Your cart is empty.
Your cart is empty.Product Description
Powerbuilt 18 Pc. Master Axle Puller Kit
Old or rusty axles can be a chore to remove without a little help. This innovative master axle puller kit has hub pullers for both front and rear wheel drive vehicles making it easy to remove stuck axles safely.
Set also includes two and three jaw pullers and a slide hammer to give you enough force to remove seals and bearings without damage. The slide hammer doubles as a dent-puller for bodywork.
Any specialty tool will help make an automotive repair or maintenance task easier, but Powerbuilt automotive installer tools take the concept of ‘help’ a big step further. It starts with the storage case – heavy duty design ensures it will stand up to years of use and abuse. Inside the case lid you’ll find how to instructions and photos that show step-by-step usage instructions.
The finishing touch? All Powerbuilt installer kits meet or exceed ANSI and/or ASME standards so you can buy with confidence knowing you’ll get quality.
Kit Services: most passenger vehicles
Set includes
- Lock Cone for Jaw Puller
- 3/4” (D) x 2-15/16” (L) Hook
- Nut 2-1/4” (D) x 9/16” (L) Hole
- 3.75”/4.5” FWD Hub Puller
- Two Jaw Yoke Head and 2-1/4” Tapping Screw
- 5/8” Locknut and 5 lb. Slide Weigh
- Grade 5 Shoulder Bolts (3)
- Three Jaw Yoke Head and 5/8” (D) x 23” (L) T-bar
- 4.5”/5.5” RWD Hub Puller
- Storage case
Ðeath
Reviewed in the United States on March 9, 2025
I bought this to do my rear wheel bearings. and it did the job perfectly. I would highly recommend if you need a slide hammer / pull tool to get this one.
Kenneth G.
Reviewed in the United States on March 23, 2025
I recently received it quickly and was very impressed with it. The slide hammer feels solid and has some decent weight to it. And the components/attachments are also good quality. Sadly, I didn't get to use the slide hammer function to pull the the rear axle from my 99 WJ because after I removed the 4 mounting nuts, I just gave a little tug on the axle hub with my hands and the axle just slid out. That will probably never happen again! But I was able to use the claw components to pull out the bearing race from the axle tube and with ease. I would definitely recommend this axle puller set for pulling axles. I am now just waiting for my front hub bearings to arrive so I can use this to remove the old hub bearings.
Mike Whitmire
Reviewed in the United States on January 31, 2025
Very nice tools
Billy W Scott
Reviewed in the United States on April 4, 2025
Worked great
VP
Reviewed in the United States on September 21, 2024
If a good old hammer doesn’t knock it loose this certainly will in my experience. I haven’t met a hub assembly or bearing I could get out with it! For the price it’s a nice tool to have around. I would say that I use a towel around the handle and whip it back instead of my hand, while both work you seem to get more leverage or force this way. Best of luck!
B. Daniels
Reviewed in the United States on July 26, 2024
Just opened the set. Have not used it yet. But I did pull each piece and every piece looks solid with a decent finish. There is a lot of capability with this set which should meet my needs on my Jeep Wrangler YJ. The case also is solid. This set should provide a lot of great use and pay for itself quickly.
Isidro a.
Reviewed in Mexico on October 26, 2024
Está bien la herwmaienta biene con una variedad de aditamentos y Seve exelente
عبدالاله العمري
Reviewed in Saudi Arabia on November 6, 2023
تم استخدامه على دفرنس كراون فكتوريا تقدر تطلع الصوف والرمان دفعه وحده وفيه مقاسات مختلفه لمختلف الدفرنسات
Adam
Reviewed in Canada on May 24, 2021
If you've got your car up on jack stands or a lift, and are stuck because the hub is seized or the axel splines seized , Just get this tool. took me 5 minutes to get it off after hours of using a hammer, blow torch, and many other methods.Worst case if you use it once you can sell it on marketplace or kijiji and get most of your money back .
Nozm
Reviewed in the United Kingdom on September 24, 2018
Excellent item and cheaper when I bought for only £14.27. I believe the quality is good although it was made in Taiwan. Plus the included users' manual, hinged inside the robust case, is nicely presented.The product description stated for Ford vehicles but this tool can also be used for other car makes. Excellent and fast delivery service by Amazon prime. I highly recommend this product.
Simon sparks
Reviewed in the United Kingdom on June 22, 2018
Better than using a socket to drive a bearing could be useful to write the sizes in metric also....
tronbrain
Reviewed in the United States on October 4, 2012
I needed an odd-sized bearing tool, one that fits a 74 mm diameter bearing. This was the only kit I could find that had it. Much to my surprise, the kit worked very well and had everything needed to make the job go easy. This tool has more available sized bearing discs to fit the non-standard metric (European or Asian) bearings that are out there, which makes it a good value. Though I wasn't sure about what sizes are included in the kit - that info doesn't seem to be listed anywhere - I called AllTrade, which is located in California, and the service people were able to tell me that it had the size tool I needed.The quality of the pieces looks very good. I would expect the parts to hold up just fine. Everything in this kit is black zinc-plated steel, not aluminum as with the less expensive kits. Unlike the other reviewer, the threaded bolt held strong during my job. Make sure if you are using an impact wrench to drive the bolt that the bearing disc is completely pressing on the bearing, and NOT on the knuckle. It can bind up on the knuckle sometimes, in which case I would expect the impact wrench to strip or snap the threaded stud, quality of the part notwithstanding.If you plan to use the bolt and an impact wrench to drive the bearing out instead of a press, make sure you have a 32 mm (impact) socket to turn the main drive nut. I used a Tekton 32 mm impact socket impact bought here on Amazon, and it worked perfectly. The head of the bolt is 28 mm, which I held fast with an adjustable crescent wrench.
Recommended Products
$33.99
$ 16 .99 $16.99
$22.59
$ 9 .99 $9.99