED TRACTION.
DURASOLID Axle Bearing Puller Tool for Compatiable with Toyota (plate style)
Works on Toyota 8" rear differentials
Works with an impact gun or hydraulic press to safely and easily remove axle bearings– Pipe total length : 20″
–Pipe inside Diameter : 1.50″ , Compatible with 2003 & down models only.
–Flange Diameter : 3.86″ . Plate style axle bearing puller
Note : (Will not fit 2007+ Tundra Rear Axles And 2003 Toyota Sequoia SR5.) Compatible with 2003 & down models only.
DURASOLID Carrier & Pinion Bearing Puller, Compatible with Dana 30,40,50,60,70, 80, Ford 10.25" Bearings, Pinion Puller Tool with 3 Clamshells
CARRIER & PINION BEARING PULLER KIT, DANA 30 44 60 70 80 FORD 10.25″, 10.5″
–3 DIFFERENT SIZE HARDENED ALLOY CLAMSHELLS MACHINED DIFFERENTLY ON EACH SIDE GIVING DIFFERENT USABLE TOOLS.
–WHITE CLAMSHELL USED FOR LARGER REAR ENDS LIKE DANA 70 HD, 80, FORD 10.25″ & 10.5″
–HIGH QUALITY RETAINING RINGS, ADJUSTING COLLARS & HANDY BENCH TOP.
–WORK ON MOST STANDARD SIZE CARRIER BEARINGS/ PINION BEARINGS ON DIFFERENTIAL UPTO & INCLUDING DANA 70, 70HD FORD 10.25″ ,10.5″ WITHOUT DAMAGE. ” ( not suitable for off-highway Dana ).
(This tool is not used for removing pinion bearings on Dana 80.)
Durasolid Mini Spool for GM 8.5" Differential with 28-Spline Axle
Compatible With GM Chevy 8.5"(10 bolt), with 28 Spline Rear Ends 1972-1987;Will fit standard open (will not fit posi/locker type carriers)
Feature: According to the original factory specifications,perfect match for the original car;Made by high quality material, lightweight, anti-rust, colorfast and durable.
Specifics:Placement on Vehicle:Rear; Carrier Style: Mini spool; Differential Case Design Type: GM 8.5"; Axle Shaft Spline Quantity:28; Cover Bolts:10